Sega OUTRUN 2 SPECIAL TOURS DELUXE User manual

SERVICE MANUAL
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
SERVICE MANUALOUTRUN 2 SPECIAL TOURS DX 420-7005-01
Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan
Phone: [phone] Facsimile: [phone]
© SEGA
420-7005-01
1ST PRINTING

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. After carefully reading and sufficiently understanding the warning
displays and cautions, handle the product appropriately. Be sure to keep this manual close to the
product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the
product by disregarding this
pictograph will cause severe
injury or death.
Indicates that mishandling the
product by disregarding this
warning will cause a potentially
hazardous situation which can
result in death or serious injury.
Indicates that mishandling the
product by disregarding this
caution will cause a slight
hazardous situation which can
result in personal injury and/or
material damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and
equipment, this display is attached to places where the Owner's Manual, Serviceman
Manual and/or Service Manual should be referred to.
Indicates a "Protective Earth Terminal." Before operating the equipment, be sure to
connect it to the Ground.
(The step may be omitted for products in which a power cord with earth is used.)
❍Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention.
Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.
❍Be sure to turn off the power before working on the machine.
To prevent an electric shock, be sure to turn off the power before carrying out any work that
requires direct contact with the interior of the product. If the work is to be performed in the
power-on status, the Instruction Manual herein always states to that effect.
❍Be sure to ground the Earth Terminal.
(This is not required in the case where a power cord with earth is used.)
This product is equipped with the Earth Terminal. When installing the product, connect the
Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.
Unless the product is grounded appropriately, the user can be subject to an electric shock.
After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly
connected to the control equipment.
❍Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is
not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
❍Be sure to use fuses which meet the specified rating.
(Only for the machines which use fuses.)
Using fuses exceeding the specified rating can cause a fire and an electric shock.

❍Specification changes (removal of equipment, conversion and addition) not
designated by SEGA are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc.
It is very hazardous to operate the product by removing parts and/or modifying the circuits.
Should doors, lids and protective parts be damaged or lost, refrain from operating the product,
and contact where the product was purchased from or the office herein stated.
SEGA shall not be held responsible for any accidents, compensation for damage to a third
party, resulting from the specifications not designated by SEGA.
❍Ensure that the product meets the requirements of appropriate Electrical
Specifications.
Before installing the product, check for Electrical Specifications. SEGA products have a
nameplate on which Electrical Specifications are described. Ensure that the product is
compatible with the power supply voltage and frequency requirements of the location. Using
any Electrical Specifications different from the designated Specifications can cause a fire and
an electric shock.
❍Install and operate the product in places where appropriate lighting is
available, allowing warning labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially
hazardous situations are applied to places where accidents can be caused. Ensure that where
the product is operated has sufficient lighting allowing the warnings to be read. If any label is
peeled off, apply it again immediately. Please place an order with where the product was
purchased from or the office herein stated.
❍When handling the monitor, be very careful.
(Applies only to the product with a monitor.)
Some of the monitor (TV) parts are subject to high tension voltage. Even after turning off the
power, some portions are still subject to high tension voltage sometimes. Monitor repair and
replacement should be performed only by those technical personnel who have knowledge of
electricity and technical expertise.
❍Be sure to adjust the monitor/projector properly.
(Applies only to the product with a monitor/projector.)
Do not operate the product leaving on-screen flickering or blurring as it is. Using the product
with the monitor/projector not properly adjusted may cause dizziness or a headache to an
operator, a player, or the customers.
❍When transporting or reselling this product, be sure to attach this manual to
the product.
In the case where commercially available monitors and printers are used in this product, only
the contents relating to this product are explained herein. Some commercially available
equipment has functions and reactions not stated in this manual. Read this manual together
with the specific Instruction Manual of such equipment.
* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any
question arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status.
❐Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
❐Are Casters and Adjusters damaged?
❐Do the power supply voltage and frequency requirements meet with those of the location?
❐Are all wiring connectors correctly and securely connected? Unless connected in the correct
way, connector connections can not be made accurately. Do not insert connectors forcibly.
❐Do power cords have cuts and dents?
❐Do the fuses used meet specified ratings? Is the Circuit Protector in an energized status?
❐Are all accessories available?
❐Can all Doors and Lids be opened with the Accessory Keys? Can Doors and Lids be firmly
closed?

