Yealink MVC Series User manual

Yealink Network Technology CO., LTD
Yealink MVC Series for Microsoft Teams Rooms System
Quick Start Guide(V1.6)
V32.35
English | 简体中文

Power Adapter
Package Contents
Mini-PC Package (Mini-PC and Mini-PC Box)
MVC900 Package
UVC80
UVC80
Quick Start Guide
2.5m
USB Cable
Power Adapter
48V/0.7A
Mounting Bracket
and Accessories
Cable Tie×5
VESA Accessory
(1/4”-20 UNC screw)
(T4×30 screw)
(M3×8 screw)
7.5m
Ethernet Cable
Velcro×2
MShare 3M
Cable Tie Mounting Base×2
Cable Ties×2
×4
1.2m HDMI Cable and
1.2m Mini-DP Cable
7m
USB Cable (for content sharing)
Velcro×2 MShare
Quick Start Guide
UVC80 Package (Camera)×2
MShare Package (Screen Sharing)
Machine Screw×27m USB CableMTouch
MSpeaker
MSpeaker
Quick Start Guide
Expansion screws and Self-tapping screws
2m AUX Cable
+
+
2
2
Power Cable
VCM34 Silicone Pad VCM34
Quick Start Guide
3m
Ethernet Cable
Mini-PC Upper Cover Bracket
1.8M
HDMI Cable×2
Velcro×2
Machine Screw×6
Expansion screws and
Self-tapping screws
+
+
2
2
MTouch
Quick Start Guide
MTouch Package (Touch Console) VCM34 Package×4 (Microphone)
MSpeaker Package (Soundbar)
(One Velcro is on the bracket)
Mini-PC
Camera Lens
Privacy cover
VCR20
Remote Control
Camera-Hub Package
Camera-Hub 7.5m
Ethernet Cable
USB3.0 to Ethernet
Adapter
Cable Tie×5 3m RCA to
3.5mm Audio Cable
1
Camera-Hub
Quick Start Guide

MVC900 & MVC800 & MVC500 & MVC300 Connection
MVC900 Connection
Do not connect the switch to the Internet, otherwise it will cause network abnormalities.
When starting up the system for the first time, you need a USB hub to connect a mouse to complete the initial configuration.
We recommend using the wireless mouse and keyboard kit.
For more information about the installation and deleployment of accessories (for example, the installation of mini-PC package or
the camera-hub), refer to the Quick Start Guide of corresponding accessory.
5
...
MTouch
MShare
Projector
CAT5e
USB2.0
USB2.0
HDMI
HDMI
HDMI HDMI
Display
Type-B
Ethernet Cable
VCM34(Optional)
VCM34
(Optional)
UVC80
The Back of Mini-PC The Front of Mini-PC
UVC80
CAT5e
CAT5e
CAT5e
CAT5e
CAT5e
CAT5e CAT5e
Camera-Hub
USB3.0 to Ethernet
Adapter
MSpeaker(Optional)
3m RCA to
3.5mm Audio Cable
Switch
The switch and Ethernet cables should be purchased separately.
VCM34
(Optional)
VCM34
(Optional)

MVC300 Connection
MShare
The Back of Mini-PC The Front of Mini-PC
Display Display
USB2.0
USB2.0 USB2.0
USB2.0
Type-B
HDMIHDMI
MTouch
HDMI HDMI
Ethernet Cable
UVC30 Room
7
For more information about the installation and deleployment of accessories (for example, the installation of the mini-PC package or
the UVC30 Room camera), refer to the Quick Start Guide of corresponding accessory.
When starting up the system for the first time, you need a USB hub to connect a mouse to complete the initial configuration.
We recommend using the wireless mouse and keyboard kit.
Wireless Sharing
WPP20
Wireless Presentation Pod
PC
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs
to be purchased separately.
Make sure the MShare is connected to the mini-PC.
Procedure
1. Connect the WPP20 to the USB port of the MShare.
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MShare successfully.
3. Connect the WPP20 to the PC.
CP900

8
Upgrading System Software through Windows Update
Enabling Automatically Windows Update
Procedure
1. On the display screen, navigate to More-> Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings->Go to Admin Sign-in.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5 . Tap the Start button, and then go to Settings->Upgrade & Security->Windows Update , and
select Advanced options .
6. Enable Automatically download updates, even over metered data connections
(charge may apply) .
The system software(including the Windows, the Camera-Hub/UVC80/UVC50/UVC30 Room, the
MTouch and the MShare) can be automatically upgraded via windows update by default.
Otherwise, you can enable automatically windows update or upgrade the devices manually.
The software upgrade is only supported by the operating system of 64-bit Windows 10.
Manually Windows Update
Procedure
1. On the display screen, navigate to More ->Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings->Go to Admin Sign-in.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Do one of the following:
Long tap the Start button, and then select
Device Manager .
Select the desired device and then long tap the device to select Update driver .
Select a desired way to update.
Tap the Start button, and then n
avigate to Settings->Upgrade & Security->Windows Update ,
and select Check for updates .
Select the desired device and then complete the installation.

Resetting UVC80/UVC50/UVC30 Room Camera to Home Position
1. Tap More-> to enter the Camera Control page.
2. Tap
Reset .
Procedure
Controlling UVC80/UVC50/UVC30 Room Camera Position
1. Tap More-> to enter the Camera Control page.
2. Tap or to zoom camera in/out.
3. Tap / / / to pan/tilt the camera.
Procedure
If the auto-framing feature is enabled, you can not control the UVC30 Room camera.
Enabling/Disabling Auto-framing
1. Tap More-> to enter the Camera Control page.
2. Select .
3. Enable/Disable Auto-framing.
Procedure
9