Grandview GRUC040V User manual

Grandview
Micro Pull Up
User Manual
Quality features
Super light weight and super portable, the
Grandview Micro Pull Up Screen is perfect for:
The Business Traveller•
Expos and Presentations•
Micro-projectors•
Or anywhere where a small but effective
projected image is needed.
What’s an aspect ratio?
An aspect ratio is the shape of the projected
image and it changes depending on what you
are watching. Overhead projectors are mostly
square; TV is mostly 4:3; movies can be 16:9
(also known as widescreen) or even wider like
cinemascope. Sounds confusing? It can be.
GV Micro Pull Up screens overcome this
problem by being completely flexible – they
suit any shaped output at all.
So just sit back and enjoy.
ambertech.com.au
ambertech.com.au
1800 251 367
or[email protected]om.au
Imported and distributed in Australia by

To the owner
Congratulations on purchasing a Grandview
Micro Pull Up Screen, designed to produce
thesharpest,most pleasing pictures with
maximum convenience.
Protecting your screen:
To ensurelong lasting viewing enjoyment,
always keep the screen rolled up in its
protective case when notin use. Always
examine both the front and back of surface
before retracting the screen into its case to
make sure it is free of dust, dirt, insects or
foreign matter. Use a soft brush or cloth to
gently remove anyforeign particles.
Cleaning your screen:
NEVERattempt to useanysolvents,
chemicals or abrasive cleaners on the
screen. Use a mild detergent with warm
water to remove any marks on the surface
or screen case. Always immediately pat
dry the screen with a softcloth or towel
after cleaning.
Do not rub screen image area
When unlocked slowly pull the screen up
to the desired height.
Using your screen:
Position thescreen facing the projector on a
flatsurface. Releasetheleg supportfeet as
shown below.
Fig 1 Fig 2
Fig 2.1
Fig 2.2
Your screen isnow ready for your
viewingenjoyment
Turn thesupport feet parallel to the casing.
Fig 4.1
Fig 4.2
Fig 4.3
Putting your screen away
Slowly push thescreen down and ensure the
cover is locked into thecasing.
Fig 3.1
Fig 3.2