Nautilus Hyosung MX5300 Parts list manual

© 2009 Nautilus Hyosung Inc. All Rights Reserved. I
Operator Function
MX5300 System
V01.00.03 (2014.6.24)

II © 2009 Nautilus Hyosung Inc. All Rights Reserved.
Revision History
Operator Function –MX5300 System
No.
Ver.
Date
Description of Change
Chapter
1
V1.0
2009/4
New Publication
All
2
V1.1
2010/3
Modified the incorrect words
3
V01.00.02
2013/1/28
Changed the manual format
4
V01.00.03
2014/6/24
Updated all chapters by Model Name of ATM changed
All
© 2009 Nautilus Hyosung All Rights Reserved.
The contents of this document could be changed as the document revises.
2014.6.24 4th Release

© 2009 Nautilus Hyosung Inc. All Rights Reserved. III
Contents
Operator Function................................................................................................................................................... 1
Password For Entering Supervisor Mode ....................................................................................................... 1
Supervisor Menu ............................................................................................................................................. 3
Replenish................................................................................................................................................... 5
Total............................................................................................................................................................ 6
Add Cash ................................................................................................................................................... 7
Print Cash .................................................................................................................................................. 7
Configure.................................................................................................................................................... 8
Host Setup ................................................................................................................................................. 9
Transaction Setup.................................................................................................................................... 21
Customer Setup....................................................................................................................................... 24
System Setup........................................................................................................................................... 49
Journal ..................................................................................................................................................... 62
Print By Date............................................................................................................................................ 63
Print By Index........................................................................................................................................... 64
View.......................................................................................................................................................... 65
Print Last X............................................................................................................................................... 66
Print Journal............................................................................................................................................. 66
Diagnostics.................................................................................................................................................... 67
Report ...................................................................................................................................................... 67
Error Code................................................................................................................................................ 68
Error Sum................................................................................................................................................. 70
SW Version .............................................................................................................................................. 71
RCOPY.......................................................................................................................................................... 72
Journal RCOPY........................................................................................................................................ 72
SW Installation......................................................................................................................................... 73
Log Rcopy................................................................................................................................................ 74
Appendix A. Operator Function with NDC ..............................................................................................Appendix-1
Overall Function Map ......................................................................................................................Appendix-1
OP function step.........................................................................................................................Appendix-1
Main Screen ....................................................................................................................................Appendix-3
Supervisor Mode .............................................................................................................................Appendix-4
Configure....................................................................................................................................Appendix-4
Version INFO............................................................................................................................Appendix-18
Host Network............................................................................................................................Appendix-19
ATM Network............................................................................................................................Appendix-22
Reboot......................................................................................................................................Appendix-31
Change Password....................................................................................................................Appendix-31
Operator Mode ..............................................................................................................................Appendix-32
Replenish.................................................................................................................................Appendix-32
EJ Back Up ..............................................................................................................................Appendix-39
LOG BACK UP.........................................................................................................................Appendix-42
VIEW ERROR CODE ..............................................................................................................Appendix-43
Technician Mode............................................................................................................................Appendix-45
Appendix B. Demonstration Screen .....................................................................................................Appendix-46
Demo Transaction Process ...........................................................................................................Appendix-46
AP Main....................................................................................................................................Appendix-46
Select Language......................................................................................................................Appendix-47
Input Password ........................................................................................................................Appendix-47
Select Transaction ...................................................................................................................Appendix-48

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 1
Operator Function
Password For Entering Supervisor Mode
►All MoniMax machines use Operator Function. But the way to enter Supervisor mode is
different depending on the Supervisor device type.)
If using front screen, you should press the ENTER, CLEAR, CANCEL 1,2 and 3 keys in
order.
In case of using T-SPL, to enter Supervisor mode, input 66 option on T-SPL after
changing convert switch located on the rear of ATM from IN SERVICE to
SUPERVISOR status, as shown in below picture,
Lastly, if using H-SPL, to enter Supervisor mode, just input 66 option on H-SPL.
Please press entry key (“ENTER, CLEAR, CANCEL, 1, 2and 3” or “66”) on pinpad or
SPL device so that you can see password screen to input password.
The default password is “555555”(6 digits). The default password is changeaible in
Supervisor mode. After inputting correct exact password of 4~6 digit, press CONFRIM
key in order to enter Supervisor main menu. Pressing CLEAR key erases the input
number and pressing CANCEL key goes to Application mode.
Depending on authority, there are three kinds of default password like below table.
Authority
Default Password
OPERATOR
111111 (6 digits)
SERVICE
222222 (6 digits)
MASTER
555555 (6 digits)

