Vicon Andex 714 T Vario User manual

Andex 714 T Vario
Operating manual
Original operating manual
Edition 06.2012
Date of print 07.2012
Language EN
Machine number VF69621551 –
Model VF6962
Document number VF16648685.EN

Andex 714 T Vario
Machine identification
In order for your dealer to assist you as efficiently as possible, you will need to provide some information about
your machine. Please enter the details here.
Designation
Working width
Weight
Machine
number
Accessories
Supplier's
address
Manufacturer's
address Kverneland Group Kerteminde AS
Taarupstrandvej 25
DK-5300 Kerteminde
Denmark
Tel: [phone]
7.10 m
1400 kg
VF6962_ _ _ _
Copyright by Kverneland Group Gottmadingen N. V., Germany. Reproduction, transfer to other media, translation or the use of extracts or parts
of this manual without the explicit permission of Kverneland, is not permitted. All rights reserved. The contents of this operating manual are subject
to change without notice. The right to technical revision is reserved.

Table of contents
3
Table of contents
Preface ....................................................... 5
Target group for this operating manual 5
Symbols used 6
Safety ......................................................... 7
For your safety 7
Who is allowed to operate the machine? 11
General safety information 11
Coupling 14
Hydraulics 14
Road transport 15
Operation 17
Uncoupling 18
Care and maintenance 19
Further regulations 20
Getting to know the machine .................. 21
Range of application 21
Features 21
Designation of components 22
Technical specifications 23
Pilotbox 26
Delivery and assembly ............................. 27
Checking the scope of delivery 27
PTO shaft length 28
Coupling the machine .............................. 31
Safety 31
General 31
Coupling the machine 32
Adjusting the drawbar cylinder 35
Coupling the PTO shaft 36
Wheel chocks 36
Connecting the electrics 37
Connecting the hydraulics 38
Preparing for use ...................................... 40
Safety 40
General 40
Rotor pitch 41
Working depth 42
Adjusting the support wheel 44
Adjusting the contact rollers [+] 44
Road transport .......................................... 46
Safety 46
General 47
Folding the machine into the
transport position 47
Checking the machine 53
Preparations on the field ......................... 54
Safety 54
General 54
Swath deposit 55
Single swath 56
Basic settings 61
Fitting the deflector bars 62
Pulling out the deflector bar 62
Rear swath former 63
Additional swath former [+] 64
Operation ................................................... 66
Safety 66
General 67
Swathing 68
Driving on headlands 69
Cleaning and care ..................................... 70
Safety 70
Cleaning 71
Care 71
Parking and storage .................................. 72
Safety 72
General 72
Uncoupling the machine 73
After the end of the season 74
Maintenance ............................................... 75
Safety 75
General 77
Screwed connections 79
Lubrication points for grease 81
Lubricating the PTO shafts 82
Filling quantities 83
Tyres 83
Hydraulics 84
Additional equipment ................................ 85
Optional accessories 85
Fault elimination ........................................ 87
Faults 87
Circuit diagrams ........................................ 89
Hydraulic system connection diagram 89
Pilotbox circuit diagram 90
Lighting circuit diagram 91
Decommissioning ..................................... 92
Environment 92
EC Declaration of Conformity .................. 93
Conforms to
EC Directive
2006/42/EC 93
Index ........................................................... 95

Table of contents
4

Preface
5
Preface
Target group for
this operating
manual
This operating manual is intended for trained agriculturists and
persons who are otherwise qualified for agricultural activities and have
received instruction in working with this machine.
Minimum age
Children under the age of 16 are not permitted to operate the machine.
For your safety
You must familiarise yourself with the contents of this operating
manual before assembly or initial operation of the machine. In this
way, you will achieve optimum work results and operational safety.
The operating manual forms an integral part of the machine and must
always be kept to hand. This will ensure that you:
•avoid accidents.
•comply with warranty conditions.
•have a fully functional machine in good working order at all times.
Training
Your will receive training from your dealer concerning using the
controls and care of the machine.
Information for the employer
All personnel are to be regularly, but at least once a year, instructed
on the use of the machine, in accordance with the regulations of the
national organisation for Health and Safety at Work. Untrained or
unauthorised persons are not permitted to use the machine.
You are responsible for ensuring that the machine is operated and
maintained safely. Make sure that you and all other persons that
operate, maintain or work in close proximity with the machine are
familiar with the operating and maintenance regulations, as well as the
corresponding safety instructions in this operating manual.