Glow Bricks Lego Carousel 10257 User manual

Remove the clear yellow plates at the bottom

Remove the clear yellow plates at the top

Detach the long white poles

Remove the canvas

Battery box

Install one battery box on white plate
2 strings of clear yellow lights with black wire for carousel top

Connect 2 strings of lights to battery box
Detach 6 crowns

Install one string on the top
Put the crowns back
Install the other string at the bottom

Flashing light Plates

Connect short wire light plates to battery box
Install the light plates at the bottom by both hands
Install all 6 light plates round the inner carousel

Install another battery box on the other side and connect the long wire light plates
Install all 6 light plates beneath the grey plates round the outer carousel

2 strings of lights with grey wire for carousel bottom
Rotate the grey wire round the grey pole

Connect to battery box
One string of clear yellow lights for each level

You can hold the wall inside the carousel by your finger
If you want to hide the wire, put the wire behind the dark blue tile for upper level light string

And press the wire under the rotating stage for lower level light string
Rotate the carousel by hand to make sure all wire okay
Put the long white poles and canvas back

Switch on both battery boxes through the canvas
Done