Operator Function
2© 2009 Nautilus Hyosung Inc. All Rights Reserved.
- Touch Machine
- No Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 3
Supervisor Menu
►The following screen below is the main screen of Supervisor mode.
Supervisor mode in this machine is largely composed of ATM Status and Function.
A. ATM Status
1) Machine name
2) Supervisor mode
3) Door Status(CLOSE or OPEN)
4) Connection type for connect to host (Dial or TCPIP)
5) ATM status(NORMAL or ERROR)
6) Error code
7) 1st Cassette : Remained notes(Denomination)
e.g) if 1000 notes of $20, 1000(20)
8) 2nd Cassette : Remained notes(Denomination)
9) 3rd Cassette : Remained notes(Denomination)
10) 4th Cassette : Remained notes(Denomination)
11) Cash dispenser status
12) Card reader status
13) Receipt printer status
14) Journal printer status
15) The media status of 1st cassette
16) The media status of 2nd Cassette
17) The media status of 3rd Cassette
18) The media status of 4th Cassette
19) reject box status(rejected count)
20) Retracted card Count (Only for Motor driven Card Reader)
21) The media status of Receipt Printer
22) The media status of Journal Printer
23) Terminal ID
24) Routing ID
25) Program version
26) Current Date and Time
B. Functions
04) REPLENISH
05) CONFIGURE
06) JOURNAL
07) DIAGNOSTICS
08) REPORT
09) RCOPY
23) REBOOT
24) SHUT-DOWN
33) RESET ALL
44) RESET
99) IN SREVICE

Operator Function
4© 2009 Nautilus Hyosung Inc. All Rights Reserved.
In order to move to the in-service mode, select “IN SERVICE” menu.(In case of using
T-SPL, changing convert switch located on the rear of ATM from SUPERVISOR to IN
SERVICE status)
- Touch Machine
- No Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 5
Replenish
►This menu contains TOTAL, ADD CASH, and PRINT CASH . Please press each button
on this menu to go to next screen. To go back to the previous screen, just press the
CANCEL key in pinpad.
- Touch Machine
- No Touch Machine

Operator Function
6© 2009 Nautilus Hyosung Inc. All Rights Reserved.
Total
►This menu contains DAY TOTAL, TRIAL DAY TOTAL, CASSETTE TOTAL and TRIAL
CASSETTE TOTAL. You can operate the related function by pressing each button on
this menu. To go back to the previous screen, just press the CANCEL key in pinpad.
1) DAY TOTAL : Do settlement with host. After settlement, clear transaction
information.
2) TRIAL DAY TOTAL : Just do settlement with host.( Not clear transaction info.)
3) CASSETTE TOTAL : Show note count and then clear note count.
4) TRIAL CASSETTE TOTAL : Just show note count.( Not clear note count)
- Touch Machine
- No Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 7
Add Cash
►By pressing button on this menu, you can select cassette to add note count. (Cassette
numbers are designated from top to bottom). Enter the note count you want to add.
The each note count you enter must not exceed the maximum note count. (Max.
count : 2,000/CST)
- Touch Machine
- No Touch Machine
After entering each note count, press CONFIRM to execute the inputted counts to the
machine.
Print Cash
►Please press this menu to print cassette information.

Operator Function
8© 2009 Nautilus Hyosung Inc. All Rights Reserved.
Configure
►This menu contains HOST SETUP, TRANSACTION SETUP, CUSTOMER SETUP and
SYSTEM SETUP. Please press each button on this menu to go to the next screen. To
go back to the previous screen, just press the CANCEL key in pinpad.
- Touch Machine
- No Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 9
Host Setup
►This host setup menu contains TELEPHONE NUMBER(or HOST IP SETUP), HEALTH
CHECK MESSAGE, REMOTE MONITOR, TERMINAL NUMBER, ROUTING ID,
SERIAL NUMBER and TRIAL DAY TOTAL. Please press each button on this menu to
go to the next screen. To go back to the previous screen, just press the CANCEL key
in pinpad.
Display of HOST SETUP menu for supporting Dialup ☞
- Touch Machine
- No Touch Machine

Operator Function
10 © 2009 Nautilus Hyosung Inc. All Rights Reserved.
Display of HOST SETUP menu for supporting TCPIP ☞
- Touch Machine
- No Touch Machine
1. Telephone Number
This menu is to set up telephone number if host uses dialup.
If you press each button on this menu, phone number of host can be input. You can
input number and “,” character up to 1~20 digits by using '<' or '>'.
This function is used to enter the primary phone number and the back-up phone
number of the host. When dialing to host is failure (busy, no answer or etc), ATM
switches to other phone number automatically. For more accurate and safer
connection, it would be better to get 2 other phone numbers from a host company
and input them.

