Xtool D9 Pro User manual

Shenzhen Xtooltech Intelligent Co., LTD
USER MANUAL
D9 Pro Smart Diagnosis System

I
Please read this user manual carefully before using the D9 Pro Smart
Diagnosis System. When reading the manual, please pay attention to the
words “Note” or “Caution” and read them carefully for appropriate
operation.
TRADEMARKS
is a registered trademark of Shenzhen Xtooltech Intelligent CO.,
LTD. In countries that the trademarks, service marks, domain names, logos,
and the name of the company are not registered, Xtool claims that it still
reserves the ownership of the unregistered trademarks, service marks,
domain names, logos, and the company name. All other marks for the
other products and the company’s name mentioned in the manual still
belong to the original registered company.
You may not use the trademarks, service marks, domain names, logo, and
company name of Xtool or other companies mentioned without written
permission from the trademark holder.
Xtool reserves the right to the final interpretation of this manual content.
COPYRIGHT
Without the written consent of Shenzhen Xtooltech Intelligent Co., Ltd.,
any company or individual shall not copy or backup this operation manual
in any form (electronic, mechanical, photocopying, recording, or other
forms).

II
DECLARATION
This manual is designed for the usage of the D9 PRO Smart Diagnosis
System and provides operating instructions and product descriptions for
users of the D9 PRO Smart Diagnosis System.
No part of this manual can be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the prior written
permission of Xtool.
Use the device only as described in this manual. Xtool is not responsible
for any consequences of violating the laws and regulations caused by
using the product or its data information
Xtool shall not be liable for any incidental or consequential damages or
for any economic consequential damages arising from the accidents of
individual users and the third parties, misuse or abuse of the device,
unauthorized change or repair of the device, or the failure made by the
user not to use the product according to the manual.
All information, specifications, and illustrations in this manual are based
on the latest configurations and functions available at the time of printing.
Xtool reserves the right to make changes at any time without notice.
OPERATION INSTRUCTIONS
For safe operation, please follow the instructions below:

III
⚫Keep the device away from heat or fumes when you are using it.
⚫If the vehicle battery contains acid, please keep your hands and skin
or fire sources away from the battery during testing.
⚫The exhaust gas of the vehicle contains harmful chemicals, please
ensure adequate ventilation.
⚫Do not touch the cooling system components or exhaust manifolds
when the engine is running due to the high temperatures reached.
⚫Make sure the car is securely parked, Neutral is selected or the selector
is at P or N position to prevent the vehicle from moving when the
engine starts.
⚫Make sure the (DLC) diagnostic link connector is functioning properly
before starting the test to avoid damage to the Diagnostic Tablet.
⚫Do not switch off the power or unplug the connectors during testing,
otherwise, you may damage the ECU and/or the Diagnostic Tablet.
CAUTIONS!
⚫Avoid shaking or dismantling the unit as it may damage the internal
components.
⚫Do not use hard or sharp objects to touch the LCD screen;
⚫Do not use excessive force;
⚫Do not expose the screen to strong sunlight for a long period.
⚫Please keep it away from water, moisture, high temperature, or very
low temperature.

IV
⚫If necessary, calibrate the screen before testing to ensure the accuracy
of LCD performance.
⚫Keep the main unit away from strong magnetic fields.
⚫Please keep your device always connected to the Internet. When the
device is off the Internet for 30 days, The diagnosis APP may be locked
and you need to synchronize data with the Internet to activate it.
AFTERSALES-SERVICES
E-Mail: [e-mail]
Tel: [phone] or [phone] (China)
Official Website: www.xtooltech.com
Please provide your device serial number, VIN code, vehicle model, software version,
and other details when seeking technical support. If there are screenshots or videos, it will
better help us locate your problem.