TABLE OF CONTENTS
i
TABLE OF CONTENTS
E0-0702 420-7005-01
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS ....................................................................................... i
INTRODUCTION ................................................................................................. ii
1PRECAUTIONS REGARDING PRODUCT OPERATION ............................. 1
1-1 BEFORE OPERATION .....................................................................................................1
1-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ..................................4
2GAME DESCRIPTION ................................................................................... 8
2-1 BASIC CONTROLS..........................................................................................................9
2-2 GAME OUTLINE.............................................................................................................10
2-3 SETUP SCREEN ORDER AND CONTENTS.................................................................11
2-4 GAME INSTRUCTIONS .................................................................................................22
2-5 NAME ENTRY AND INTERNET RANKING ...................................................................30
3EXPLANATION OF TEST AND DATA DISPLAY......................................... 32
3-1 SWITCH UNIT AND COIN METER ................................................................................34
3-2 SYSTEM TEST MODE ...................................................................................................35
3-3 GAME TEST MODE .......................................................................................................39
3-4 SETTINGS FOR WHEN ONE UNIT HAS BROKEN DOWN..........................................62
4ERROR DISPLAY ........................................................................................ 63

ii
TABLE OF CONTENTS
INTRODUCTION
This manual presents information and explanations on how to manage settings and run software for “OUTRUN 2
SPECIAL TOURS DX.”
This manual is intended for the owners, personnel and managers in charge of operation of the product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed below or the point of purchase for this product.
For information on mechanical or hardware maintenance, see the owner’s manual.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word "IMPORTANT" and the symbol below.
Indicates important information that, if ignored, may result in the mishandling of
the product and cause faulty operation or damage to the product.
Sega Amusements U.S.A., Inc.
800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.
TEL: [phone]
TOLL FREE: 1-888-877-2669
FAX: [phone]
SEGA AMUSEMENTS EUROPE, LTD.
Suite 3a, Oaks House 12-22, West Street, Epsom, Surrey, KT18 7RG, United Kingdom
Telephone: [phone] Facsimile: [phone]
e-mail: [email protected] http://www.sega-amusements.co.uk

INTRODUCTION
iii
Denition of ‘Site Maintenance Personnel or Other Qualied Individuals’
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialized knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/
expendable parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or
maintenance of amusement equipment. The individual should have either graduated from technical school or hold
similar qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Procedures not described in this manual or marked as 'to be carried out by site
maintenance personnel or other qualified professionals' should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualied persons may cause serious accidents, including electrocution.

PRECAUTIONS REGARDING PRODUCT OPERATION
1
1
PRECAUTIONS REGARDING PRODUCT OPERATION
1
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
1-1 BEFORE OPERATION
• Check if all of the adjusters are in contact with the surface. If they are not, the
cabinet can move and cause an accident.
• To ensure safety, carry out a trial run before starting operation, and be sure to
check the safety devices. Each ride moves, so each is equipped with safety
devices. Be sure to check that these safety devices function normally.
- Does the ride stop when the MOTION STOP button at the center of the control
panel is pressed?
• Check each safety device and also check to see if any of the rides move
abnormally. Abnormal motion may cause an accident, so do not operate the
machine until the cause of the abnormality has been removed.
- Does the ride move in the direction corresponding to the direction of
operation?
- Does the ride move smoothly?
- Is there any undesirable looseness in the ride?
- Is any unusual noise emitted while the ride is operating?
- Is any unusual vibration emitted while the ride is operating?
- Does the ride stop at an even position when the game is over?

