Glow Bricks Gingerbread House Lego 10267 User manual

1

Install the lights as shown, replace the lighting round plates to the tree (trans-orange
replace the gold round plate)
2
Before installing the x’mas tree lights, break up the tree first

Then put the remain lighting round plates on then the tree is done
3
Put the green plates with lights on, adjust the wires then put the remain green plates

Start with taking the front door out as shown
4
Then assemble the lamps of the front door with the lighting black round plates
Then install the lamps and the 1x4 light as shown

Put the door back and beware the wire has to be in between the studs or it will be broken
Before assembling the flames to the fireplace, take the following parts away
5
Assemble the flames

Then restore the outer side of the fireplace first
To restore the fence, first we insert as shown then push it upward
6

After restoring the fireplace, install the candles and ceiling lights as shown
Then put the sofa back
7

To pull the remain lighting parts to the 2nd floor, remove the parts as shown first
8
Pull the connector out as shown and leave it

Pull the lighting parts to 2nd floor, to make it looks nicer you can hide cable as shown
9
Then install the 1x6 lighting part

Then remove this part in purpose to let the wires go through
The 1x2 lighting part is installed in the red circle area
10

Pull the remain lighting parts over and replace the lamp parts
11
Then install the lamp and the lighting plates

Restore the part back then we can go to the next step
Take the white plates away
12

13
The long lighting plate is installed as shown

Now you can install the remain light
14
Before install the lighting parts, you can take the smoke pipe the these white parts
away first to make it looks better and easier to connect to the other side

The connectors can be hidden as shown, then put the smoke pipe back
15
Install the lights then connect the wires

16
Remove the parts and white plates as shown to install the lights

Then connect all the connectors to the USB cable and light them up
17
Hide the wire to make it looks better the put the roof back