Mutsy Evo User manual

EVO
instruction manual

6
5
4
10
3
2
1
16
15
14
17
13
12
11
9
8
7

1
2
1
2
2
12
2
a
b
e
f
d
c
g
h

1
2
click!
click!
click!
i
j
m
n
l
k
o
p

click!
1
2
3
q
r
v1
t1v2
t2
u
s

click!
z2
y1
x
y2
w

EN Instruction manual Mutsy Evo
FR Mode d`emploi Mutsy Evo
ES Manual de instrucciones Mutsy Evo
EN
FR
ES

2
Content
Introduction........................................................................................................... 2
Warnings................................................................................................................ 2
Warranty................................................................................................................ 4
Maintenance and points for attention.................................................................... 5
Content of the box.................................................................................................. 6
Enumeration pertaining to the drawing................................................................. 6
Assembly ............................................................................................................... 6
Orientation ............................................................................................................ 7
The frame............................................................................................................... 7
The wheels............................................................................................................. 7
Steering ................................................................................................................. 8
The brake ............................................................................................................... 8
The push bar .......................................................................................................... 8
The pram body....................................................................................................... 8
The seat.................................................................................................................. 9
The Maxi-Cosi car seat.......................................................................................... 12
Introduction
·In order to make optimal use of this product we recommend you use it
properly and maintain it well. Read these instructions for use carefully
before you start using the pushchair and keep the instructions for future
reference.
·Should you have any questions, comments or complaints then contact
your retailer.
·If you want to know what accessories are available for this product or if you
want to stay informed of new Mutsy products then go to www.mutsy.com.
⚠WARNINGS
general
·WARNING: Read through these instructions for use carefully, and keep them in a
safe place for future reference. Failure to observe the instructions for use may put
your child’s safety at serious risk.
·WARNING: You are responsible for your own child’s safety. Never leave your child
unattended.
·WARNING:Avoidserious injuryfrom fallingor sliding out.Always usethe vepoint
safety harness.
·WARNING: Ensure that the frame and handlebar are completely unfolded and that
all locking devices are engaged before use.
·WARNING: Check that the pram body or seat unit or car seat attachment devices
are correctly engaged before use.

3
EN
·WARNING: Do not let your child play with this product.
·WARNING: Never leave your child unattended, this can be dangerous.
·WARNING: Always check that the accessories have been secured properly before
you start using the pram.
·WARNING: Only use the pram for one child at a time.
·WARNING: Always apply the brakes when parking the pram.
·WARNING: Makesurethatthebrakesareappliedwhen placingorremovingyourchild.
·WARNING:You must take your child from the pram before lifting the pram or using
stairs, escalators or lifts.
·WARNING:This product is not suitable for running or skating.
·WARNING: Use only replacement parts supplied or recommended by Mutsy.
safety during adjustment
·WARNING:To avoid pinching of ngers, keep children away from the frame when
folding and unfolding the product.
·WARNING:When making adjustments ensure that all parts of the child’s body are
clear of any moving parts
seat
·WARNING:The seat unit is suitable for children from birth up to 55 lbs. (25 kg) and
up to 42.7 in. (108 cm) in height.
·WARNING: C hild may slip into leg openings and strangle. Never use in fully re-
clined position of the seat unless the child is properly secured with the 5-point
safety harness.
·WARNING: Always secure your child with the 5-point safety harness combined
with the strap running between the legs.
·WARNING: After unfolding the seat, always push the bumper bar to its upright
position before placing a child in the seat. Make sure that no child is near the
bumper bar when moving it.
·WARNING: If your child is younger than 6 months always use the pram body or the
fully reclined position of the seat.
·WARNING: Always use with bumper bar attached in pushchair mode.
pram body
·WARNING: The pram body is suitable for children from birth up to 33 lbs. (15 kg)
and up to 30 in. (76 cm) in height
·WARNING:The pram body is not suitable for children who can sit or turn indepen-
dently or who can raise themselves on their hands and knees.
·WARNING:The pram body can only be used on the frame and not as a standalone
cot. Never leave your child unattended.
·WARNING: The pram body has a number of bags. The maximum permissible
weight in each bag is 2 Lbs. (1 kg)

