Yealink MeetingBar A20 User manual

All-in-one Video Collaboration Bar
MeetingBar A20
English | 简体中文 | Deutsch | Français | Español
Quick Start Guide(V1.3)
Microsoft
Teams
Certied for

Yealink MeetingBar
Teams Edition
Yealink MeetingBar
Zoom Edition
For downloading the video, please go to the ofcial
website: https://support.yealink.com/

Table of Contents
English..............................................................1
简体中文 .......................................................... 7
Deutsch...........................................................13
Français...........................................................19
Español...........................................................25

1
E
N
G
L
I
S
H
Note:
• We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in reduced performance.
• Use the Yealink original adapter (48V/0.7A) to charge the endpoint only. The use of the third-party adapter
may cause the damage to the endpoint.
• Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
Package Contents
MeetingBar A20
VCR20-Teams AAA Battery×2
3m Ethernet
Cable
1.8m HDMI Cable×2
(for the display device)
Cable Tie×5 Power Adapter
×4
×2
×2
Mounting Bracket
and Accessories Silicone Pad×2 Quick Start Guide
CTP18
VCH51
Remote Control Package
(Only Teams edition)
Touch Panel Package
VCH51 Sharing Kit
• Standard accessories
• Optional accessories
WPP20
Wireless Presentation Pod

2
E
N
G
L
I
S
H
CTP18 Connection
Reset
MAC
SN
3m Ethernet Cable
7.5m Ethernet Cable
Endpoint Connections
Note:
• If you only need to use one display, please connect to HDMI 1 port.
• You can operate the A20 either by remote control (only Teams edition), CTP18 or mouse. If you connect a touch
display device, you can also use touch control.
12
2
1
PoE
Display
Power Adapter
1.8m HDMI Cable
3m Ethernet Cable
7.5m Ethernet Cable
VCH51 (support the wired con-
tent sharing without the clutter
cables issue)
PoE
Make sure that CTP18 and the
MeetingBar A20 are in the same
LAN.

3
E
N
G
L
I
S
H
Pair with CTP18
Upgarde the Firmware
Pair A20-Teams with the CTP18:
1. Sign in the same Microsoft Teams account in both CTP18 and the endpoint
during initialization.
*You need to use the mouse or touch control if you have no remote control.
2. Select the desired endpoint on the CTP18.
3. Enter the pairing code displayed on the endpoint in CTP18 and complete
pairing.
Pair A20-Zoom with the CTP18:
1. If you get the bundle devices, the pairing will be automatically done by the
system. If you get a single new CTP18, please enter the IP address of the
A20 in CTP18 to make the system paired.
2. Sign in the Zoom account on CTP18 and A20 will synchronize information.
For more information about how to pair with the CTP18, please refer to the following video.
Teams Edition Zoom Edition
You need to upgrade the rmware of MeetingBar A20 and CTP18 separately.
1. (Teams) Go to More > Settings > Device Settings > About obtain IP address.
(Zoom) Go to Settings > System Setting > About obtain IP address.
2. Open a web browser and enter the IP address of A20/CTP18 in the address bar. For
example, https://10.82.24.11/, and press Enter.
3. Enter the administrator username and the password, and click Login. (The default
user name is "admin", password is "0000").
4. Go to Settings > Upgrade.
5. On the right side of Upgrade Firmware, click Browser to upload the desired rmware.
6. Click Upgrade.
Please get the latest rmware at https://support.yealink.com/.
Note: For a better pairing experience, we recommend starting the A20 endpoint rst
and then the CTP18.

4
E
N
G
L
I
S
H
Endpoint Installation
Use the bracket to mount your endpoint on a wall. The mounting height affects
your camera view. The recommended height is 1.1m above the ground.
Wall Mounting
Step1: Assemble the mounting bracket
• Mount on a Wall
A20 position
NN
3
4
5
Step2: Mount the A20 to the wall
T4×30 screws
Hole depth: 30mm
Hole diameter: 6mm
TV
10cm
TV
H>120cm
H<120cm

5
E
N
G
L
I
S
H
NN
3
4
5
• Using Yealink TV Mount Bracket
Note: The TV stand should be purchased separately.

6
E
N
G
L
I
S
H
Adjusting the Camera Tilt
15°
15°
• Put on a desk
TV
• Put on a TV stand cart platform
TV TV
Silicone Pad