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 11
- Touch Machine
- No Touch Machine
2. HOST IP Setup
This menu is to set up IP(or URL) and port of Host when using TCPIP and transfer
to Host2 Name automatically in case of connection error.
- Touch Machine

Operator Function
12 © 2009 Nautilus Hyosung Inc. All Rights Reserved.
- No Touch Machine
1) USE URL function is to set up Host address by IP or URL. If this value is
“ENABLE”, use URL as Host address. Otherwise, use IP as Host address. The
default option is “DISABLE”.
2) SSL STATUS function is to set up whether to use SSL or not during TCPIP
communication. The default option is “DISABLE”.
3) HOST1 NAME function is to set up first host address. If “USE URL” is
“ENABLE”, input URL of Host. Up to a maximum of 50 characters. Otherwise,
input IP of Host. Input 15 characters such as XXX.XXX.XXX.XXX(refer to above
screen for details)
4) HOST1 PORT function is to set up first host port. Being able to input 0 ~ 65536.
5) HOST2 NAME function is to set up second host address. If “USE URL” is
“ENABLE”, input URL of Host. Up to a maximum of 50 characters. Otherwise,
input IP of Host. Input 15 chrarcters such as XXX.XXX.XXX.XXX.(Refer to display
for the details)
6) HOST2 PORT functions is to set up second host port. Being able to input 0 ~
65536.

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 13
3. Health Check Message
If you press HOST SEND button, either "ENABLE" or "DISABLE" can be selected.
ATM sends its status periodically to the host when “HOST SEND” is set up to
“ENABLE”. The interval is dependent on “MESSAGE SEND INTERVAL”.
If you press MESSAGE SEND INTERVAL button, the value of SEND INTERVAL
can be adjusted. (0 ~ 24). This value is saved by pressing CONFIRM button.
- Touch Machine
- No Touch Machine

Operator Function
14 © 2009 Nautilus Hyosung Inc. All Rights Reserved.
4. Remote Monitor
Remote Monitor Screen to support Dialup ☞
- Touch Machine
- No Touch Machine
Remote Monitor Screen to support TCPIP ☞
- Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 15
- No Touch Machine
1) RMS EN/DISABLE function is to set up whether to connect to the RMS. The
default option is “ENALBE”.
2) RMS STATUS SEND EN/DISABLE function is used to send status message to
RMS in enable or in disable. The default option is “DISABLE”
3) The REMOTE PHONE function is used to input the RMS primary phone number
and the back-up phone number.
If you press each button on this menu, phone number of RMS will be input. You
can input number and “,” character up to 1~20 digits by using '<' or'>'. When
dialing to RMS is failure (busy, no answer or etc), ATM switches to other phone
number automatically.
- Touch Machine

Operator Function
16 © 2009 Nautilus Hyosung Inc. All Rights Reserved.
- No Touch Machine
4) RMS IP SETUP function is to set up information of host to connect with RMS. If
you press each button on this menu, you can set up various information.
- Touch Machine
- No Touch Machine

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 17
Below items are to set up to communicate with RMS when supporting TCPIP
- USE URL function is to set up RMS address as IP or URL. If setting value is
“ENABLE”, use URL as RMS address. Otherwise, use IP as RMS address.
- RMS CONNECTION TYPE function is to set up whether to connect from ATM to
RMS, or from RMS to ATM. If setting value is “ACTIVE”, connect from ATM to
RMS. Otherwise, connect from RMS to ATM.
- NAME function is to set up RMS address. If “USE URL” is “ENBLE”, input URL of
RMS. Up to a maximum of 50 characters. Otherwise, input IP of RMS. Input 15
characters such as XXX.XXX.XXX.XXX.(Refer to display for the details)
- RMS SEND INTERVAL function is to set up the time to send the status of the
ATM to the RMS periodically. Setting up the hours as the unit and setting up 4
hours as default. Be able to input 1~24.
- ATM LISTENING PORT function is to set up required port number when
connecting from RMS to ATM. Setting up “5555” as default.
- RMS LISTENING PORT function is to set up required port number when
connecting from ATM to RMS. Setting up “9999” as default.
5) The PASSWORD function is used to set the RMS password to connect to ATM
from RMS.
6) RMS CALL BACK OPTION function provides a function for only permitted ATM
to connect to RMS. The CALL BACK EN/DISABLE function is to set up whether
to use RMS CAL BACK function. If setting value is “ENABLE”, ATM makes a call
to RMS using phone number saved on ATM when making a call to ATM by
RMS and put down the call .
The RETRY COUNT function is to set up the number of times to attempt
“CALL BACK”
- Touch Machine