V
Content
TRADEMARKS .................................................................................................I
COPYRIGHT .......................................................................................................I
DECLARATION.................................................................................................II
OPERATION INSTRUCTIONS......................................................................II
CAUTIONS!...................................................................................................... III
AFTERSALES-SERVICES........................................................................... IV
1GENERAL INTRODUCTION .................................................................1
Tablet ................................................................................................................................. 2
Front View of Tablet...........................................................................................................................................2
Back View of Tablet ...........................................................................................................................................3
Host Ports...............................................................................................................................................................4
VCI box.............................................................................................................................. 5
Front/Back View of VCI BOX .........................................................................................................................5
Top/Bottom View of VCI BOX........................................................................................................................6
Technical Specifications............................................................................................. 7
Packing Kit....................................................................................................................... 8
2GETTING STARTED ............................................................................ 10
Main Interface................................................................................................................ 10
Operation System .............................................................................................................................................12
Main Menu ...........................................................................................................................................................16
Function Buttons ...............................................................................................................................................17
Navigation Buttons ...........................................................................................................................................18
Notification Bar...................................................................................................................................................19

VI
Activation Guide ............................................................................ 错误!未定义书签。
3UPDATE................................................................................................... 25
4DIAGNOSIS ............................................................................................ 27
Vehicle Connection..................................................................................................... 27
Vehicle Selection ......................................................................................................... 29
Basic Diagnosis Functions ...................................................................................... 34
ECU Coding & Programming ..................................................................................... 45
5SPECIAL FUNCTIONS ........................................................................ 49
Oil Reset ........................................................................................... 错误!未定义书签。
EPB..................................................................................................... 错误!未定义书签。
SAS..................................................................................................... 错误!未定义书签。
DPF ..................................................................................................... 错误!未定义书签。
BMS Reset........................................................................................ 错误!未定义书签。
Throttle.............................................................................................. 错误!未定义书签。
TPMS Reset ..................................................................................... 错误!未定义书签。
ABS Bleeding.................................................................................. 错误!未定义书签。
Injector Coding............................................................................... 错误!未定义书签。
Gearbox Match ............................................................................... 错误!未定义书签。
Suspension...................................................................................... 错误!未定义书签。
Windows Initialization .................................................................. 错误!未定义书签。
Seat Calibration.............................................................................. 错误!未定义书签。
Headlight........................................................................................... 错误!未定义书签。
ECU Configuration ........................................................................ 错误!未定义书签。

VII
6REPORT .................................................................................................. 50
Report ................................................................................................ 错误!未定义书签。
Replay................................................................................................ 错误!未定义书签。
File Manager .................................................................................... 错误!未定义书签。
7SETTINGS............................................................................................... 87
Language........................................................................................................................ 88
Units ................................................................................................................................. 89
Bluetooth ........................................................................................................................ 90
My Workshop Info ....................................................................................................... 90
VCI Information............................................................................................................. 91
About ............................................................................................................................... 92
8REMOTE ASSISTANCE...................................................................... 93
SHENZHEN XTOOLTECH INTELLIGENT CO., LTD......................... 104

1
1 GENERAL INTRODUCTION
The D9 PRO smart diagnosis system is an advanced scanning tool based
on the Android operating system. It supports multi-language switching
and is suitable for different countries and regions.
The advantage of this scanner is not only its comprehensive functions,
including complete system diagnosis, full OBDⅡfunctions, various reset
functions can also achieve a faster and more accurate diagnosis.
The D9 PRO Smart diagnosis system mainly includes:
⚫Tablet
⚫VCI box
⚫Main test cable
⚫Connectors
⚫Power adapter
Before performing the diagnosis program, please make sure that the VCI
box is successfully connected to your vehicle, and connect the VCI box
with Bluetooth on the tablet.
Some old cars with non-OBD2 standard protocol need to be connected
with our VCI box through specific pin connectors.
Using the wrong connector may cause your car to be unrecognized by
the diagnostic tool.
Please confirm the OBD connector specifications configured on your car
before connecting.

2
TABLET OVERVIEW
The main unit of the D9 PRO Smart Diagnosis System is the tablet. It allows
you to operate all diagnosis functions, and it can also work as a normal
Android tablet.
FRONT VIEW OF TABLET
Figure 1-1 Sample of Tablet Front View
The front of the tablet is mainly a touchable display screen, you can use
your fingers to operate on the screen to finish most of the diagnosis
process.

