Soundoff Signal NEXUS nFORCE User manual

1.800.338.7337 / www.soundo󰀨signal.com
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundO Signal product, visit our website at www.soundosignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundosignal.com.
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE Interior Lightbar 2021-2022 Dodge Durango REAR 0921
Interior Rear Lightbar
!
WARNING
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range.
INTRODUCTION:
Design highlights for 2021-2022 Dodge Durango
nFORCE Lightbar for Rear Interior:
• 6 module, full shroud design
• Improved wire management incorporated into the
design
• Top cover incorporated into this rear interior
lightbar design, for improved look and Installation
• Smoothpowdercoatnishtoblendinwith
vehicle interior
•HIGHCURRENTinterconnectsmustbeproperlyterminated.Poorcrimpqualitycancauseheat
build-upandre.Followcrimpconnectormanufacturerinstructions.
•DONOTinstallthisproductorrouteanywiresintheAirBagDeploymentZone.Refertovehicle
Owner’sManualfordeploymentzones.
•DoNOTusesystemtodisconnectheadlights,brakelightsorothersafetyequipment.
•Unitmaybecomehottotouchduringnormaloperation.
•Failuretoproperlyinstallconnectors,fusesorwiringmaycausevehiclefailureorre.
•Installationmustonlybeperformedbytrainedtechnician.Installermustdeterminevehiclewiring
congurationandproperintegrationofsystem.
•Useproperwiregauge.Allpowerwiresconnectingtopositive(+)ornegative(-)batteryterminal
orlocalchassisground(-)mustbesizedtosupplyatleast125%ofmax.currentandproperlyfusedat
powersource.
•Installprotectivegrommetswhenroutingwirethroughrewallormetal.
WARNING
NEXUS TECHNOLOGY
Dodge Durango (2021-2022)
CONTENTS
QTY COMPONENT
1SHROUD
31/4"-20x3"SELFDRILLINGSCREW
3PLASTICSTANDOFF
1THINTRIM
1DRILLTEMPLATES
1PRODUCTWARNINGCARD
1INSTALLATIONSHEET
1CAPROP65CARD

1.800.338.7337 / www.soundo󰀨signal.com
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundO Signal product, visit our website at www.soundosignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundosignal.com.
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE Interior Lightbar 2021-2022 Dodge Durango REAR 0921
INSTALLATION:
1.OpenrearhatchoftheDodgeDurango.
2.Attachtheprovideddrilltemplatetotheinteriortrim
of the vehicle using non-marking tape, as shown in
Fig.1.Alignthedrilltemplatewiththestraightedge
of the interior trim and use the curved edge to help
centrallypositionthetemplate.Measureside-to-
side to ensure that the drill template is centered on
thereartrim.
3.Installtheprovidedthintrimmaterialtotheedges
speciedinFig.2.
4.Holdthelightbarassemblyintoplace,ensuring
that all edges of the shroud are in contact with
asurface.Ensurethatthemountingholesinthe
lightbarassemblyline-upwiththedrilllocations
indicatedonthedrilltemplate.Adjustthepositionof
thedrilltemplateasneeded.
5.Removetheinteriortrimpiecebeforedrilling.
ConsultyourlocalDodgedealeronrecommended
disassemblymethod.
6.Withtheinteriortrimpieceremoved,drilloutthe
3 holes in the interior trim as indicated on the drill
template.
7.Reinstalltheinteriortrimpieceaccordingto
manufacturerspecications.
8.Whileinstallingthelightbar,feedthepowerharness
into the gap between the rear window and the
interiortrim.Withthelightbarproperlypositioned,
insert a plastic standoff into the centermost
mounting location and secure with a ¼”, 3” self-
drillingscrew.Donotovertighten.
9.Line-upthetwooutermostmountinglocations
and insert the remaining standoffs and self-drilling
screws,asshowninFig.3.Adjustasnecessary.
10.Testtoensureproperfunctionality.
Interior Rear Lightbar
Dodge Durango (2021-2022)
TRIM
TRIM
TRIM
Fig.2
PRO TIP: Before mounting the lightbar, mark
and drill pilot holes in the sheet metal for
the ¼” self-drilling screws in each of the 3
mounting locations.
3X DRILL A 15/32" HOLE
AREA HATCH SHOWS THE DRILL TEMPLATE
Fig.1
STANDOFF
SELF-DRILLING SCREW
Fig.3