Yale Conexis L1 User manual

Conexis®L1
Manual
The Secure, Keyless
Smart Door Lock
The smarter way to protect your home•

Discover
Our Range
of Products
ALARMS
CCTV
ACCESSORIES
Yale®Connected
Secure, monitor and control your
home with a range of smart
security devices from Yale.
Whether it’s a Smart Door Lock,
an Alarm or CCTV system, Yale
Smart Living products put you in
control of your home security.
HOME VIEW
CAMERAS
SMART DOOR
LOCKS
The smarter way to protect your home•

Introduction
Thank you for choosing the Yale Conexis®L1 Smart Door Lock.
This simple to install product has been designed with the user
in mind. Please read this manual completely before using the
Yale Conexis®L1 Smart Door Lock.
Contents
Installation
4
Unlock With Cards/Tags
17
Yale Lock App
18
Create Mobile Key Account
19
Adding Cards/Tags Via App
20
Unlock With Yale App
21
Locking The Conexis®L1 Smart Door Lock
22
Battery Indicator
23
Pairing With A Third Party Gateway
24
Factory Reset
25
Search for Conexis®L1 Installation
Video on You Tube
For more information on this product
and Yale Smart Living Range visit
Consumer Support:
[email protected] Tel: [phone]
The 2 year guarantee for this
2
product is active from the date
of purchase (A copy of this
guarantee is available on our
website).
Hereby, ASSA ABLOY UK Ltd declares that the Conexis®L1 Smart Door Lock is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
3

ConexisTM L1 Smart Door Lock
INSIDE
Radio Cover
Inside LED
OUTSIDE
Key Card/Tag Reader
Bluetooth Wakeup
Button and LED
Lever Handle
Lever Handle
Thumbturn
Backup 9V
Battery Cover
contacts
Tools Required
4

Inside The Box
4x AA Alkaline
Fixing Pack A
The smart way to protect your home.
Fixing Pack B Fixing Pack C Fixing Pack D
55mm
70mm
80mm
145mm
160mm
170mm
5

Remove the Current Handle•
4
3
Do not close door
until installation
is complete.
1
Please make a note of
your current fixing screws. 2
You should have 2 or 3 as
below.
Remove the cylinder
2
1
6

Measuring Your Door
Please measure the thickness of the door
and the distance between the centre of the
lock and the inside of the door to select the
correct xing pack and tailbar.
Fixing Pack B Fixing Pack C Fixing Pack D
INSIDE
55mm
70mm
80mm
145mm
160mm
170mm
Door thickness
Door thickness
Door thickness
44-50mm 58-65mm 70mm
21mm - 26mm
26mm - 31mm Short
31mm - 36mm Tailbar
36mm - 41mm
41mm - 46mm Long
46mm - 51mm Tailbar
7

Install lock Actuator•
1
2
1
2
Tip:
After installing actuator make sure it is not tilted in the door.
Please screw lug into
position to line up with
previous handle xing
screws (see page 6).
8

Fit External Handle•
Lugs can be
slid up and
down to t
current xing
holes.
3
x 2
21
Slide the lug up
or down to align
with the holes in
the door.
2
1
9

Fit Internal Fixing Plate•
2
1
No longer
required
Note
3
Tip:
Slightly
removing
the external
handle from
outside the
door can
help line up
2
the xing
screws.
Insert xing screws
to line up with
previous handle
1
Do not fully
screws.
tighten.
10

Unit Alignment•
Make sure handle is parallel
to door on both sides.
2
1
INSIDE
3
OUTSIDE
Please ensure that
alignment tool is at
against the door
as screws are
tightened.
6
4
5
11

Fitting Internal Handle•
o longer
required
1
Red
2
Red
Make sure arrows are
facing up
3
Do not turn
1
thumbturn until
installation is
complete (page 16)
2
Please make sure cable is
tucked into allocated slot
when fitting handle.
12

