Nautilus Hyosung MONiMAX7800I User manual

Installation Manual
MONiMAX7800I System
V01.00.02 (2017.05.22)
© 2017 Nautilus Hyosung Inc. All Rights Reserved.

© 2017 Nautilus Hyosung Inc. All Rights Reserved. I
Revision History
Installation Manual–MX7800I System
No.
Version
Date
Description of Change
Chapter
1
V01.00.00
2016/07/15
New Publication
All
2
V01.00.01
2016/12/01
Updated “System identification Label”
2
3
V01.00.02
2017/05/22
Updated CEN-1 installation cut sheet
3, 4
© 2017 Nautilus Hyosung All Rights Reserved.
The content of this specification is protected by copyright laws.
2017. 05. 22. 3rd Release

II © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Contents
Chapter1. Preface...........................................................................................................................1-1
Purpose.........................................................................................................................................................1-1
Audience.......................................................................................................................................................1-1
Support Information ......................................................................................................................................1-1
What is in This Manual..................................................................................................................................1-1
Terminologies................................................................................................................................................1-2
Abbreviations of ATM....................................................................................................................................1-2
Safety Precautions (English).........................................................................................................................1-4
Précautions pour la sécurité (French)...........................................................................................................1-6
Related Document ........................................................................................................................................1-8
Chapter2. Introduction...................................................................................................................2-1
About the MX7800I .......................................................................................................................................2-1
System Identification Label...........................................................................................................................2-2
Chapter3. Installation Information ................................................................................................3-1
Installation Condition and Space ..................................................................................................................3-1
Exterior..........................................................................................................................................................3-2
Access for Device .........................................................................................................................................3-4
Service Area..................................................................................................................................................3-5
Chapter4. System Installation .......................................................................................................4-1
Unpacking the ATM.......................................................................................................................................4-1
Installation Frame..........................................................................................................................................4-3
Notes.......................................................................................................................................Notes-1

Installation Manual Chapter1.Preface
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 1-1
Chapter1. Preface
Purpose
▶This manual is produced to provide the guidelines for installers to comply with while installing it.
▶This manual describes how to prepare for and to proceed the installation of ATM in advance.
Audience
▶This manual is for persons related to installing ATM in branches of banks, such as designers and
construction workers of the branches and ATM installers, to work efficiently and conveniently.
Support Information
▶If any question or installation error occurs while preparing for and installing ATM in compliance with
this manual, please contact maintenance staffs of Nautilus Hyosung. For the contact of
maintenance staffs of Nautilus Hyosung, see the E-mail addresses and telephone numbers
provided separately.
What is in This Manual
▶MONiMAX referred to as “MX”
▶This manual is designed to provide the installation guide for the ATM and the detailed description of
the following:
▪Important Warnings
▪Information for installation
▶All measurements in this manual are in inch scale with metric provided in braces [ ].
▶All information described in this manual is a licensed product of Nautilus Hyosung.
Some of the information in this manual may differ according to the network processor to be
connected and may be subsequently updated by the bank’s needs or the improvement by Nautilus
Hyosung.
It Is the policy of Nautilus Hyosung to improve products as new technology, components, software,
and firmware become available. Therefore Nautilus Hyosung reserves the right to change
specifications without notice.

Chapter1.Preface Installation Manual
1-2 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Terminologies
▶In this document the terminology listed below is used as follows:
▪Customer and consumer refer to any person who transacts business through the ATM.
▪Device and unit refer to the standard and optional ATM equipment, such as monitor, card reader,
printer and dispenser.
▪Fascia refers to the entire front portion of the unit, including the portion where the customer
transacts business.
▪Module refers to a plug-in device that can be serviced or replaced.
▪Note(s) and bill(s) refer to the individual documents loaded into and dispensed from the dispenser.
▪Servicing and maintenance refer to the supervisor, operator and technician’s tasks performed to
keep the ATM operational.
▪Screen refers to the text appearing on the customer display.
Abbreviations of ATM
▶In this document the abbreviations listed below is used as follows:
#
Abbreviations
Description
1
AD board
Analog to Digital conversion board
2
ADA
The American Disabilities Act
3
ALG
Alignment Module
4
AP
Application Program
5
Assy
Assembly
6
BATT S/W
Battery Switch
7
BC
Bill Checker
8
BM1
Body Module1
9
BM2
Body Module2
10
BM3
Body Module3
11
BUNDLE
Bulk Note Separation Module
12
CAM
Camera Unit
13
CASSETTE
Cash & Check Cassette
14
CCIM
Cash & Check In Module
15
CCR
Contactless Card Reader
16
CDU
Cash Dispenser Unit
17
CE
Control Electronics
18
Earphone Jack
Voice Converter for Visually Disabled Persons (ADA)
19
EMV
Europay, Mastercard, Visa

