Nautilus Hyosung MONiMAX8200QTN User manual

Installation Manual
MONiMAX8200QTN System
V01.00.00 (2017.09.26)
© Nautilus Hyosung Inc. All Rights Reserved.

© Nautilus Hyosung, Inc. All Rights Reserved. I
Revision History
Installation Manual –MX8200QTN System
No.
Version
Date
Description of Change
Chapter
1
V01.00.00
2017/09/26
New Publication
All
© Nautilus Hyosung Inc. All Rights Reserved.
The content of this specification is protected by copyright laws.
2017. 09. 26 1st Release

© Nautilus Hyosung, Inc. All Rights Reserved. II
Contents
Chapter1. Preface...........................................................................................................................1-1
Purpose ........................................................................................................................................................1-1
Audience.......................................................................................................................................................1-1
Support Information......................................................................................................................................1-1
What is in This Manual.................................................................................................................................1-1
Terminologies ...............................................................................................................................................1-2
Abbreviations of ATM....................................................................................................................................1-2
Safety Precautions .......................................................................................................................................1-4
Related Document........................................................................................................................................1-6
Chapter2. Introduction ...................................................................................................................2-1
About the MX8200QTN................................................................................................................................2-1
System Identification Label ..........................................................................................................................2-2
Chapter3. Installation Information.................................................................................................3-1
Installation Condition and Space..................................................................................................................3-1
Exterior .........................................................................................................................................................3-2
Access For Device........................................................................................................................................3-6
Service Area .................................................................................................................................................3-7
Chapter4. System Installation........................................................................................................4-1
Unpacking the ATM ......................................................................................................................................4-1
Installation Frame.........................................................................................................................................4-2
Power Requirements....................................................................................................................................4-5
Ethemer Standard Cable..............................................................................................................................4-5
Notes .......................................................................................................................................Notes-1

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-1
Chapter1. Preface
Purpose
►This manual is produced to provide the guidelines for installers to comply with while
installing it.
►This manual describes how to prepare for and to proceed the installation of MX8200QTN in
advance.
Audience
►This manual is for persons related to installing MX8200QTN in branches of banks, such as
designers and construction workers of the branches and ATM installers, to work efficiently
and conveniently.
Support Information
►If any question or installation error occurs while preparing for and installing MX8200QTN in
compliance with this manual, please contact maintenance staffs of Nautilus Hyosung. For
the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and
telephone numbers provided separately.
What is in This Manual
►MONiMAX referred to as “MX”
►This manual is designed to provide the installation guide for the MX8200QTN and the
detailed description of the following:
▪Important Warnings
▪Information for installation
►All measurements in this manual are in inch scale with metric provided in braces
[ ].
►All information described in this manual is a licensed product of Nautilus
Hyosung.
Some of the information in this manual may differ according to the network processor
to be connected and may be subsequently updated by the bank’s needs or the
improvement by Nautilus Hyosung .
It is the policy of Nautilus Hyosung Inc. to improve products as new technology,

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-2
components, software, and firmware become available. Therefore Nautilus Hyosung
reserves the right to change specifications without notice.
Terminologies
►In this document the terminology listed below is used as follows:
▪Customer and consumer refer to any person who transacts business through the ATM.
▪Device and unit refer to the standard and optional ATM equipment, such as monitor,
card reader, printer and dispenser.
▪Fascia refers to the entire front portion of the unit, including the portion where the
customer transacts business.
▪Module refers to a plug-in device that can be serviced or replaced.
▪Note(s) and bill(s) refer to the individual documents loaded into and dispensed from the
dispenser.
▪Servicing and maintenance refer to the supervisor, operator and technician’s tasks
performed to keep the ATM operational.
▪Screen refers to the text appearing on the customer display.
Abbreviations of ATM
►In the manual the abbreviations listed below is used as follows:
#
Abbreviations
Description
1
AD board
Analog Digital Board
2
ADA
The American Disabilities Act
3
AP
Application Program
4
Assy
Assembly
5
BRM
Bill Recycling Machine (Bill Recycler)
5-1
BC
Bill Checker
5-2
BMD
Body Module-Down (Lower Body of the Machine)
5-3
BMU
Body Module-Up (Upper Body of the Machine)
5-4
CSM
Customer Service Module
5-5
DPC
Deposit Cassette
5-6
RC
Recycle Cassette
5-7
RJC
Reject Cassette
5-8
TE
Tape Escrow
5-9
UTC
Utility Cassette
6
BATT S/W
Battery Switch
7
CAM
Camera Unit