4
·WARNING: Do not use the pram body with a mattress thicker than 25 mm / 0,984
inch. Do not add an additional mattress.
·WARNING: Remove the carrying handles and keep them out of children’s reach
when the pram is in use.
stability
·WARNING: A shopping basket is located between the wheels underneath the
frame.The maximum permissible weight for this basket is 22 lbs. (10 kg).
·WARNING: Bags, accessories or both, other than recommended by the manufac-
turer, can, when placed on the product, result in an unstable pram. Exclusively use
original Mutsy accessories.
·WARNING: Overloading can result in a dangerous, instable situation.
·WARNING: Shopping bags or other heavy objects must not be hung on the push
bar due to the risk of toppling.
·WARNING:This product may become unstable if a parcel bag or parcel rack, other
than one recommended by the manufacturer is used.
·WARNING:You need to tilt the pram on its rear wheels if you want to get on or get
o the kerb.
car seat
·WARNING:The maximum permissible weight as indicated on the relevant product
applies when using a car seat.
·WARNING: For car seats used in conjunction with the frame, this vehicle does not
replace a cot or a bed. Should your child need to sleep, then it should be placed in
a suitable pram body, cot or bed.
·TheMutsy Evohas been approvedaccordingtothe ASTMF833-13b and SOR/2016-
167 standards.
Warranty
There’s a warranty term of 2 years for all Mutsy products, starting the day
of purchase. When a production error can is found, Mutsy will provide
a solution in cooperation with the retailer. Reparation of such faults are
covered by the warranty. The warranty is not valid on exchanging or re-
turning of Mutsy products.
The warranty is only given if you provide the retailer you purchased the
product from with the following:
·a lled in warranty card
·a copy of your proof of purchase
·a clear description of the defect
·the product itself

5
EN
The warranty card can be found at:
www.mutsy.com/usen/service/warranty
Please complete this card in full and correctly and return by e-mail. You
are also asked to enter the serial number on the card. You will nd this
number on a white sticker on the product, usually underneath.
The warranty does not cover:
·fading or changing of colors
·water damage to the lining
·defects as a result of using Mutsy counterfeited products
·a claim without the proof of purchase
·unjust or improper use
·wear from normal daily use of the product
·damage from bad maintenance, neglect or an accident
·damage after alteration by the customer, unauthorized by Mutsy
·damage reported after more than 2 months after occurrence
The guarantee provided by Mutsy does not cover any shrinkage or defects
of the fabric parts that may develop as a result of cleaning the fabric parts.
Safety is extremely important to Mutsy. That is why we also meet the very
highest safety standards:
·Europe: EN 1888
·UK: BS EN 1888
·Canada: SOR/ 85 -379
·USA: ASTM F833
Should you have any questions or comments, please contact us at
https://mutsy.com/usen/contact
Maintenance and points for attention
The frame
·Regularly check the locking mechanism of the frame. After cleaning
you can spray some Teon spray on it and rub it with a soft cloth. This
also applies to other moving parts.
The wheels
·To let the wheels run more smoothly the wheel axles must regularly be
cleaned and lubricated with acid-free vaseline. The wheels can never
be lubricated with oil.
The fabrics
·Removable fabric parts can be hand-washed with a delicate detergent

6
(not warmer than 30°C). Do not use the washing machine or tumble
dryer for the cleaning.
·All Mutsy fabrics have been tested on water resistance however if the
stroller gets really wet, the water can penetrate the inner and outer
fabrics and leave circles behind. To prevent this we recommend you to
always use the rain covers in case of wet weather.
·You can treat stains on the outer fabric or lining with some liquid
bleach-free soap. Always treat the whole area.
·Always let a wet stroller dry with a fully unfolded hood.
·Even though Mutsy fabrics are selected with the utmost care and are
tested on colour fastness, the fabrics can discolour. Mutsy shall not be
liable for any possible discolouration.
Content of the box
·1 frame with basket
·1 seat
·2 front wheels
·2 rear wheels
Overview
Enumeration pertaining to the drawing
01. push bar
02. unlock buttons
03. push bar adjustment
04. frame attachment point
05. brake pedal
06. rear wheel
07. front wheel
08. swivel-lock
09. foot rest
10. back support
11. leg support
12. leg support adjustment
13. seat unlocking
14. bumper bar
15. 5-point safety harness
16. hood
17. unfold lock
Assembly
Assembly sequence
·Unlock and unfold the frame