1
PRECAUTIONS REGARDING PRODUCT OPERATION
2
• If an abnormality occurs in the ride mechanism, immediately stop operation,
turn off the power, and contact the ofce indicated in this manual or the point of
purchase. If you continue to operate the machine while there is an abnormality
in it, a serious accident such as an electric shock, short circuit, re, or a fall may
occur.
• The motion of the ride will not stop when the ride is touched by anybody other
than a player. Be sure to monitor the machine during a game.
• If a part related to the actuator of the ride mechanism breaks or deforms,
for example, necessitating replacement or repair of the part, request the
ofce indicated in this manual or the point of purchase to carry out this work.
Specialized knowledge, technical expertise, and tools are necessary for
carrying out this work. If you attempt to carry out this work yourself, an accident
may occur.
• Be sure to perform appropriate adjustment of the projector. For operation of this
machine, do not leave monitor's ickering or deviation as is. Failure to observe
this can have a bad influence upon the players' or the customers' physical
conditions.
• It is suggested to prepare a rest space for players who feel sick after playing the
game.
• Do not put any heavy item on this product. Placing any heavy item on the
product can cause an accident fall or parts damage.
• Do not climb on the product. Climbing on the product can cause an accident
fall. To check the top portion of the product, use a step ladder.
• To avoid electric shock, check to see if door & cover parts are damaged or
omitted.
• To avoid electric shock, short circuit and/or parts damage, do not put the
following items on or in the periphery of the product.
Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/
containers/vessels containing chemicals and water.

PRECAUTIONS REGARDING PRODUCT OPERATION
1
3
• Players directly hold the controller with their bare hands so it is recommended
that wet towels (paper towels) be provided.
• Endeavor to clean the steering wheel and seat frequently.
• Provide a container or space for storing the customers’ hand luggage, etc. To
help prevent an accident and also protect parts, establish measures so that
customers do not bring raingear, such as umbrellas, on rainy days, or juice or
other beverages, into the area where the machine is installed.
• During network play, if communication is interrupted for some reason, each
game will continue independently. Also, if communication is interrupted while in
Customer Welcome Mode, the Test Screen will appear.
• When one cabinet connected for network play enters the Test Mode, the other
cabinets will move to the Test Screen. For this reason, do not needlessly put
a cabinet in the Test Mode while a customer is playing a game, even if the
cabinet is not being used.
• You can make game settings and coin/credit (fee) settings individually, even
for cabinets that are connected for network play. You can also change the
settings of an individual cabinet to those for advanced players or beginners, for
example. Normally, however, set all of the cabinets to the same settings. If you
make a mistake in the fee setting, it is likely that the balance of payments and
other items will be adversely affected.
• Inspect for the following items during a trial run. If there is any type of error, use
the Test Mode, etc., to resolve the problem. If you continue use with an error, it
can cause an accident or irreparable parts damage.
- Do the steering wheel and the ride move smoothly during the initialization
operation? (See Chapter 7.)
- Is there any strangeness in the operability of the steering wheels or the
pedals?
- Is there any abnormality in the steering wheel reaction mechanism?
- Is there any improper adjustment of the projector screen?
- Are the bellows torn or has a screw dropped out of them?
• During daily cleaning, be sure to check the surface of the steering wheel, gear
shifter, and other parts that the player touches with his hands for damage,
cracks, or loose screws. If a player uses the machine while it is damaged,
cracked, or has a loose screw, the player may become injured.
• During daily cleaning, be sure to check that nothing has been left on the seat,
or that the seat is not wet, etc. Failure to check may result in articles or moisture,
left intentionally or unintentionally, to remain on the seat.