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-3
#
Abbreviations
Description
8
CE
Control Electronics
9
CSM50
Check Deposit Module
10
Earphone Jack
Voice Converter for Visually Disabled Persons (ADA)
11
EMV
Europay, Mastercard, Visa
12
EP
Elementary Program
13
EPP
Encryption PIN Pad
14
H/W
Hardware
15
I/F
Interface
16
ISO
International Standard Organization
17
JPR
Journal Printer
18
LCD
Liquid Crystal Display
19
MCU
Magnetic Card Unit
20
OPL
Operation Panel for Customers to Operate
21
OSD board
On Screen Display Board
22
P/S
Power Supply
23
PIN
Encryption PIN Pad
24
PNC
Panel Control Board
25
PTR
Printer (mainly Receipt Printer)
26
S/W
Switch
27
SIU
Sensor and Indications Unit
28
SP
Service Provider
29
SPR
Slip Printer (Receipt Printer)
30
TTU
Text Terminal Unit (OPL or SPL)

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-4
Safety Precautions
►Common Safety Precaution
▪Safety Precautions in outlined this manual provide information on safe and proper
handling of the product. Non-compliance of the safety precautions may result in injury or
damage to the product.
▪This precaution symbol with sample term tells you safety warnings during equipment
handlings.
►Please read the following instructions before operating equipment.
▪Operate equipment in the order outlined in this manual.
▪Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the product.
▪Avoid operations not addressed in this manual.
▪If you cannot remedy system problems using the methods outlined in this manual, please
refer to contact information listed in the manual.
▪Any change or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
<Caution !>
1. To reduce the risk of fire, use only No. 26 AWG OR LARGER Telecommunication cord
2. Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to the instructions.
3. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
4. The equipment is to be secured to the building structure before operation
5. A security container shall be permitted to optionally be provided with a secondary lock, but
improper use of the secondary lock feature will reduce the security level of the ATM.

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-5
►Description of Precaution Symbols
#
Symbol
Description
1
Electrical Shock Warning
▪Do not remove cover. Only a maintenance engineer is allowed
to open the cover.
▪Do not touch. You may receive electric shock.
▪Make sure to turn off the power when servicing the equipment.
2
High Temperature Warning
▪Do not touch the equipment when it is running.
▪The equipment can get extremely hot and may cause a burn.
▪Make sure to close the cover before running the equipment.
3
Use Precaution when Moving
▪The equipment is heavy. Make sure at least 2 people lift or
move the equipment.
▪Do not attempt to move the equipment alone. You may be
injured from dropping the heavy equipment.
4
Fire Hazard
▪Place the equipment in an area away from any combustible
materials.
▪The equipment may catch on fire from overheating or short
circuit of the power supply unit.
5
Disassembly Warnings
▪Do not disassemble or modify the equipment unless you are a
certified engineer.
▪Contact the service center for maintenance, adjustments and
repairs.
▪Improper disassembly may cause fire or electrical shock.
6
Collapse Precautions
▪Do not place the equipment where the floor cannot sustain the
weight of the equipment, or on slanted or unstable surface.
▪Equipment may fall and cause injury or damage.
7
Unplug the Equipment
▪Stop using the equipment immediately if it smokes, emits an
unusual smell, makes abnormal sounds, or if liquids or other
foreign materials enter the equipment.
▪If the above-mentioned abnormalities occur, immediately turn off
the power, unplug the equipment and contact the service center.
▪If you ignore these symptoms, the equipment may catch on fire
or cause electric shock.

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-6
Related Document
►The related documents are listed as follows. If needed, please contact staffs of our technical
support team and maintenance team.
▪Operator Manual
▪Service Manual
• VDM Manual
•Error Code Manual
•Quick Reference Guide
For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and
telephone numbers provided separately.

Installation Manual Chapter2. Introduction
© Nautilus Hyosung, Inc. All Rights Reserved. 2-1
Chapter2. Introduction
About the MX8200QTN
►The MX8200QTN is a full service ATM. Cardholders and/or customers deposit and
withdraw the cash and receive the transaction records with MX8200QTN ATM
The MX8200QTN is a versatile, easily maintained delivery system that can be modified to
keep pace with the bank's changing needs.
►The benefits that the new concept MX8200QTN provides are as follows.
Removes inconvenience which occurs when bank clerks directly handle cash with
customers and relieves workload upon tellers by processing deposit/withdrawal of cash
automatically.
Relieves risks and burden of directly handling cash by directly keeping cash deposited in a
safe.
Allows tellers to calculate and close amount on hand faster than the existing manual
calculation.
Abank customer and a teller can easily interact on a touch screen, just like talking, through
Nautilus Hyosung’s intuitive and easy UI.
Allows easy and quick installation and maintenance.
<Note!>
The figures/photos/diagrams in this manual are for well understanding therefore they may
be different from real machines.