Glow Bricks FRIENDS Lego 21319 User manual

1

2
First take off the right spot light, remove the clear 2x2 round plate and replaced
by the lighting part, and peel off the white tapes to stick on the spot light

Put the spot light back to the position then install the green lighting plates as shown
3
This is how it looks like after installation, and mind the direction of the wires
Otherwise it may not long enough

Remove the gold plates and assemble with the lighting parts
4
For the other lighting part, do the same thing for the spot light as the previous steps
Also mind the direction

Restore the spot light, two wall lights and the candles stand
5

Now for the lighting green round bricks, install on the first pole, pull the wire to the
ground then to the middle pole
Then repeat the steps to the 3rd pole and will look like this
6

For the remain lighting yellow round plate, install it at the table besides the pole
7

8
Connect the plugs to the USB cable and that’s it