Xtool Nitro LT User manual

QUICK START
Nitro diagnostic system
GUIDE
WWW.NITROSCANTOOL.COM
Nitro LT
Nitro XT
Nitro GT

3
NITRO SCAN TOOL
Declaration
1. This manual is designed for the use of Nitro scan tools.
No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any form
or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior
written permission of XToolUSA®.
2. This scan tool unit is designed for professional vehicle technicians. XToolUSA®, the
manufacturer, or any subsidiaries and authorized distributors (hereafter XToolUSA®) is not
responsible for vehicle damage and loss caused by customer technical problems, vehicle
problems or other factors including improper use of the tool.
3. Use the device only as described in this manual. The user will be solely responsible for any
damages caused by misuse of the scan tool. XToolUSA®will not bear legal responsibility for
incorrect use of the tool.
4. XToolUSA®shall not be liable for any incidental or consequential damages or any economic
consequential damages arising from the accidents of individual users and the third parties,
misuse or abuse of the device, unauthorized changes to or repairing of the device, or failure
made by the user not using the product according to the manual.
5. All information, specications and illustrations in this manual are based on the latest
congurations and functions available at the time of printing. XToolUSA®reserves the right to
make changes at any time without notice.
7. In countries where the trademarks, service marks, domain names, logos and the name of
the company are not registered, XToolUSA®claims that it still reserves the ownership of the
unregistered trademarks, service marks, domain names, logos and the company name. All other
marks for the other products and the company’s name mentioned in the manual still belong
to the original registered company. You may not use the trademarks, service marks, domain
names, logos and company name of XToolUSA®or other companies mentioned without written
permission from the trademark holder.
8. Please visit www.nitroscantool.com for more information about Nitro Scan Tools.
9. XToolUSA® reserves the right for the nal interpretation of this manual content.

4
NITRO SCAN TOOL
FRONT VIEW
BACK VIEW
Camera Speaker
1
Serial Number and ID
3
2

5
NITRO SCAN TOOL
TOP VIEW
BOTTOM VIEW
USB3.0 interface: Wired data transmission
Mini HDMI interface: Audio and video transfer
DB15 interface: Extended reservation port
DC charging port: Device Charging
Power Button: Power on / off
Charger Interface
2 53
1
1
1
1
2
3
4
5
4

6
NITRO SCAN TOOL
Nitro XT/GT Technical Information
Operating system: Android 5.1.1
Processor: quad core processor 1.8GHz
Memory: 4GB RAM, 64G ROM
Display/Touch screen: 1280 x 800 resolution 10.1 LED
Camera: 8 megapixel with autofocus and ashlight
Interface: USB 3.0, DC charging port, MINI HDMI, DB15 interface.
Battery: 13000 mAh Lithium Polymer battery
Input voltage: 12V DC
Working temperature: -20°c to 50°c (-4°F to 126°F)
Relative humidity: 90%
Appearance size: 311×189×36 (mm)
Nitro LT Technical Information
Operating System: Android 5.1.1
Processor: Quad core processor 1.8GHz Memory: 2GB RAM, 32GB ROM
Display / touch screen: 1024*768 resolution, 8-inch LED touch screen
Camera: 8 megapixels, with ash and autofocus.
Sensor: accelerometer
Audio input / output: microphone/speaker.
Interface: USB3.0, DC charging port, MINI HDMI, DB15 interface.
Battery: 10000mAh 3.7V lithium polymer battery
Input voltage: +9~+12V DC
Working temperature: -20°c to 50°c (-4°F to 126°F)
Relative humidity: <90%

7
NITRO SCAN TOOL
Diagnosis - Read vehicle
diagnostic information, view
and record live data, read and
clear codes
Pre-Scan -
Generate Pre-Scan report
NITRO SCAN TOOL
Functional Buttons Functional Descriptions
continued on next page...

8
NITRO SCAN TOOL
Post Scan -
Generate Post Scan Report
Report Manager
One-Click Update -
Upgrade software
Remote Control -
XToolUSA support center
Accessories -
Flashlight and Demo
Settings -
Change machine settings for
language and units
Internet -
Web Browser
Functional Buttons Functional Descriptions
continued from previous page...
continued on next page...

