Optimum H3000 User manual

USER MANUAL
H3000 ADVANCED
HORIZONTAL MASTICATING
COLD PRESS JUICER
QUALITY YOU CAN TRUST

SAFETYFIRST 1
GETTINGTOKNOWYOURH3000ADVANCEDHORIZONTALCOLDPRESSJUICER 3
USINGYOURH3000ADVANCEDHORIZONTALCOLDPRESSJUICER 4
JUICINGGUIDEFOROPTIMALRESULTS 7
CLEANING&MAINTENANCE 8
TROUBLESHOOTING 9
PRODUCTSPECIFICATIONS 10
WARRANTYTERMS&CONDITIONS(INTERNATIONAL) 11
CONTACTUS 12
CONTENTS

1
SAFETY FIRST
1. The input voltage of this appliance is between 220-240V, at 50-60Hz. Ensure the power source
is compatible with the appliance before connecting it to avoid damage to the appliance.
2. Ensure the appliance is connected to a properly grounded power outlet to avoid electric shock.
3. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they are
supervised or have been given instruction concerning the use of the appliance by a person
responsible for their safety.
4. This appliance should not be used by children under the age of 8. Always keep the appliance
and its power cord out of reach of children.
5. This appliance may be used and cleaned by children above the age of 8, provided adequate
supervision and instruction concerning the safety measures and hazards involved in using the
appliance.
6. If the power cord or plug are damaged, unplug the appliance from the power outlet and stop
using it immediately. Contact the authorised service centre for repair and servicing. Do not
attempt to replace the power cord. Unauthorised modification or repair of your appliance could
void your warranty.
7. Check the power cord, power plug and all parts and accessories before use. If you find any
abnormalities or damaged parts or if the appliance is malfunctioning, contact the authorised
supplier immediately for repair and servicing. Do not attempt to repair the appliance yourself to
avoid damage or the risk of injury.
8. Unplug the power cord from the power outlet before assembling, disassembling or cleaning
and never put your hands near any moving part of the appliance to avoid the risk of injury.
9. Ensure the detachable parts of the appliance are installed properly before use. The pulp
extractor and feeding chute should be clicked into the ‘lock’ position to prevent leakage,
spillage or the parts from coming apart during juicing.
10. Place the appliance on a flat, stable and level surface, away from any water or heat sources. Do
not use the appliance on carpets, towels, plastic, paper, or flammable surfaces.
11. The appliance is equipped with an intelligent protection chip, which automatically switches o
the appliance after 20 minutes of juicing. To increase the lifespan of the appliance, always allow
20—30 minutes for the motor to cool down between uses.
12. If the appliance is overloaded or blocked during juicing, it will stop automatically after a few
seconds. You can restart the appliance after hearing the ‘beep’ sound. If the blockage still
remains, unplug the juicer and remove any food debris or pulp and restart the appliance.
13. During juicing, if the warning alarm sounds or the operating buttons stop working, switch
o the appliance to find the problem. Clean the feeding chute and restart the appliance. If the
problem persists, stop using the appliance immediately and contact the authorised supplier for
repair and servicing.
14. Cut ingredients into smaller pieces to make juicing easier. Remove the peel and hard parts of
BEFOREUSINGYOURH3000ADVANCEDHORIZONTAL
MASTICATINGCOLDPRESSJUICER,PLEASE READTHESE
SAFETYINSTRUCTIONSCAREFULLY.

2
ingredients with thick skins, shells, pits and seeds to avoid damage or injury.
15. Always apply pressure gently on the ingredients using the pusher. Do not forcibly push
ingredients down the feeding chute during juicing.
16. Do not squeeze lemon juice directly into the appliance.
17. Always ensure the appliance conforms to food safety and hygiene standards by following the
cleaning and maintenance instructions in this manual.
It is a normal phenomenon for the juicing screw, juice strainer, feeding chute, juice cup or other
parts of the appliance to be stained by certain ingredients. It does not compromise the safety of
the appliance and will not pose any harm to your health.
18. The juicing screw is made of ceramic and can be broken easily. Handle it with care to prevent it
from slipping or falling.
19. Always clean the appliance promptly after use.
20. Exercise extra care when handing and cleaning parts of the appliance with sharp edges or
emptying the cups of their contents to avoid damage or injury.
21. Clean the appliance and its detachable parts, which come into direct contact with the
ingredients, with water after each use. Do not use abrasive materials, harsh cleansers or
corrosive liquids (e.g. acids, acetone, etc.) to clean the appliance.
22. Switch o and unplug the appliance during long periods of inactivity.
23. The appliance is meant for household use only. Adhere closely to the safety instructions in this
manual and do not use the appliance for any other purpose. This could void your warranty.
FAILURE TO FOLLOW SAFETY INSTRUCTIONS AND WARNINGS COULD
RESULT IN SERIOUS INJURY. MISUSE OF YOUR H3000 ADVANCED
HORIZONTAL MASTICATING COLD PRESS JUICER MAY DAMAGE YOUR
APPLIANCE AND VOID YOUR WARRANTY.
SAFETY FIRST, CONTINUED

