Sharp AR-FN5N User manual

CODE : 00Z
qSERVICE MANUAL
CONTENTS
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION This document has been published to be used
for after sales service only.
The contents are subject to change withoutnotice.
ARFN5N/A1E
Digital copier option
Staple sorter
MODEL AR-FN5N
[ 1 ] SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[ 2 ] UNPACKING AND INSTALLATION.. . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 3 ] EXTERNAL VIEW AND INTERNAL STRUCTURE. . . . . . . .Refer to AR-FN5
[ 4 ] OPERATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 5 ] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 6 ] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 7 ] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 8 ] TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[ 9 ] CIRCUIT DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[10] OUTLINE MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
[11] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . .Refer to AR-FN5
‡PARTS GUIDE
[ NOTE ] The AR-FN5N Service Manual and Parts Guide describes only the different points from the AR-FN5.
For the items which are not described in this manual, refer to the following service document.
• AR-FN5 Service Manual(Document code : 00ZARFN5//A1E)
• AR-FN5 Parts Guide (Document code : 00ZARFN5//P1E)

AR-FN5N
Æ•‚•‚1Æ
[1] SPECIFICATIONS
1. TYPE
Installation-to-the-copier type
2. TRAY
Number of trays:2
Type: Upper tray, normal type
Lower tray, lift-up type (with the offset function)
Capacity: Upper tray, 100 pages
Lower tray, 1,000 pages (500 pages for A4/Letter or
greater)
3. PAPER TRANSPORT
Center reference
4. PAPER EXIT SYSTEM
Face down
5. PAPER EXIT SIZE
Upper tray: A4 / A4R / A5 / A5R / B4 / B5 / B5R / A5 / 11x17 /8.5x14 /
8.5x13 / 8.5x11 / 8.5x11R / INV / FC / OHP /Label sheet /
Second original / 16k / 16kR / 8k
Lower tray: A3 / A4 / A4R / B4 / B5 / B5R / 11x17 / 8.5x14 / 8.5x13 /
8.5x11 / 8.5x11R / FC / 16k / 16kR / 8k
6. PAPER WEIGHT
52 ~ 128g/m 2(Upper/lower trays)
7. PAPER EXIT FULL DETECTION
Provided (Upper/lower trays)
8. OFFSET
Offset allowed: Lower tray
Offset quantity: 27mm
9. PAPER EXIT JOB
Machine tray: Printer, FAX, and copy output
Finisher upper tray: FAX output and interruption output
Finisher lower tray: Copy, printer output
10. STAPLE SECTION
Staple allowed: Lower tray
Binding capacity: Max. 30 pages (80g/u or less)
Paper size: AB series: A3, B4, A4, A4R, B5
Inch series:11x17, 8.5x14, 8.5x13, 8.5x11, 8.5x11R
For Mainland China: A3, B4, A4, A4R, B5, 16k, 8k
Binding reference: Parallel binding at one position
Staple supply: Cartridge-type (3,000 pcs. or more)
Detection: Staple empty detection, no cartridge detec-tion
Manual stapling: Not provided.
11. POWER SOURCE
Supplied from the copier. 24V
12. POWER CONSUMPTION
63W (Max.)
13. EXTERNAL DIMENSIONS
Finisher paper exit section: 470(W) x 511(D) x 540(H) mm
Compiler section: 562(W) x 444(D) x 109(H) mm
14. WEIGHT
About 19kg (Finisher body 12kg, compiler section 7kg)

AR-FN5N
Æ•‚•‚2Æ
ÇPARTS GUIDE
1Exteriors
3Lift up section
4Offset tray section
5Alignment section 1
6Alignment lower cabinet section 2
8Transfer Paper Guide lower unit
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
3GCAB-0054QSZ1 AR C Left upper cabinet
16 CSW-M0014QS52 AP E Interlock switch
19 GCAB-0058QSZ1 AH D Stapler cabinet
20 GCAB-0055QSZ1 AY D Front cabinet
24 TLABH0298QSZZ AF D Jam label(except Japan)
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
12 LFRM-0057QSZ1 AN C Lift up frame
27 CPWBX0108QSE3 BV N E Finisher PWB
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
22 LSOU-0032QSZ1 AU D Offset upper tray
501 CPLTM0226QS51 BK E Offset tray lower unit
502 CSOU-0032RS51 AZ N E Offset tray upper unit
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
13 LSOU-0029QSZ1 BD C Alignment tray lower
17 PCOVP0068QSZ1 AH D Stapler cover
18 CSW-M0014QS51 AP E Interlock switch unit
27 PGIDM0080QSZ1 BA C Transport guide lower
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
19 LSOU-0029QSZ1 BD C Alignment tray lower
501 CBRC-0006RS51 AY B Alignment motor unit
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
11 PGIDM0080QSZ1 BA C Transport guide lower
12 LPLTP0208QSZ1 AK D Transprot change gate R

AR-FN5N
Æ•‚•‚3Æ
9Alignment lower cabinet 1
9Alignment lower cabinet 1
FPaper fixing guide upper unit
GPacking material & Accessories
HFinisher PWB
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
21 PCOVP0067QSZ1 AL D Alignment tray cover
22 LSOU-0029QSZ1 BD C Alignment tray lower
26 LPLTP0204QSZ1 AD C Rear edge plate
39 PSPAZ0032QSZZ AC C Side reguration plate spacer
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
30 LPLTP0278QSZ1 AD C Paper hold plate
501 CPLTM0223QS51 AY E Pepar fixing unit
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
17 CSOU-0032RS51 AZ N E Offset tray upper unit
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
(Unit)
901 CPWBX0108QSE3 BV N E Finisher PWB
39
FCP05245
39

q
SHARP CORPORATION
Digital Document Systems Group
Products Quality Assurance Department
Yamatokoriyama, Nara 639-1186, Japan
2002 May Printed in Japan t
COPYRIGHT 2002 BY SHARP CORPORATION
All rights reserved.
Printed in Japan.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted.
In any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.