Skymsen JB35 User manual

JB35
JB35-2
Office
Phone: [phone]
Fax: [phone]
Warehouse
Phone: [phone]
Fax: [phone]
www.skyfood.us[email protected] -
TOLL FREE 1-800-503-7534
UG0072 - August /2011
Instructions Manual
Electric Crepe Cooking Machine
Models
JB35 / JB35-2

Electric Crepe Machine & Griller
. Introduction?
The Electric Crepe Machine & Griller is a new kind of our factory’s electric thermal
products. They are made with advanced foreign technology and use the hi-quality electric
thermal components so that they have the quality reliability. Because the tray is dealt with the
treatment of special non-stick techno, the workingeffect is more perfect. They are all stainless
steel structure, good-looking and resistant. The Electric Crepe Machine & Griller is easy to
operate, convenient to maintain, and suit for frying all kinds of food such as biscuits, eggs and
dumplings.
. Technical Data?
MODEL DIAMETER
RATED RATED RATED
POWER VOLTAGE FREQUENCY
DIMENSION NET
WEIGHT SHIPPING
WEIGHT
JB-35-2
JB-35 350mm
350mmx2
3kW
3+3kW
220V
220V
50Hz
50Hz
45X49X23cm
87X49X23cm
35.2lb 37.4lb
70.4lb 74.8lb
. Operating Instruction?
Before operation, check if the voltage of power supply is in conformity with the marked
voltage and if the user's power switch and fuse are suitable for the required power of this
appliance. The enclosure of the appliance shall beproperly earthed. The appliance shall
be placed horizontally and firmly. No combustible or explosive material can be placed in
its vicinity. The operation space shall have good ventilation, with the ambient
temperature not higher than 50ã. To maintain a long lifetime of the appliance and
safety of people and the appliance itself, do NOT let the heating panel operate when

the panel is dry.
1. Plug the power supply cord into the outlet.
2. Adjust the temperature control knob to the suitable position, and the machine can
begin heating as soon as the power indicator is glowing.
3. When preheated up to the determined temperature, crepe machine & griller can
start to fry.
. Circuit Diagram?
JB35 JB35A JB35-2
EH?Heat HL1-2?Indication Light ST?Temperature contoler
SA?Main Switch SM?Limiter
. Note
1. The power supply must be grounded properly.
2. The machine must preheat for about 10 minutes if the machine is cool.
3. When the machine is preheating, don’t touch the tray and the surface in order to avoid
injury.
4. Be careful not to scratch the surface of the tray, otherwise it will have an effect on
frying.
5. After use, the cleaning work of trays and the body will be on after the machine is
cooled.

Warnings?
The appliance shall not be cleaned with a water jet! As water is conductive, ingress of
water may cause electric shock.
If the power cord is broken or worn, stop operation immediately, and change the
power cord with a new one of the same specifications, or contact the supplier.
When operating, keep your hands dry! Always make sure that your hands are dry and
insulated from the power switch, connector, temperature controller etc.

General Safety Practices
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance.
The machine has to be delivered to the operator in perfect conditions of use by
the Distributor to the user. The user shall operate the machine only after being well
acquainted with the safety procedures described in the present manual. READ THIS
MANUAL WITH ATTENTION.
Basic Operation Practices
Dangerous parts
Some parts of the electric devices are connected to high voltage points.
These parts when touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buttons, switches and knobs with wet hands, wet
clothes and/or shoes. By not following these instructions operator could be exposed to
severe electrical shocks or even to a fatal situation.
Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make
sure the Switch is easy to be reached when necessary. Before any kind of maintenance,
physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure
the command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be given
for each operation step. Every step of the operation shall be taken only if the sign has
been made and responded.
Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components
of the machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the machine. If any
label has been removed or is no longer legible, contact your nearest dealer for
replacement.
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS section is not applicable to
your product, please disregard it.

SAFETY PROCEDURES AND NOTES BEFORE SWITCHING ON
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON.
Be sure to be familiar with the instructions and that you have well understood all
information contained in this manual. If you have any question contact your
supervisor or your nearest Dealer.
Danger
An electric cable or electric wire with damaged jacket or bad insulation could
cause electrical shocks as well as electrical leak. Before use, check conditions of all
wires and cables.
Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood.
Every function and operational procedure have to be very clear to the operator.
Contact your nearest Dealer for further questions.
Any manual command (switch, button or lever) shall be given only after being
sure it is the correct one.
Precautions
The electric cable has to be compatible with the power required by the machine.
Cables touching the floor or close to the machine need to be protected against short
circuits.
AFTER THE WORK ENDS
Cares
Always clean the machine, to do the cleaning SWITCH IT OFF, AND TAKE OUT
THE PLUG FROM THE ELECTRICITY SUPPLY SOCKET .
Never clean the machine BEFORE IT IS COMPLETELY STOPED.
Fit all the machine components in their due places, before switching it on again.
MAINTENANCE
Dangers
Any maintenance is dangerous if made with the machine switched on.
SWITCH IT OFF AND TAKE OUT THE PLUG FROM THE SOCKET, DURING ALL
THE MAINTENANCE OPERATION.
IMPORTANT
In any emergency situation, always take the plug out of its socket.
ADVICES
lect ical or mechani a ma nt nance s all be m de y qua ified persons.
E r c l i e h ab l
T e p rson in charge f hma ntenance per o m nces h ll check h ma hin wo ks
h e o tei f r a s a t e c e r
u d r TOT L SAFE Y CO DITION .
n e A T N S

