Yealink MeetingBar A30 User manual

MeetingBar A30 Deployment & ConnectionMeetingBar A30 Deployment & Connection
Package ContentsPackage Contents
TIPTIP
For the MeetingBar A30 unboxing video, please refer to Video: MeetingBar A30 Unboxing.
MeetingBar A30 Deployment & Connection
1

Remove Protective ShellRemove Protective Shell
Install MeetingBar A30Install MeetingBar A30
Mount it on a wallMount it on a wall
1. Determine MeetingBar A30 position1. Determine MeetingBar A30 position
The mounting height affects your camera view. The recommended height is 1.1 m above the ground.
MeetingBar A30 Deployment & Connection
2

2. Install mounting bracket2. Install mounting bracket
Step 4: Expansion Screws: φ6 * 30 mm. Hole depth: 6 mm, Hole diameter: 30 mm.
Step 5: Screws: 4*30 FAHOZN3+ (+)
NOTENOTE
Embedded installation is prohibited (For example: inside the wall, enclosed space).
MeetingBar A30 Deployment & Connection
3

3. Mount it to bracket3. Mount it to bracket
Screws: 1/4’’ -20 UNC
Mount it on TV stand cart platformMount it on TV stand cart platform
Put it on a deskPut it on a desk
MeetingBar A30 Deployment & Connection
4

Adjust Camera TiltAdjust Camera Tilt
Connect/Pair MeetingBar A30Connect/Pair MeetingBar A30
For a better pairing experience, we recommend starting the MeetingBar A30 first and then the CTP18. The
MeetingBar A30 and CTP18 must be on the same LAN or connected to the same Wi-Fi before pairing and completing
the setup.
You can power the CTP18 through PoE, as shown in the figure below.
After the deployment and connection are successful, please refer to Quick Setup to complete the setup wizard, and
refer to Quick Usage to learn about getting started quickly.
MeetingBar A30 Deployment & Connection
5

Supported AccessoriesSupported Accessories
For more information, please refer to Teams Room Accessories Compatibility Lists.
FAQFAQ
Is the A10/A20/A30 unable to obtain the network, or is the network connection abnormal?Is the A10/A20/A30 unable to obtain the network, or is the network connection abnormal?
NOTENOTE
If you only use one display, please connect to HDMI 1 port. The functions of the VC hub/phone port and the VC
Hub/ Internet port are different, and please pay attention to the connection method when using.
NOTENOTE
Not included accessories requirements:
Display: Resolution of 1080p or higher and with an HDMI port.
PC: Equipped with HDMI or USB-C (support DP protocol) Port.
MeetingBar A30 Deployment & Connection
6

How do I connect VCM36-W with the MeetingBar A20/A30?How do I connect VCM36-W with the MeetingBar A20/A30?
How do I pair CPW90 with the MeetingBar A20/A30 Teams?How do I pair CPW90 with the MeetingBar A20/A30 Teams?
How do I connect VCM38 with the MeetingBar A20/A30?How do I connect VCM38 with the MeetingBar A20/A30?
MeetingBar A30 Deployment & Connection
7