9
NITRO SCAN TOOL
Return to the previous screen
Decrease the volume
Increase the volume
Home button
Page History
Screenshot
Bluetooth, turns blue when
connected
Click to record data
Functional Buttons Functional Descriptions
continued from previous page...

10
NITRO SCAN TOOL
Quick Start
Note: You must complete these steps to update and begin using the Nitro.
Charge the Machine
Connect the power supply and charge the machine until the battery is fully charged.
WIFI
Press the settings button and then select WIFI networks. Enter your wireless info and password.
You are now connected to the internet.
Update
From the main screen, press the update button. From the Update screen press update all.
Once the updates are downloaded, the scan tool is ready to use.

11
NITRO SCAN TOOL
Connection LT
The Nitro LT machine is connected to the vehicle through the OBDII main cable to the DLC as shown
in this diagram.
1. Nitro LT Tablet
2. OBD Cable
3. Vehicle
4. OBDII adapter (use correct adapter for OBD1 vehicles)
Connection XT and GT
The Nitro XT and GT connect to the 16 pin DLC OBDII port through a Bluetooth connection. Connect
the VCI box as shown in this diagram. Turn ignition key on and wait ve seconds for connection to
the scan tool. You are now ready to begin your vehicle diagnostics.
1
2
3
4
1
2
3
4

12
NITRO SCAN TOOL
Remote Control
If the scan tool user has encountered problems during the repair process, you can open
this application for remote assistance and accept support from the XtoolUSA Tech-Support
Center. This system can also be used by other Nitro users to help the requestor with
diagnostics.
1. Click the remote button on the home screen.
2. Click the remote-control icon to generate and display the device ID
3. Click the Send My ID button.
4. The system will pop up a window and that allows the other party to have remote control
of your machine.
** please do not operate the scan tool during the time it is being remote controlled.

13
NITRO SCAN TOOL
Warranty
LIMITED MANUFACTURER’S WARRANTY
XtoolUSA® warrants the Nitro Scan Tools™ in compliance with this certicate, in effect for 24 months from the date of
purchase. In order to redeem the benets provided to you by this warranty, this documentation must be provided in
tandem with a veriable proof of purchase, as issued by an authorized Nitro Scan Tool™ distributor. This warranty
covers the free repair or replacement of any parts deemed faulty as a result of manufacturing defects. (For the most current
version of this agreement, please visit Nitroscantool.com/warranty).
This warranty does not cover:
(1) Damage or malfunctions caused by natural disasters or acts of God (lightning, re, ood, earthquakes and other
external causes)
(2) Theft, misplacement, reckless, abusive, willful or intentional conduct associated with handling and use of the
Nitro Scan Tool™
(3) Faulty installation, repair, or maintenance by anyone other than a Nitro Scan Tool™ authorized service provider
(4) Damage to or failure of unauthorized aftermarket upgrades or add-on accessories.
(5) Consumer replaceable or consumable items, including but not limited to: cords, adapters and AC power adapter.
(6) Extreme environmental conditions (including extreme temperature or humidity) leading to problems such as
external condensation, overheating and mold
(7) Usage outside of the permitted or intended uses, as described by the manufacturer
(8) Malfunctions caused by improper operation by machine operator
(9) Damage caused by insect infestation or rodents
(10) Any machine whose serial number has been altered, defaced or removed
(10) Any machine whose software has been modied or altered beyond the normal scope of use
(11) Damage that is secondary, or any damage that would be ordinarily covered under a primary insurance policy
(e.g., car accident causes damage to the Nitro Scan Tool™)
(12) Protection against any other act or result not covered by this plan
(13) Any resultant damage to the Nitro Scan Tool™ that arises from one or more conditions described above
Except for the above cases, all qualifying malfunctions are eligible for free service within the warranty period. To assure your
request for service is handled efciently, please contact XtoolUSA®customer service prior to sending us any product. We will
issue you a Repair Authorization Form that must be included when shipping your product to us. Failure to do so will result
in service delays.
Shipping and Handling Policy: XtoolUSA®will contribute to the cost of shipping to and from our repair center, at our
discretion, and only within the Continental United States. After preliminary assessment, if your machine malfunction is
determined as uncoverable by this warranty, the entirety of all shipping costs will become your obligation. Failure to rectify
any outstanding shipping or repair charges will result in return shipping delays.
continued on next page...