Installation Guide
2
1
Loosely
tighten
3
Do not turn
thumbturn until
installation is
complete (page 16)
4
2
Make sure handle
operates freely
once screws are
tightened.
1 Check seal!
Then tighten screws
3
4
13

Handing Procedure•
2
1
Alkaline
Batteries
Only
1
Hold R Button
for 15 sec.
“Beep Beep”
2
Push Down
& Release
“Beep Beep”
2
Push Up
& Release
“Beep Beep
Beep ”
Motor should lock & unlock
14

Pairing of Initial Credential•
Initial pairing mode is designed to allow you to pair 1 Card or Tag before you connect
a smartphone to your lock. Further cards or tags can be added through the app once
installation is complete.
1 Press “R”
Button to Start
“Beep Beep”
Mode
Learn
PURPLE
Success
GREEN
Timeout
RED
Place card/
tag just below
2
Yale badge
The smart way to protect your home.
or
3
“Beep”
3 Press “R”
Button to Finish
“Beep Beep Beep”
INSIDE
OUTSIDE
Please keep this card/tag on you as your backup
credential at all times when leaving the house.
15

Installation Checklist
Before shutting your door in frame, please test
the following things...
AWhile the door is open, lift the lever handle to lock.
Make sure the motor operates smoothly.
BTest to make sure the lever handle cannot be
pushed down.
CPush the thumbturn in on the inside handle and
turn 180 degrees to unlock the door.
DPush the lever handle down and make sure it
returns by itself.
E Lift the lever handle to lock again.
FTap one of the paired Cards/Tags on the outside
handle under the Yale logo. Make sure it unlocks
and the lever handle can be pushed down.
Your installation is now complete.
If you have issues with any of the above, please contact:
Consumer Support: [email protected] Tel: [phone]
16

Unlock With Cards/Tags
1
OUTSIDE
2
Green
The
smart
way
to
protect
your
home.
Green
The smart way to protect your home.
Green
Place card/tag just
below Yale badge
3
Green
17

Yale Lock App
1. Search on app store
ConexisYALE LOCKL1
®
21. Download App
YALE LOCK
LOCK
32. Create Account
LOCK
Login
E-mail
E-mail
Password
Password
Login
Password Reset
Create Account
Send Feedback
LOCK
User Registration
First name
First name
Last name
Last name
E-mail
E-mail
Password
Password
Confirm Password
Password
Questions
What time of the day were you born?
(hh:mm)
Answer
18

Create Mobile Key
1 YALE Add New
Lock
Your key ring is currently empty. A user may
send you a key using your account e-mail:
[email protected]
Or press ‘Add New Key’ and configure your
own Yale lock.
2
Add New Lock
Name your lock
A lock would typically be named by its
location or purpose.
E.g. Front Door
Cancel OK
Q W E R T
Y
U
I
O P
A S
D
F
G
H
J
K
L
Z
X
C
V
B
N
M
123
space
return
3Press “R” Button
to Start
OUTSIDE
4
Purple
te
comple
revocation
Key
Blue
INSIDE
Touch Purple light to
make it turn blue
6
5
Only one phone can be paired to lock. This phone can then share the key to other users
by tapping key & press manage users.
19

Adding Additional Cards/ Tags Via App•
Lock ‘name’
Add New Lock
Lock ‘name’
Add New Lock
Cards/Tags
Lock Menu
Details
Cards/Tags
Audit
2
Lock Name
Settings
1
Date & Time
New Card/Tag
3
Cards/Tags
Press the Bluetooth
wakeup button
Cards/Tags
5
Name
Cancel
OK
Q W E R T Y U I
O P
A S D F G H J K L
Z X C V B N M
123 space return
4
Blue
Purple
7
Cards/Tags
6
Your Card/Tag ‘name’
The smart way to protect your home.
Green
“Beep Beep”
users updated
New Card/Tag
Your initial card/tag will appear as user 1 once a card/tag has been added through the app.
20