Ingenico AXIUM DOCK User manual

AXIUM DOCK
User Guide

2
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
Contents
1_Introduction
2_Presentation
2_1 Content of the box
2_2 Overview on the AXIUM DOCK
3_Use of the Docking Station
3_1 Power on the device
3_2 Docking / undocking of the D7
3_3 AXIUM D7 charging
3_4 Advance paper
3_5 LED information
4_Installation
4_1 Recommendations
4_2 Docking Station connections
4_2_1 USB slots
4_2_2 Charging contacts
4_2_3 NFC interface for Bluetooth paring
4_3 Paper roll
4_3_1 Main characteristics of INGENICO paper
roll
4_3_2 Installing paper roll
4
5
13
5
9
13
12
7
9
9
10
12
15
11
13
14
15
16
11

3
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
4_4 Ethernet connection over WIFI
4_4_1 Software conguration
4_4_2 Factory default settings
4_4_3 Firmware upgrade
4_4_4 Emergency rmware upgrade
4_4_5 Change settings
5_Recommendations
5_1 Securisation
5_2 Safety
5_3 FCC/IC Compliance
6_Environment (WEE, Batteries and
Packaging)
7_Troubleshooting
8_Marking
17
17
19
20
20
21
22
22
25
25
26
22
23

4
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
1_Introduction
We hope that you will be fully satised with your new Docking Station
for AXIUM D7 terminal.
Read this guide to understand and make the best use of this accessory.
It presents you the necessary information about use, installation,
maintenance, safety and security recommendations.
WARRANTY / SECURITY
Use only the power supply included with the product to
ensure best performance and safety. Maintenance should
only be provided by Ingenico authorized technician.
Failure to comply with these instructions will void the
manufacturer’s responsibility.
This symbol indicates an important Warning.
This symbol indicates a piece of advice.

5
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
2_Presentation
2_1 Content of the box
User guide
AXIUM DOCK station
Charge contacts for Axium D7 charging.
The AXIUM DOCK is an accessory for AXIUM D7 POS terminal.
It offers different types of functions:
3 USB slots
Ethernet connection through a Wi router (option)
The AXIUM DOCK embeds a thermal printer

6
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
ADVICE
Keep the packaging. It must be re-used whenever the termi-
nal is shipped.
WARNING
The power supply unit provided with your equipment
is specially designed for Ingenico terminals. Do not use
any other power supply. The use of a power supply with
apparently similar voltage/current characteristics may
damage your terminal.
8V-4V Power supply
Magic box cable (option)
Power cable

7
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
Docking Station unit
USB connector
2_2 Overview of the AXIUM DOCK
Charging contact +
USB interface
Power Supply
Led
Led for Bluetooth
connection (Blue)
Advance paper
key
Printer door

8
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
Compartment below the docking
Ethernet connection
Power supply connection
USB connection
Ethernet
connector
(option)
Power
Supply
connector
USB connector
Weight 780gr
Dimensions (L x w x h) Terminal : 122 x 212 x 117 mm3
Electrical mains network 100-240VAC / 50-60 Hz - Class VI
equipment
Connections on station 3 USB slots
Charging contacts + USB interface
through the tablet
1 Ethernet port (option)

9
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
3_Use of the DOCKING STATION
ADVICE
Before to use the Docking Station, always check if the paper
roll is present.
3_1 Power on the device
To power on the station it is necessary to connect the device
to the electrical main network through the power supply unit
provided with the station.
Power
connection
3_2 Docking / undocking of the D7
In order to charge the D7, you have to dock it on the station.
This action is automatic by sliding down the D7 on the terminal
support as per below.

10
900035196 R11 000 04/0319
Copyright© 2019 Ingenico
All rights reserved
AXIUM DOCK
3_3 Axium D7 charging
The Axium Dock allows to charge the Axium D7 through the
contacts spring on the tablet holder.
The Axium Dock offers a 5V voltage with a maximum current
of 2A.
Charging
contacts
In case you need to undock the product, please action the dedicated
button on the station as per below.