6
Charging the product battery
•Battery level indicator on the display
screen will flash to show that the
uCrown Smart is low in battery.
•Connect the uCrown Smart using the
supplied USB cable to a power source.
Double ‘beep’ sound can be heard once
it is connected.
•The battery level indicator bar will move
while it is charging. Once fully charged,
the battery level bar will be full.
•The uCrown Smart will not work while it
is charging.
•Each full charge (approximately 3.5-4
hours) lasts up to 160 minute of usage.
Turning the product on/off
•Press the [ ] button and it will emit
a ‘beep’ sound to indicate that the
uCrown Smart is turned on.
•Press and hold the [ ] button for
around 2 seconds until it emits a double
‘beep’ sound to indicate that the
uCrown Smart is turned off.
•The uCrown Smart will automatically
start ‘Mode 1’ program once it is turned
on.
Connecting uCrown Smart to the
music source
•Music Stream on product via BT from
smart device or any BT enabled music
player.
•Turn on the Bluetooth on your device.
Search for BT, OS1201 XXXXXXXX.
• Connect and wait for connection
confirmation.
•Start streaming.
•For ease of convenience, Bluetooth is
automatically connected to last paired
user.
Massage program selection
•Press the [ ] button anytime to cycle
through the 2 auto massage programs.
•Each auto massage program comes
with a different music track and during
the auto massage programs, the music
function can be turned on or off by
pressing the [ ] button.
i. Mode 1 (1 ‘beep’ sound and the
15 minute massage will begin).
ii. Mode 2 (1 ‘beep’ sound and the
15 minute massage will begin).
Operation