1
PRECAUTIONS REGARDING PRODUCT OPERATION
4
1-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
In order to prevent an accident or unnecessary trouble, the attendant or operator must endeavor to always pay
attention to the behavior of the players and customer. This machine has movable rides of about the same size as an
automobile. Sometimes a player or a customer may behave in an unexpected way. Be adequately aware of safety,
and stop any behavior that is considered dangerous.
• For safety, do not allow any of the following people to play the game.
- Those who have high blood pressure or a heart problem.
- Those who have experienced muscle convulsion or loss of consciousness
when playing video games, etc.
- Those who have neck or spinal cord problems.
- Those who are intoxicated or under the inuence of drugs.
- Pregnant women or those who could be pregnant.
- Those who are not in good health.
- Those who do not follow the attendant’s instructions.
- Those who cannot grasp the Control Unit (Gun) securely because of
immobility in ngers, hands or arms.
- Persons who disregard the product’s warning displays.
The game cannot be played while sitting in a wheelchair.
• For safety’s sake, a person of less than 140 cm in height cannot play games on
this machine. Because of the dimensions of the seat and the place where the
player puts his or her feet, there is a risk that when the ride moves the player
may fail to support their weight, causing the player to fall off the ride.
• Even players who have never been adversely affected by light stimulus might
experience dizziness or headache depending on their physical condition when
playing the game. Small children are especially likely to experience these
symptoms. Caution guardians of small children to keep watch on their children
during play.
• Instruct those who feel sick during play to have a medical examination.
• To avoid injury from falls and electric shocks due to spilled drinks, instruct the
player not to place heavy items or drinks on the product.
• To avoid electric shocks and short circuits, do not allow customers to put
hands and ngers or extraneous matter in the openings of the product or small
openings in or around the doors.
• For safety’s sake, warning indicators such as stickers are placed on the
machine. However, a careless player will generally fail to read these warnings.
The attendant must point out steps and level differences on the ride in order to
prevent the occurrence of an accident.
• To avoid falls and resulting injury, immediately stop customers from leaning
against or climbing on the product, etc.

PRECAUTIONS REGARDING PRODUCT OPERATION
1
5
• No more than 2 persons should sit on each ride of this machine. Instruct
customers that 3 or more players must not sit on a ride. Failure to observe
this precaution may result in players striking their bodies against each other,
causing them to receive blows, fall over, or fall off the ride.
• Instruct customers not to get on or in any ride part, such as the rear of the ride
or behind the back of the seat, other than the seat. Failure to observe this
precaution may results in players falling over, falling off, or catching body parts
in the ride.
• Entering the cabinet with a wet umbrella or wet shoes is strictly forbidden. There
are electrical parts and wiring underneath the cabinet floor. If these become
wet, this can cause an electric shock or short circuit. Be especially careful in
managing the product on rainy days.
• Take care not to place a heavy object on a ride or seat. This may cause the
object to strike the player when the ride moves.
• Instruct customers not to play a game with a child on their knees. This may
cause an accident such as the child becoming caught between the control
panel and the player or the child falling off the ride.
• Instruct players not to stand during a game in which the ride moves. This may
result in the player falling off the ride or falling over.
• Instruct persons other than players to keep away from the machine while a
game is in progress. If a person touches the moving ride, this may result in an
accident such as the person falling over or getting his or her ngers caught in
the bellows.
• An infant is unable to recognize danger, so instruct the guardian of the infant to
be attentive and ensure that the infant does not approach the machine.

1
PRECAUTIONS REGARDING PRODUCT OPERATION
6
• Immediately stop such violent acts as hitting and kicking the product. Such
violent acts can cause parts damage or cause the cabinet to fall over, resulting
in injury.
• Items such as large finger rings can cause injury to the fingers while playing.
Instruct players to remove all accessories that could cause an accident before
playing.
• Take care to ensure that two persons do not attempt to play a game by
grasping a single steering wheel. Failure to heed this precaution may result in a
minor or a major collision.
• Explain that the MOTION STOP button can be pressed to stop play whenever the
player feels ill.
• Explain that the attendant will stop the game if he or she judges that a situation
is dangerous.
• Take care to ensure that other customers do not touch operating devices during
a game. Failure to heed this precaution may result in an accident or cause
trouble between customers.
• There are steps and level differences on each ride, so instruct players to be
careful when getting on or off the ride.
• Do not allow players to extend their hands or feet out from the ride during play.
Otherwise there could be bruises, sprains or other accidental injuries.
• Instruct the player to adjust the seat in the front-rear direction to match his or
her body size. If a player plays a game in an unreasonable posture, he or she
may sustain an injury or incur discomfort.

