Grandview GRUC070V User manual

Grandview Scissor Lift
Portable Screen
User Manual
Protecting your screen
To ensure long lasting viewing enjoyment
keep the screen rolled up when not in use.
Check both the front and back surfaces
before retracting into the case to make
sure it is free of dust, dirt, insects or other
foreign matter. Use a soft brush or cloth to
lightly remove any foreign particles.
Cleaning your screen
Use warm water with a mild detergent
to remove any marks on the surface
(only dab, do not rub) or screen casing.
Immediately dry the screen with a soft
cloth or towel. Do not leave it to air dry.
Never use any solvents, chemicals or
abrasive cleaners on the screen surface
as they can permanently damage
the screen surface.
Size Format Image (mm) Case
Length
(mm)
Weight
(kg)
70” 4:3 1420 x 1065 1585 5.2
80” 4:3 1625 x 1220 1790 6.0
100” 4:3 2030 x 1520 2190 7.2
70” 16:9 1550 x 870 1710 5.4
80” 16:9 1770 x 995 1930 6.1 ambertech.com.au
1800 251 367
or[email protected]om.au
Imported and distributed in Australia by
ambertech.com.au

To the owner
Congratulations on purchasing a
Grandview Scissor Lift Portable Screen,
designed to produce the sharpest, most
pleasing pictures with
maximum convenience.
Packing the screen away
Hold the handle and slowly retract the
screen into the casing. Snap the handle
into the base.
Fold away the feet in line with the casing.
Retraction is complete.
.
Pull the handle, releasing the lock as
shown below.
Pull the screen up and stop at the
desired position.
Assembling the screen
Lie the screen flat on the floor and swing
out the feet so that they are perpendicular
to the casing.
Release the handle
Handle
Front view
Press gently
Handle base
Front base
Handle base
Foot Casing
Front view Top view Side view
Top view
Front view Back view