3
BACK VIEW OF TABLET
Figure 1-2 Sample of Tablet Back View
①Camera: Used for taking pictures.
②Tablet Holder: Used to support the tablet, hold the tablet on the
steering wheel or adjust the tablet height as needed.
③Nameplate: Show the basic information about the tablet such as
product name and serial number, etc.
④Loudspeaker: It supports external sound playback.
③
①
④
②

4
HOST PORTS
Figure 1-3 Sample of Tablet Host Ports
①DOIP port: Supports ECU programming for vehicles with DOIP
protocol
②USB 3.0 port: Used for data transfer for tablet & PC communication,
and data transfer with VCI box when working.
③VGA port: A reserved interface can be used for charging.
④DC charging port: Charging port, connected to the power adapter
to charge the device.
⑤Power button: Long press to turn the device on/off, short press to
switch the device into sleep mode. Hold for about 20 seconds to
force shut down the device.
①
②
③
④
⑤

5
VCI BOX
To communicate with the vehicle via OBD, D9 PRO also comes up with a
VCI box. The tablet needs a Bluetooth connection with the VCI box to get
access to all software.
Although some functions (like EEPROM Adapter) will not need you to communicate to
the vehicle, please power up the VCI box using a 12V power adapter to get access to the
software.
FRONT/BACK VIEW
Front Back
Figure 1-4 Sample of VCI Box, screen 1
①Display Screen: Show status of the VCI box-like battery voltage,
Bluetooth connection, and car communication status.
②Nameplate: Show basic information about the VCI box, like the serial
number.
Make sure that you’re using the VCI box that is paired with the tablet, or it will not
communicate. The serial number of the VCI box must be the same as the serial number
of the tablet.
①
②

6
TOP/BOTTOM VIEW
Top Bottom
Figure 1-5 Sample of VCI Box, screen 2
①DB15 Port: Used to connect the VCI box to the OBDII port on the
vehicle.
②USB-B Port: Used to connect the VCI box to the tablet using USB-B
to USB3.0 cable
①
②

7
TECHNICAL SPECIFICATIONS
Table 1-1 Specification
Item
Description
OS
Android 5.1
Processor
Quad-core processor 1.8GHz
Ram
2G
Rom
64G
Display
9.7-inch capacitive, 1024×768 resolution
Connectivity
⚫USB
⚫Wi-Fi
⚫Bluetooth
Camera
8-megapixel autofocus rear camera with
flash
Sensor
Gravity sensor
Audio Input/ Audio
Output
Microphone/ Loudspeaker
Ports
⚫USB3.0
⚫DC charging port
⚫VGA port
⚫DOIP port
Battery
10000mAh 3.7V lithium polymer battery
Input Voltage
12V DC
Operating
Temperature
-10~50℃
Relative Humidity
< 90%
Dimensions
315.07×218.35×34.61 mm

8
PACKING KIT
Table 1-2 Packing List
Category
No.
Name
QTY
Test connector
1
HONDA-3
1
2
TOYOTA-17
1
3
BMW-20
1
4
KIA-20
1
5
MAZDA-17R
1
6
NISSAN-14
1
7
GM/DAEWOO-12
1
8
SUZUKI-3
1
9
FIAT-3
1
10
HYUNDAI/KIA-10
1
11
AUDI-4
1
12
MITSUBISHI-12+16
1
13
UNIVERSAL-3
1
14
CITROEN-2
1
15
BENZ-38
1
16
BENZ-14
1
17
SELFTEST
1
18
OBD II-16
1
19
DB15 Main Cable
1
20
Battery Cable
1
21
Cigar Lighter Cable
1
Host group
1
Tablet PC
1
2
VCI Box
1
3
USB3.0 To Type_B Main Cable
1
4
Charger for Tablet
1
5
Power Cable US
1

9
6
Power Cable EU
1
7
USB3.0 Data Cable (Connect to
PC)
1
Accessories
1
Color Carton
1
2
Packing List
1
3
Certificate of Quality
1
4
Tool Case
1
5
Desiccant
4
6
User Manual
1

10
2 GETTING STARTED
ACTIVATION
After first-time users press and hold the power button to turn on the
system, the system will automatically enter the guide process and request
to select the language for the operating system.
Figure 2-1 Sample of Selection Languages
After setting the system language, you will enter the activation page, as
shown in the figure below. You can also click the "Trial" button in the
upper right corner to try it out before activation.

11
Figure 2-2 Sample of Activation (Screen 1)
Click Start Activate to enter the activation page, as shown below:
Figure 2-3 Sample of Activation (Screen 2)