Installation Manual Chapter1.Preface
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 1-3
#
Abbreviations
Description
20
EP
Elementary Program
21
EPP
Encryption PIN Pad
22
Escrow
Escrow Module
23
FELT
Ink Head Cleaner Felt
24
H/W
Hardware
25
I/F
Interface
26
ISO
International Standard Organization
27
JPR
Journal Printer
28
LCD
Liquid Crystal Display
29
MCU
Magnetic Card Unit
30
OPL
Operation Panel for Customers to Operate
31
OSD board
On Screen Display Board
32
P/S
Power Supply
33
PIN
Personal Identification Number
34
PNC
Panel Control Board
35
PRT
Endorsement Module
36
PTR
Printer (mainly Receipt Printer)
37
RECOG
Recognition Module
38
REJECT
Reject Module
39
RT/A6
Retract & A6 Cassette
40
S/W
Switch
41
SCM
Separator Control Module
42
SIU
Sensor and Indications Unit
43
SP
Service Provider
44
SPR
Slip Printer (Receipt Printer)
45
TTU
Text Terminal Unit (OPL or SPL)
46
VFD
Vacuum Fluorescent Display

Chapter1.Preface Installation Manual
1-4 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Safety Precautions (English)
▶Common Safety Precaution
Precautions outlined this manual provide information on safe and proper
handling of the product. Non-compliance of the precautions may result in
injury or damage to the product.
This precaution symbol with sample term tells you safety warnings during
equipment handlings.
▶Please read the following instructions before operating equipment.
▪Operate equipment in the order outlined in this manual.
▪Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the product.
▪Avoid operations not addressed in this manual.
▪If you cannot remedy system problems using the methods outlined in this manual, please refer to
contact information listed in the manual.
▪Any change or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
▶Description of Precaution Symbols
Symbol
Description
Electrical Shock Warning
▪Do not remove cover. Only a maintenance engineer is allowed to
open the cover.
▪Do not touch. You may receive electric shock.
▪Make sure to turn off the power when servicing the equipment.
High Temperature Warning
▪Do not touch the equipment when it is running.
▪The equipment can get extremely hot and may cause a burn.
▪Make sure to close the cover before running the equipment.

Installation Manual Chapter1.Preface
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 1-5
Use Precaution when Moving
▪The equipment is heavy. Make sure at least 2 people lift or move
the equipment.
▪Do not attempt to move the equipment alone. You may be injured
from dropping the heavy equipment.
Fire Hazard
▪Place the equipment in an area away from any combustible
materials.
▪The equipment may catch on fire from overheating or short circuit
of the power supply unit.
Disassembly Warnings
▪Do not disassemble or modify the equipment unless you are a
certified engineer.
▪Contact the service center for maintenance, adjustments and
repairs.
▪Improper disassembly may cause fire or electrical shock.
Collapse Precautions
▪Do not place the equipment where the floor cannot sustain the
weight of the equipment, or on slanted or unstable surface.
▪Equipment may fall and cause injury or damage.
Unplug the Equipment
▪Stop using the equipment immediately if it smokes, emits an
unusual smell, makes abnormal sounds, or if liquids or other
foreign materials enter the equipment.
▪If the above-mentioned abnormalities occur, immediately turn off
the power, unplug the equipment and contact the service center.
▪If you ignore these symptoms, the equipment may catch on fire or
cause electric shock.
<CAUTION>
1. TO REDUCE THE RISK OF FIRE, USE ONLY No. 26 AWG OR LARGER
TELECOMMUNICATION LINE CORD.
2. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSED OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3. FOR PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED
NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
4. THE EQUIPMENT IS TO BE SECURED TO THE BUILDING STRUCTURE BEFORE
OPERATION.