PRECAUTIONS REGARDING PRODUCT OPERATION
1
7
• The load limit on one ride of the machine is 300 kg. If you allow a person or
persons weighing more than the load limit to get on a ride and operate it, the
ride may break down or wear considerably.
• If a player carries hand luggage or other items onto a ride, objects may fall off
or roll over, for example, when the ride moves, resulting in injury or damage.
Also, instruct players not to take breakable items, etc., onto the ride.
• After the end of a game, check to ensure that the player has not forgotten or
dropped any belongings.

2
GAME DESCRIPTION
8
GAME DESCRIPTION
2
The following explanations apply when the product is functioning satisfactorily. Should there be any operations
different from the following contents, some sort of abnormality may have occurred. Immediately look into the cause
of the fault and eliminate the cause thereof to ensure satisfactory operation.
The uorescent lights of the billboard and the rear lamp will constantly be illuminated when they have power.
The projector screen is showing the demo video or rankings.
Also, you can choose if sound will be output during Customer Welcome Mode via the settings in Test Mode.
The START button and the VIEW CHANGE button on the control panel are integrated with a lamp.
FIG. 2a

GAME DESCRIPTION
2
9
2-1 BASIC CONTROLS
[Starting the Game]
- Insert a coin and press the START button.
- At the Selector Screens, choose the number of drivers, cars to be used in the game, game mode, BGM, and so on.
Players highlight selections with the steering wheel, and make choices with the gas pedal or START button.
[Game Controls]
- Control the car with the steering wheel, advance the car with the gas pedal, and stop the car with the brake pedal.
- When using manual transmission, use the gear shifter to shift gears up and down.
- Switch between the three viewpoints using the VIEW CHANGE button.
- Stop the ride (car body) from moving with the MOTION STOP button. The ride will not move again for the
duration of the game.
FIG. 2b

2
GAME DESCRIPTION
10
2-2 GAME OUTLINE
This product is a driving game with moving rides.
One or two people ride in one ride, and play the game.
When 2 people are driving, they ride in the left and right driver seats, and if their car collides with another car, hits a
wall, or reaches a fork in the road, control of the car will switch to the other driver.
Players race to reach the nish line within the time limit.
The time limit is extended at each checkpoint.
The game ends when the player runs out of time or reaches the goal.
Each game stage ends with a fork in the road where the player must decide the route using the car during the race.
The left-hand routes lead to less difcult stages.
The game has two courses, the OutRun2SP course and the OutRun2 course. A single course consists of 15 stages,
with ve separate goal areas.
The three single player game modes are OutRun Mode, Heart Attack Mode, and Time Attack Mode.
Versus Play allows up to two cabinets (4 people) to participate.
Route Guide with stage names
OutRun2SP Courses
5A: Giant Statues
4A: Lost City
3A: Water Falls 5B: Legend
2A: Bay Area 4B: Casino Town
1A: Sunny Beach 3B: Big Forest 5C: Floral Village
2B: National park 4C: Ice Scape
3C: Canyon 5D: Milky Way
4D: Jungle
5E: Skyscrapers
OutRun2 Courses
5A: Tulip Garden
4A: Cloudy Highland
3A: Castle Wall 5B: Metropolis
2A: Deep Lake 4B: Industrial Complex
1A: Palm Beach 3B: Coniferous Forest 5C: Ancient Ruins
2B: Alpine 4C: Snow Mountain
3C: Desert 5D: Imperial Avenue
4D: Ghost Forest
5E: Cape Way

GAME DESCRIPTION
2
11
2-3 SETUP SCREEN ORDER AND CONTENTS
This section explains the available options and controls for the setup screens.
1. Versus Mode Entry
If several machines are linked together
(when the ride is coin-based), inserting a
coin and pressing the START button on one
machine will result in the message “Entry
has been closed. Please stand by.” to be
displayed on the screen, following which
opposing players have the chance to enter
the race on other machines.
Any linked machines that players can
race on display the message, “Waiting for
entries.” Other players can join the race by
inserting a coin and pressing the START
button.
NOTE: See the later section“ 3. Versus Play
Setup” for details of game ow after
all players have joined the race.
Closing Versus Mode Entry
To close Versus Mode entry, press the VIEW CHANGE button and the brake pedal at the same time before other
players join. (Press the brake pedal while holding down the VIEW CHANGE button.)
Versus Mode entry time can also be run down to “0” by holding the START button, thus closing Versus Mode entry.
By closing Versus Mode entry in either of the above ways, the Single Player Mode will commence, provided no
players have already joined.
NOTE: See the later section “ 2. Single Player Setup” for details of game ow after a single player race has been
selected.
Selector Screen 01
Selector Screen 02