7
EN
·Assemble the rear wheels
·Assemble the front wheels
·Place the pram body or seat
Orientation
·References in the text to the front, rear, left or right side of the stroller are
described from the perspective of a user walking behind the stroller.
The frame
Unfold the frame (a, b)
·Push the frame lock (17) inwards and move the top of the frame up-
wards until you hear a click.
·Push the buttons on both sides of the push bar and turn the push bar
upwards.
·The push bar has 4 dierent height positions. Release the buttons
when the push bar is in the desired position.
·Before use always check that the stroller has been unfolded and se-
cured correctly.
Fold the frame (d)
·Stand behind the frame and put the frame on the brake.
·Push the buttons on both sides of the push bar and turn the push bar
downwards until it has reached the lowest position.
·This position is indicated by means of a marking on the hinge point.
·Pull the unlock buttons on the inner side of the frame towards you and
then push the top part of the frame downwards.
·The unfold lock will automatically lock when folding.
·The frame is folded in an extra compact way if you rst lock the swivel-
ling wheels before you fold.
The wheels
Assemble the rear wheels (e)
·Push the button and slide the axle of the rear wheel in the rear wheel
housing until you hear a click. Pull the wheel to check that it has been
attached rmly.
Disassemble the rear wheels (f)
·Push the button on the outside of the rear wheel and pull the wheel
from the rear wheel housing.
Assemble the front wheels (g)
·Slide the axle of the front wheel upwards in the front wheel housing

8
until you hear a click. Pull the wheel to check that it has been attached
rmly.
Disassemble the front wheels (g)
·Push the button on the front side of the front wheel and pull the wheel
from the front wheel housing.
Steering
The swivelling wheels (h)
·Turn the ring above the front wheel on both sides inwards to lock the
swivelling wheels. The swivelling wheels will automatically be locked
when the wheels are placed in the driving direction.
·Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
The brake (i)
·A brake pedal is available in the centre of the rear axle. Push the pedal
downwards with your foot to block the brake. Push the pedal upwards
with your foot to unblock the brake.
The push bar (c)
·Push the buttons on both sides of the push bar and turn the push bar
upwards.
·The push bar has 4 dierent height positions. Release the buttons
when the push bar is in the desired position.
The pram body
·The pram body is suitable for transporting children from birth up to 33
lbs. (15 kg) and 30 inch (76 cm) in height, in a lying position.
·The pram body is not suitable for children who can sit or roll indepen-
dently or who can raise themselves on their hands and knees.
·This pram body can only be used on the frame and not as a stand-
alone cot.
·Regularly check the bottom and the borders of the pram body on wear
and tear.
·Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the pram body adapters (j)
·There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
·The adapter marked with‘R’ is placed on the right side of the frame, the

9
EN
adapter marked ‘L’ is placed on the left side.
·Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the pram body (k)
·Orientate the pram body such that it is directed rearwards on the frame.
·Hold the pram body by the handles on both sides and place directly
above the adapters.
·Slide the pram body over the adapters and press solidly until you hear
a click on both sides.
·Check that the pram body has been placed horizontally and has been
attached properly by trying to lift it from the frame.
Remove the pram body (l)
·Hold the pram body by the handles on both sides. Press and hold the
unlock buttons.
·Lift the pram body in vertical direction of the adapters.
Remove the pram body adapters (m)
·Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.
The hood (n)
·The hood can be unfolded by moving it upwards.
·Push and hold the buttons on both sides of the hood. The hood can
now be folded downwards.
The carry straps
·The carry straps must be clicked into the plastic components in order to
carry the pram body.
·Always ensure that the carry straps have been removed if a child is
placed in the pram body.
Assemble the rain cover on the pram body (o)
·Make sure that the hood of the pram body has been unfolded.
·Place the rain cover from top to bottom over the pram body and make sure
that the rain cover attaches well all around the bottom of the pram body.
The seat
·The seat is suitable for children from birth up to 55 lbs. (25 kg) and 42.7
inch (108 cm) in height. If your child is younger than 6 months always
use the pram body or the reclined carriage position of the seat.

