2c
1
3
4
2a
2b
IS-420
K7
K8
K9
K4
K1
K2 K5
K6
K3
For more specific information about your
mailing system, see the User Guide.
Press Clear or Wake
To reset previous settings...
Key the postage in directly
If you know the amount...
Choose rate and services
When the weight is displayed...
Consumables: contact your local dealer.
Put your mail on the scale
To weigh your mail...
or
Enter the weight manually
Getting to know your mailing system
Applying postage
Changing the ink cartridge
Screen main zones
Switch
1
2
1
2
If needed, press to get back to the
home screen.
To get back to default rate settings, press
on the keyboard.
If the system is asleep, press to wake it
up with default settings.
1
2
3
Current rate and selected
services are displayed in
this zone of the screen.
Rate & services (to change: K1)
Date printed (to change: K4)
Weighing method (to change: K6)
Stamp position offset
Postage and weight
Memorized imprint (can contain rate, stamp settings
and account)
Current account
D1
D2
D3
D4
D5
D6
D7
K1
K2
K3
K4
K5
K6
K7
K8
K9
Rates and services selection
Memorized imprints (rate, stamp settings, account)
Funds management
Type of stamp and Stamp settings
Printing on label
Weighing modes
Sleep / wake (amber / green)
Stops printing
Starts printing
Check that the D3 icon is .
Otherwise, press and then select the
option Standard weighing.
Press and then select the option
Manual weight entry.
Enter the weight and press OK.
Press OK to validate your selection and
return to the home screen.
Use the keypad to select an available Class
and/or Services, or select key 8 for the wizard.
To change the rate and/or add services:
Press .
The rate selection
screen is displayed.
If needed, power on your system with this
switch, located near the power cord.
1
2
On the new ink cartridge,
remove the protective strips
from the printing heads.
Raise base cover and
follow instructions printed
on sticker inside.
Print the stamp
To print on labels
When the postage is displayed...
1
2
If you want to print on a label, see the alternative
sequence below.
Press to start the motors of your mailing
system.
Insert the mail piece in
the mail path, the stamp
printing position on the
upper right side.
Insert labels into the
dispenser until the click,
printing side facing the
right.
Press to enter the number of labels
to print and then press .
1
2
If jamming occurs... Adding funds
Press , type 2and follow the instructions onscreen.
Note: to complete this operation successfully, your postal
services account must have a positive credit balance of
the corresponding amount.
Press on the control
panel.
Under the base, lift up the
release handle and, using
your other hand, remove
envelopes or labels from
the mail run.
1
2
1
2
Type the amount on the keyboard.
Press OK.
The home screen
displays the postage.
kb.quadient.us/is420_ug
4138951G/C - 18/03/2020
Shortcut keys
D5
D6
D7D4
D3
D2
D1