Chapter1.Preface Installation Manual
1-6 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Précautions pour la sécurité (French)
►Précaution générale pour la sécurité
Précautions décrits de ce manuel fournissent des informations sur une
manipulation sûre et appropriée du produit. Le non-respect des précautions
peut causer des blessures ou endommager le produit.
Ce symbole de précaution avec le terme d’example vous indique des
consignes de sécurité lors de la manipulation de l'équipement.
►Veuillez lire des instructions suivantes avant d'utiliser l'équipement
▪Fonctionner l'équipement dans l'ordre indiqué dans ce manuel.
▪Suivre les précautions indiquées dans ce manuel, ainsi que l'équipement lui-même.
Le défaut de traiter correctement de ces précautions peut entraîner des blessures ou endommager le
produit.
▪Évitez des opérations non traitées dans ce manuel.
▪Si vous ne pouvez pas résoudre des problèmes du système en utilisant des méthodes décrites dans
ce manuel, veuillez se référer aux informations de contact figurant dans le manuel, s’il vous plaît.
▪Certain changement ou des modifications dans la construction de ce dispositif qui ne sont pas
expressément approuvés par la partie responsable de la conformité pourraient annuler l'autorité de
l'utilisateur de faire fonctionner l'équipement.
<REMAQUE!>
Cet équipement a été testé et fondé pour se conformer aux limites pour un équipement numérique de
classe A, conformément à la partie 15 des règles FCC. Ces limites sont conçues pour fournir une
protection raisonnable contre des interférences nuisibles lorsque l'équipement est utilisé dans un
environnement commercial. Cet équipement génère, utilise et peut émettre des fréquences radios et,
s'il n'est pas installé et utilisé conformément aux instructions de ce manuel, peut causer des
interférences nuisibles aux communications radios.
Le fonctionnement de cet équipement dans une zone résidentielle est susceptible de provoquer des
interférences nuisibles dans le cas, l'utilisateur devra corriger ces interférences à ses propres frais.
►Description des symboles de précaution
Symbole
Description
Choc électrique
• Ne pas retirer le couvercle. Seul le technicien d'entretien est
autorisé à ouvrir
le couvercle.
• Ne pas toucher. Vous pouvez avoir un choc électrique.
• Assurez-vous d'éteindre l'appareil lors de l'entretien de
l'équipement.
À haute temperature
• Ne pas toucher l’équipement quand il est en marche.
• L’équipement peut devenir extrêmement chaud et peut provoquer
une brûlure.
• Assurez-vous de fermer le couvercle avant de lancer
l'équipement.

Installation Manual Chapter1.Preface
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 1-7
Soyez prudent lors du déplacement
• L'équipement est lourd. Assurez-vous d'au moins 2 personnes
pour soulever ou déplacer l'équipement
• N'essayez pas de déplacer l’équipement seul. Vous pouvez être
blessés par la chute de l'équipement lourd.
Risque d'incendie
• Placer l’équipement dans une zone éloignée de tous les matériaux
combustibles.
• L'équipement peut s'enflammer de surchauffe ou de court-circuit
de l'unité d'alimentation.
Démontage
• Ne pas démonter ou de modifier l'équipement, sauf si vous êtes
ingénieur certifié.
• Contacter le centre de service pour l'entretien, le réglage et
la réparation.
• Le mauvais démontage peut provoquer un incendie ou un
choc électrique.
Tomber
• Ne pas placer l'équipement dont le sol ne peut pas supporter le
poids de l'équipement, ou sur une surface inclinée ou instable.
• L'équipement peut tomber et provoquer des blessures ou
des dommages.
Débrancher l'équipement
• Cessez d'utiliser l’équipement immédiatement si il fume, émet une
odeur inhabituelle, fait des bruits anormaux ou si des liquides ou
d'autres matériaux étrangers dans l'équipement.
• Si les anomalies mentionnées ci-dessus se produisent, éteignez
immédiatement la puissance, débranchez l'appareil et contactez
le centre de service.
• Si vous ignorez ces symptômes, l’équipement peut prendre feu ou
provoquer un choc électrique.
AVERTISSEMENT :
1. POUR RÉDUIRE LES RISQUES D'INCENDIE, UTILISEZ UNIQUEMENT AWG n °26
OU LA LIGNES DE TELECOMMUNICATION PLUS GROSSE.
2. RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN TYPE
INCORRECT. DISPOSER POUR UTILISATION DES BATTRIES SELON LES
INSTRUCTIONS.
3. POUR LES APPAREILS RACCORDES, LA PRISE DOIT ETRE INSTALLEE PRES
D’EQUIPEMENT POUR ÊTRE FACILEMENT ACCESSIBLE.
4. L’EQUIPEMENT DOIT ETRE SECURISE A LA STRUCTURE DU BATIMENT AVANT
D'UTILISER.

Chapter1.Preface Installation Manual
1-8 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Related Document
▶The related documents are listed as follows. If needed, please contact staffs of our technical
support team and maintenance team.
▪Operator Manual
▪Service Manual
▪VDM Manual (Diagnostic)
▶For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and
telephone numbers provided separately.