10
·The seat can be folded and unfolded with the frame and does therefore
not need to be removed from the frame.
·The back support and leg support are adjustable.
·Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Assembly on the frame (p)
·There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
·Stand at the front side of the frame.
·Hold the seat on both sides at the unlock buttons above the attach-
ment points and push the chair downwards until you hear a click.
·Check that the seat has been attached solidly by trying to lift it from
the frame.
Assembly on the frame (the child faces the parent) (q)
·There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
·Stand at the front side of the frame.
·Hold the seat on both sides at the unlock buttons above the attach-
ment points and push the chair downwards until you hear a click.
·Check that the seat has been attached solidly by trying to lift it from
the frame.
Remove the seat
·Stand at the front side of the frame.
·Hold the seat on both sides at the unlock buttons and pull the buttons
upwards with your ngers. The seat can vertically be removed from the
attachment points.
Fold the frame with the seat directed forwards
·Stand behind the frame and make sure that the back support of the
seat is standing upright.
·Push the buttons on both sides of the push bar and turn the push bar
downwards until it has reached its lowest position.
·This position is indicated by means of a marking on the hinge point.
·Pull the unlock buttons on the inside of the frame towards you and
then push the top part of the frame downwards.
·Pull the button at the back of the seat upwards, hold this upwards and
tilt the back support of the seat backwards until it is fully at.
·Push the buttons on both sides of the leg support and push the leg
support fully downwards.

11
EN
Adjust the back support (r)
·Pull the button at the back of the seat upwards and hold it upwards.
·The back support has 4 positions. Place the back support in the desired
position and release the button to lock the position.
Adjust the leg support (s)
·Lift the leg support to place it upwards.
·Push the buttons on both sides of the leg support and push the leg
support downwards to lower it.
Reclined carriage position (t1,t2)
·The seat has a reclined carriage position to make the seat suitable for
children from birth.
·! The use of a suitable pram body is always recommended and preferred
for children from birth up to the age that your child can sit up unassisted.
·To put the seat in the reclined carriage position, put the leg rest in its
highest position and the backrest of the seat in its fully reclined posi-
tion. Release the two press studs on each side of the seat. (t1)
·Open the zipper around the leg support. There is a fabric side support
in the pocket behind the leg support, which you can pull out. Now you
can put the side support up and attach the press stud on each side
onto the plastic shell of the seat. The press studs of the seat cover can
now be attached to the press studs of the side support. (t2)
·! Make sure that the canopy is properly attached to the velcro at the top
of the backrest.
·Attach and remove bumper bar (u)
·Push the ends of the bumper bar in the thereto designated notches in
the seat until you hear a click.
·Press the unlock buttons on both sides of the bumper bar and remove
the bumper bar from the seat.
The integrated foot step (w)
·There is a zipper around the leg support of the seat. If so desired you
can open this zipper to thus create a higher foot rest for your child. The
child can then place the feet on the aluminium bar of the leg support.
When you child gets bigger you can again close the zipper and your
child can place the feet on the plastic foot rest of the frame.
The hood (v1, v2)
·Hold the front hood bar in the centre and move it forwards or rear-
wards to adjust the hood. (u1)
·Open the zipper in the centre to further enlarge the hood. Close the