3
GETTING TO KNOW YOUR H3000 ADVANCED HORIZONTAL COLD PRESS JUICER
1. Base
2. Safety Lid
3. Pusher
4. Feeding Chute
5. Juicing Screw
6. Ice-Cream Strainer (not pictured)
7. Juice Strainer
8. Pulp Extractor
9. Lock Catch
10. Juice Tap
11. Juice Cup
12. Pulp Cup
NOTE: Clean the appliance and its parts thoroughly before assembling the appliance for use. Always adhere to the
instructions in this manual for the best juicing results and your safety.
1
2
3
4
578
9
10 11
12

4
USING YOUR H3000 ADVANCED HORIZONTAL COLD PRESS JUICER
1 4
2
5
6
3
Attach the feeding chute to the base:
a. Align the arrows on both the feeding
chute and the lock catch;
b. Rotate the feeding chute counter
clockwise until it ‘clicks into the locked
position securely.
Attach the pulp extractor to the feeding chute:
a. Align the pulp extractor with the juicing
screw, juice strainer and feeding chute;
Rotate the pulp extractor counter
clockwise
b. Rotate the pulp extractor counter
clockwise to align the “▲” symbol on the
feeding chute with the “▲” symbol on the
pulp extractor.
Align the juicing screw with the feeding chute
and push it through until it fits into the lock
catch behind it.
Tip: Rotate the juicing screw slightly to install. Place the juice cup below the juice tap.
Place the pulp cup under the pulp extractor,
as close to the juice cup as possible.
Align the juice strainer with the juicing
screw and push it through towards the lock
catch on the base.
A AB B

5
7 9
8
10
Pull the juice tap towards you to open it. Press the ”Start/Stop” button to start
theappliance.
Tip: The juicer has a built-in smart safety
function which automatically stops the
appliance from juicing after 20 minutes. If you
need more time to juice your ingredients,
press the “Start/Stop” button again to restart
the appliance.
Wash and prepare your ingredients for juicing.
Tips:
• Cut fibrous vegetables, such as celery, into
• smaller pieces and feed them into the
juicer in small batches.
• Hard ingredients, such as lotus root, should
be cut into 30×30×90 mm pieces.
• The quantity should not exceed 1 kg
and juicing should be kept at less than 3
minutes at a time.
• Remove the peel and hard parts of
ingredients with thick skins, shells, pits and
seeds.
• Refer to the “JUICING GUIDE FOR
OPTIMAL RESULTS” section for more
information.
Add ingredients through the safety lid at
the top of the feeding chute, pushing the
ingredients downwards gently with the pusher.
Tip: Do not apply excessive pressure when
pushing the ingredients down the feeding
chute.

6
USING YOUR H3000 ADVANCED HORIZONTAL COLD PRESS JUICER, CONTINUED
11 12
Press the Reverse button when the juice
does not flow smoothly or the feeding chute
is blocked. The juicing screw will begin
to reverse and stop automatically after 2
seconds. If the problem still persists, repeat
this step and press the “Start/Stop” button to
resume juicing.
When juicing is complete and no more juice
is flowing from the juicing tap, switch o the
appliance and close the juice tap. Remove the
juice and pulp cups. Pour the juice into a glass
to serve.
Tip: Drink the juice as soon as possible to
maintain its freshness. The taste and nutrition
may be aected through oxidation if subjected
to prolonged exposure to air.

7
USING YOUR H3000 ADVANCED HORIZONTAL COLD PRESS JUICER, CONTINUED JUICING GUIDE FOR OPTIMAL RESULTS
The Optimum H3000 Advanced Horizontal Masticating Cold Press Juicer is extremely versatile
and achieves great results every time. Please take the time to familiarise yourself with the juicing
techniques below for optimal results.
DROP YOUR INGREDIENTS
DO NOT press, push or shove ingredients forcibly into your H3000 Advanced Horizontal Masticating
Cold Press Juicer. Instead, simply allow your ingredients to fall into the feeding chute. The juicing
screw does all the work for you. Virtually no force is necessary!
JUICE IN ASCENDING FIBRE CONTENT
Feed ingredients into the juicer from the lowest in fibre to the highest. When juicing particularly
fibrous ingredients, such as large, leafy, stringy or dense vegetables, feed them to the feeding chute
gently, allowing the juicing screw to pull the ingredients into the appliance. Only use the pusher
gently, if required.
ITISIMPORTANTTOFOLLOWTHEABOVEGUIDELINESTOACHIEVETHEBESTRESULTS
FROMYOUROPTIMUMH3000ADVANCEDHORIZONTALMASTICATINGCOLDPRESS
JUICER.

8
CLEANING & MAINTENANCE
To ensure that you always get the best results possible using the Optimum H3000 Advanced
Horizontal Masticating Cold Press Juicer, you need to take the time to clean it after each use. To do
so, follow the instructions carefully.
• Always ensure the appliance is switched o and unplugged from the power outlet before
• cleaning it.
• Clean the appliance promptly after each use to avoid any diculty in removing food waste.
• Using a wet cloth, wipe the exterior of the appliance. Do not submerge the appliance in water or
• other liquids, nor wash the appliance with water or other liquids.
• Store the appliance in a dry and cool place, avoiding direct sunlight.
• Ensure the appliance is clean and dry before storage.
• Disassemble the appliance before cleaning, according to the instructions below:
1 3
2
Press and rotate the pulp extractor clockwise
and remove the food waste in the feeding
chute.
Tip: The pulp extractor needs to be pushed
inwards towards the feeding chute in order to
be detached
Wash, clean, and dry the parts you detached
from the appliance.
Remove the juice strainer, juicing screw, and
feeding chute from the base.