SKYFOOD EQUIPMENT LLC - SERVICE
For questions or assistance, call SKYFOOD EQUIPMENT Toll Free: 1-800-503-7534, or
visit the Customer Service section at www.skyfood.us.
SKYFOOD’S LIMITED WARRANTY
Un less otherwise specified,new FLEETWOOD by SKYMSEN and SKYMSEN products,
excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. (“SKYFOOD”), for use only
in the continental United States (collectively, “Products” or singularly, “Product”), a re
warran ted to be free from defects in materials an d workmanship for a period of one (1)
yea r from the date of purchase by the original purchaser/user (“End User”), or eighteen
(18) months from the date of shipment from SKYFOOD’s warehouse, whichever expires
first. Several new products and accessories may be warr anted for a p eriod other than one
(1) year whil e others may be subject to travel limitations, as spe cified on the products
Instruction Manual. Proof of purchase must be presented; if not this warranty will be
VOID. No warranty is given or imp lie d to a subsequent transferee or any other third party.
Thi s warranty is expressly conditional up on SKYFOOD being notified of any defects in
materials or workmanship within five (5) days of its occurrence, within the warranted time
period. If a n otice of a claim under this warranty is timely made by the End User,
SKYFO OD or a SKYFOOD’s design ated service company (“Service Company”), will repair
or replace the Product, at SKYFOOD’s discretion, subject to the additional conditions
hereinafter described.
Thi s warranty shall not apply if damage occurs from improper installation or maintenance
performed b y an unauthorized service company (“Service Company”), wrong voltage, nor
to the extent that Products or parts have been used other than in conformance with
operating and maintenance instructions, subjected to misuse or abuse or damaged by
accident, acts of God, abnormal use, stress or any other matter unrelate d to SKYFOOD,
and beyond its reasonable control. This w arranty does NOT cover s ervice labor and
tra ve l to perform adjustments on products and/or accessories. In addition to wear and
tear of certain items, such as, but not limited to; glass parts, blades, stones, ch opper
cutting knives, plates, slicing knives, cutting disc, gaskets, oil changes, sealing tape, heat
seal wires, worm gears, self-lubricating bushings, carbon brushes for electric motors, and
other parts exp endable by nature and that nee d to be replaced frequently. Electrical
components are subject to na tural wear and tear, and are NOT covered by this
warranty. THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR
IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. Under no circumstances shall SKYFOOD be
liable for loss of use, revenue o r profit or for incidental or consequential damages.
SKYFO OD shall un der no circumstances be liable for any loss, damage, concealed
damage, expense or dela y of goods for any reason when said goods are in the custod y,
possession or con trol of third parties selected by SKYFOOD to forward, e nter, clear,
transport, or ren der other services with respect to such goods. The sole and exclusive
remedy for breach of any warranty is limited to the remedies provided in the paragraph
above.
All products held at non-commercial facilities or domiciles, mu st be taken or shipped,
shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated
service company ("Service Company"). Products held at commercial facilities and weighing
This product will be replaced or repaired under warranty, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user (“End User”), or
eighteen (18) months from the date of shipment from SKYFOOD’s warehouse,
whichever expires first.
Accessories will be re placed or repaired under warranty, for a period of (30) days,
beginning from the date of purchase by the original purchaser/user (“En d User”), or
eighteen (18) months from the date of shipment from SKYFOOD’s wa rehouse, whichever
expire s first.
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIPMENT, LLC, within thirty
(30) days from the date of purchase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD’s website www.skyfood.us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SK YFOOD
according to the instructions p osted on the referred website. Failure to do so will VOID
the warranty.
No extended warranties for third party products. There are no other express
warranties or conditions othe r than the one offered by each manufacturer for
products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and
SKY MSEN brand.
For questions or assistance, do not return the product or accessories to the store, please
call Toll Free 1-800-503-7534, or visit the Customer Service section at www.skyfood.us.
For faster service please have the items name, serial number, and proof of purchase for
the operator to assist you.
SKY FOOD reserves the right to change the term s of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The end
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on January 14th, 2014.