Glow Bricks MILLENNIUM FALCON LEGO 75105 User manual

LED Installation Guide

Remove the cannon on top
Remove the antenna

Bottom light (comes with a black plate)
Turn over the ship
Install 4 lights on left

Install 3 lights on right
The black one at the back
Turn it back upright, take off the hyperdrive tube

Move the wire of bottom light inside the ship through the gap
Hyperdrive light
Move the gray plates to both end of hyperdrive light

Install the hyperdrive light and move the wire inside the ship
Beam and cannon lights
Install the cannon light

Install the beam lights
Remove the front tip of the ship

Remove the cockpit window
Remove the other tip

Round the wire at the black pin
Put the tips and cockpit window back

Put the cannon back
Cockpit and front hull light (comes with a clear plate)

Install the clear light plate
Install 2 dark grey plates next to clear light plate
Install the light grey plate beneath the loading door between the tips

Install the other 3 dark grey plates
Back hull ights
Install dark grey plates on the hull plates

Pass one light gray plate to the other side
Install the light gray plates beneath the arch on both side

Connect 5 connectors to USB plug
Plug in and done!