2
GAME DESCRIPTION
12
2. Single Player Setup
(1) Choose Main Driver
Controls:
In the left or right seat, press the gas pedal
to choose that side as the Main Driver (the
person who will play rst).
After the Main Driver has been decided, the
control panel on the Main Driver’s side will
light up green. After Main Driver selection,
the Selector Screens can only be operated
with the steering wheel and pedals on the
Main Driver side.
(2) Selection of Number of Drivers
Controls:
From the Main Driver side, highlight the
desired player count -- “1 Driver” or “2
Drivers” -- with the steering wheel, and
conrm the choice with the gas pedal.
When playing in “1 Driver,” “OutRun
Mode,” “Heart Attack Mode,” and “Time
Attack Mode” can be chosen, but only
“OutRun Mode” can be chosen when using
“2 Drivers.”
A message telling players to add credits will
be displayed on top of the 2 Drivers icon.
Inserting the designated amount of credits
(coins) will allow the 2 Drivers icon to be
selected.
Selector Screen 03
Selector Screen 04

GAME DESCRIPTION
2
13
(3) Player’s Car Selection
Controls (Main Driver Side):
[Steering Wheel: View Choices],
[Gas Pedal: Enter Selection],
[“Brake Pedal” + “Shift”: Color Change]
The player can select one of the following
10 cars:
“F50”, “Enzo Ferrari”, “360 Spider” , “F40”,
“Testarossa”, “288 GTO”, “512 BB”, “Dino
246 GTS”, “365 GTS/4 Daytona”, “250
GTO”
Changing the Car Color
Pressing the brake pedal on the Main
Driver side displays the available colors for
the player’s car at the bottom-right of the
screen. A color can be selected by moving
the gear shifter up or down. In accordance
with the selected color, the color of the car
displayed on the screen also changes.
(4) Transmission Selection
Controls (Main Driver Side):
[Steering Wheel: View Choices],
[Gas Pedal: Enter Selection]
After the player has selected a car, they can
then choose the type of transmission.
• Automatic Transmission:
Shifting gears up and down is performed
automatically (the player does not use
the gear shifter).
• Manual Transmission:
The player shifts gears up and down
using the gear shifter.
For Manual Transmission, the number of gears depends on the model of the car.
6-Speed : F50, Enzo Ferrari, 360 Spider
5-Speed : F40, Testarossa, 288 GTO, 512 BB, Dino 246 GTS, 365 GTS/4 Daytona, 250 GTO
Selector Screen 05
Selector Screen 06
Selector Screen 07

2
GAME DESCRIPTION
14
(5) Game Mode Selection
Controls (Main Driver Side):
[Steering Wheel: View Choices], [Gas Pedal: Enter Selection], [View Change Button: OutRun2/OutRun2SP]
The player selects which game mode they will play.
• OutRun Mode:
<Try to reach the goal with your girlfriend.>
Earn points by overtaking enemy or rival cars on your way to the nish line.
• Heart Attack Mode:
<Try to get as many “HEARTS” as possible by meeting your girlfriend’s demands.>
Carry out the various requests your girlfriend makes and try to accumulate hearts.
• Time Attack Mode:
<Drive against the Ghost Car and challenge for the course record!!>
Compete against the fastest time achieved by another player on the machine (the ghost car) to set a new record.
NOTE: Seethesection“2-4GameInstructions”forfurtherdetailsofeachmode.
Pressing the VIEW CHANGE button allows the player to select the course OutRun2.
Pressing the VIEW CHANGE button again allows the player to select the OutRun2SP course.
Selector Screen 08
Selector Screen 09