Installation Manual Chapter2.Introduction
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 2-1
Chapter2. Introduction
About the MX7800I
►The MX7800I is a full service ATM. Consumers deposit the cash/check in one slot with mixing, make
the withdrawal and receive the transaction records through openings in the fascia with MX7800I
ATM.
The MONiMAX7800I ATM is installed on a new or existing concrete island. The terminal is weather-
sealed to allow for exposure to the weather.
The MX7800I is a versatile, easily maintained delivery system that can be modified to keep pace
with the bank's changing needs.
►The benefits that the new concept MX7800I provides are as follows.
1.Removes inconvenience which occurs when bank clerks directly handle cash and checks with
customers and relieves workload upon tellers by processing deposit/ withdrawal of cash/check
automatically.
2.Relieves risks and burden of directly handling cash/check by directly keeping cash/ check
deposited in a safe.
3.Allows tellers to calculate and close amount on hand faster than the existing manual calculation.
4.Abank customer and a teller can easily interact on a touch screen, just like talking, through
Nautilus Hyosung’s intuitive and easy UI.
5.Supports expanded options such as coin dispense RF (NFC), and barcode, as well as basic
functions of deposit/withdrawal of cash/check.
6.Allows easy and quick installation and maintenance.

Chapter2.Introduction Installation Manual
2-2 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
System Identification Label
▶The System Label below shows the layout of the product identification label which is fixed inside the
ATM.

Installation Manual Chapter3. Installation Information
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 3-1
Chapter3. Installation Information
Installation Condition and Space
►When you determine the location of your ATM, ensure that the physical environment including the
temperature and humidity, meets the requirements. Following conditions should be met before
installing equipment.
1. Avoid locations where intense direct sunlight is reflected off the LCD screen.
2. Avoid locations where strong static electricity can occur.
3. The ATM should be mounted on concrete or other nonflammable surface only.
4. The floor must allow easy wheelchair access from the front or the side.
5. Space required for servicing the machine should be considered before installation.

Chapter3. Installation Information Installation Manual
3-2 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Exterior
►Front Elevation
►Side Elevation

Installation Manual Chapter3. Installation Information
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 3-3
►Plan View
Weight: 2,420.7lbs (1,098Kg)
►ISO View

Chapter3. Installation Information Installation Manual
3-4 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
Access for Device
Device
Height
(from base of ATM)
Depth
(from front of bezel)
Distance from
No.5 Key
<3D Distance>
Clock Face
Position
(Relative to No.5
Key)
A
RECEIPT
45.2 inch
[1146.9mm]
1.3 inch
[32.1mm]
12.2 inch
[309.3mm]
2
B
Earphone
Jack
39.4 inch
[1001.0mm]
1.4 inch
[35.4mm]
14.9 inch
[379.2mm]
3
C
Card
39.9 inch
[1014.6mm]
1.8 inch
[45.5mm]
6.8 inch
[173.6mm]
3
D
Cash/Check
34.5 inch
[876.7mm]
1.4 inch
[34.3mm]
13.7 inch
[347.5mm]
4
E
EPP
(No.5 Key)
40.8 inch
[1037.3mm]
1.5 inch
[38.7mm]
0
0
F
Cash Out
34.4 inch
[874.2mm]
2.1 inch
[53.9mm]
8.1 inch
[205.6mm]
7
G
Barcode
40.1 inch
[1019.5mm]
1.5 inch
[38.9mm]
5.1 inch
[129.2mm]
9
H
Touch
Screen
55.6 inch
[1412.5mm]
2.1 inch
[52.7mm]
15.1 inch
[383.5mm]
12
I
RF
34.6 inch
[877.6mm]
1.2 inch
[30.5mm]
7.1 inch
[179.8mm]
5

Installation Manual Chapter3. Installation Information
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 3-5
Service Area
►Side Elevation
►Minimum Installation

Chapter3. Installation Information Installation Manual
3-6 © 2017 Nautilus Hyosung Inc. All Rights Reserved.
►Recommended Installation
<Note!>
Nautilus Hyosung recommends it is more convenient for your service personnel to have enough
maintenance space to service this ATM machine.

Installation Manual Chapter4. System Installation
© 2017 Nautilus Hyosung Inc. All Rights Reserved. 4-1
Chapter4. System Installation
Unpacking the ATM
▶Unpack the machine on top of the palette.
1. Cut the straps that are fastened around the box with a knife.
(Be careful when cutting the straps. Refer to figure below.)
2. Use an appropriate tool to remove the nails from the palette. (Refer to figure below)
3. Remove the lid, then box from the top. Do not discard the packaging materials until you have
verified any shipping damage claim. Contact your distributor immediately if you see any
shipping damage. Store the box in a safe place to re-use or discard of appropriately.
4. Verify the contents carefully with the packing list to be sure all items listed are included. Notify
your distributor of any shortages.
5. If only the palette needs to be removed, lift the whole machine from the bottom and set it aside.