12
zipper to again reduce the hood. (u2)
·Pull the ap on the front side of the hood outwards to additionally en-
large the hood. Push the ap inwards to again reduce the hood.
Assemble the rain cover on the seat (x)
·Make sure that the hood of the seat is in the upright position.
·Possibly open the zipper in the rain cover to adapt it to the enlarged
hood of the seat.
·Place the rain cover from top to bottom over the seat and make sure
that the rain cover is attached well behind the back support and over
the leg support.
The 5-point safety harness (y1,y2)
·Place your child in the seat and make sure that the legs of your child are
placed on each side of the leg piece.
·Make sure that the hip and shoulder belt is positioned correctly over
your child and place both plastic clamps in the central part of the har-
ness attached to the leg piece.
·To adjust the length of the shoulder straps, loosen the shoulder protec-
tors from the belt by undoing the snap buttons. This will reveal the belt
buckles. Adjust the length by sliding the buckles along both shoulder
straps until your child is comfortably secure. After adjusting, press
down both snap buttons to relock the shoulder protectors in place.
·The back support contains three positions for the shoulder belts. To ad-
just the position you remove both shoulder belts by moving the at-
tachment rings through the openings in the back of the seat. Move the
attachment rings through the desired openings so that the shoulder
belts are positioned properly.
·Regularly check the length and position of the belts and adjust, where
necessary.
The Maxi-Cosi car seat (option)
·The Maxi-Cosi car seat adapters are suitable for use with the Maxi Cosi
Mico: 5-22 lbs. 19-22 in. (2,2-10 kg, 48-74 cm) and Maxi Cosi Prezi: 4-30
lbs., <29 in. (1.8-13.6 kg, <74cm).
·Always observe the instructions in the manual of your Maxi-Cosi car
seat before you start using the car seat.
·Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the Maxi-Cosi adapters on the frame
·There are two foldable attachment points on both sides of the frame.

13
EN
Make sure that the attachment points are in a vertical position.
·The adapter marked with‘R’ is placed on the right side of the frame, the
adapter marked ‘L’ is placed on the left side.
·Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the Maxi-Cosi car seat on the adapters
·Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
·Hold the Maxi-Cosi car seat with the central hinge points of the support
bar directly above the adapters.
·Lower the Maxi-Cosi car seat and press solidly into the adapters until
you hear a click.
·Check that the Maxi-Cosi car seat has been placed horizontally and has
been attached properly by trying to lift it from the frame.
Remove the Maxi-Cosi car seat from the adapters
·Operate the unlocking system of the Maxi-Cosi car seat.
·Lift the Maxi-Cosi car seat straight up from the frame.
Remove the Maxi-Cosi adapters from the frame (z2)
·Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.

14
Table des matières
Introduction......................................................................................................... 14
Avertissements .................................................................................................... 14
Garantie............................................................................................................... 16
Entretien et points importants............................................................................. 17
Contenu du carton ............................................................................................... 18
Énumération concernantVue d’ensemble ............................................................ 18
Montage .............................................................................................................. 19
Orientation........................................................................................................... 19
Le châssis ............................................................................................................. 19
Les roues.............................................................................................................. 19
La direction.......................................................................................................... 20
Le frein................................................................................................................. 20
Le guidon ............................................................................................................ 20
La nacelle de promenade..................................................................................... 20
Le siège de poussette .......................................................................................... 22
Le siège auto Maxi-Cosi........................................................................................ 25
Introduction
·An de pouvoir utiliser ce produit de manière optimale, nous vous
conseillons de l’utiliser avec soin et de bien l’entretenir. Lisez ce mode
d’emploi attentivement avant d’utiliser la poussette, puis conservez-le
pour vous y rapporter ultérieurement.
·Si vous avez des questions, des remarques, des problèmes ou des réclama-
tions, prenez contact avec votre détaillant.
·Si vous souhaitez connaître les accessoires disponibles pour ce produit,
ou être informé des nouveaux produits Mutsy, visitez www.mutsy.com.
⚠AVERTISSEMENT
général
·AVERTISSEMENT : Lisez attentivement ce mode d’emploi, puis rangez-le dans un en-
droit sûr pour vous y rapporter ultérieurement. Le non-respect des consignes de ce
mode d’emploi peut avoir des conséquences graves pour la sécurité de votre enfant.
·AVERTISSEMENT : Vous êtes personnellement responsable de la sécurité de votre
enfant. Ne laissez jamais votre enfant sans surveillance.
·AVERTISSEMENT : Évitez les blessures graves dues aux chutes ou glissades. Utilisez
toujours le harnais de sécurité à cinq points.
·AVERTISSEMENT : Avant toute utilisation de la poussette, vériez le dépliage et le
verrouillage corrects et complets du châssis (y compris du guidon).
·AVERTISSEMENT : Avant toute utilisation, vériez que les dispositifs de xation du
landau, du siège ou du siège auto sont correctement bloqués.