14
NITRO SCAN TOOL
How to Obtain Service and Support
You may obtain service by accessing our website, www.nitroscantool.com/support or by calling us at [phone] ext.
4005. Regular business hours are Monday through Friday 8am to 5pm Pacic Standard Time.
To receive service or support, you agree to comply with each of the terms listed below:
(i) You will provide a copy of this warranty and a copy of your purchase, exchange and service receipts, if requested
(ii) You will provide, to the best of your ability, information about the symptoms and causes of your issues with the
Nitro Scan Tool™
(iii) You will respond to requests for information, including but not limited to: your product serial number, version of
the software installed, any peripheral devices connected or installed on the Nitro Scan Tool™ , any error messages
displayed, the actions which were taken before the Nitro Scan Tool™ experienced the issue and the steps taken
to attempt resolution of the issue
(iv) You will follow instructions we give you, including but not limited to refraining from sending us products and
accessories that are not subject to repair or replacement service (as listed above) and packing the Nitro Scan Tool™
in accordance with the shipping instructions we will provide to you upon service agreement
(v) Keep your original packaging! In the event your machine must be shipped to our repair facility, there is
no safer method to ensure that the machine will arrive intact and undamaged, than if it ships in its original box.
Damages incurred during shipping, due to improper packaging, will be the customer’s sole responsibility
(vi) You will be required to sign a service order disclaimer or other service order terms to obtain repairs or a replacement
device. This service order disclaimer or other service order terms do not form a part of this warranty, and are a
separate legal document
(vii) After securing permission to send in your machine, please insert your completed Repair Authorization Form inside
the box and ship to:
XtoolUSA Warranty and Repair Center - 2895 W. Capovilla Ave. Suite 100B, Las Vegas, NV 89119
THE LIMITED MANUFACTURER’S WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED
IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY. XTOOLUSA®SHALL HAVE NO LIABILITY FOR INCIDENTAL AND
CONSEQUENTIAL DAMAGES THAT ARISE FROM THE SALE OF XTOOLUSA®PRODUCTS OR ARE A RESULT OF A BREACH
OF THE LIMITED MANUFACTURER’S WARRANTY REPRODUCED ABOVE. THE REMEDIES SET FORTH IN THE LIMITED
MANUFACTURER’S WARRANTY ARE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDIES, AND THE ENTIRE LIABILITY
OF XTOOLUSA®FOR ANY BREACH OF THE LIMITED MANUFACTURER’S WARRANTY. SOME STATES/JURISDICTIONS DO
NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS, AND EXCLUSIONS DESCRIBED ABOVE, AND AS A RESULT, THEY
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH MAY VARY FROM STATE TO STATE OR FROM ONE JURISDICTION TO ANOTHER. NO DISTRIBUTOR,
DEALER, SALES REPRESENTATIVE NOR ANY OTHER PERSON HAS BEEN AUTHORIZED TO MAKE ANY AFFIRMATION,
REPRESENTATION OR WARRANTY REGARDING THE PRODUCT, OTHER THAN THOSE CONTAINED IN THIS LIMITED
MANUFACTURER’S WARRANTY, AND IF MADE, SHALL NOT BE ENFORCEABLE AGAINST XTOOLUSA®. XTOOLUSA®
RESERVES THE RIGHT TO MODIFY THESE TERMS AND CONDITIONS AT ANY TIME, IT BEING UNDERSTOOD THAT
SUCH MODIFICATION WILL NOT ALTER THE LIMITED MANUFACTURER’S WARRANTY CONDITIONS APPLICABLE TO THE
PRODUCTS SOLD WHILE THESE TERMS AND CONDITIONS ARE IN EFFECT.
continued from previous page...

2895 W Capovilla Ave, Suite 100B
Las Vegas, NV 89119
Service Hotline: [phone]
Email: [e-mail]
Website: www.Nitroscantool.com
Contact
Be sure to visit our web page at www.nitroscantool.com for
video, tech tips and other great helpful information on using
your new tool. Telephone tech service is available for Nitro
users with valid up to date subscriptions at 888-988-6865.
This service is free if your tool is up to date.
Please join our Facebook user group page www.facebook.
com/Nitro-Scan-Tool-Users-Group. This is a user focused
group of Nitro owners sharing helpful tips on getting the
most from your Nitro scan tool.