aivituvin AIR 48 User manual

I
AIR 48
www.aivituvin.com
NSTRUCTION
MANUAL

Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure
every 90 days.
Fasten screws loosely during initial assembly. Do not
fully tighten screws until the item is completely
assembled.
Do not use or store this item in the proximity of open
flame or flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop
using this product until repairs are made and/or factory
replacement parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future
NOTICE
01

02
PHILLIPS
SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY
M4.0x40 mm SCREW
36PCS+1 spare
M3.5x60 mm SCREW
14PCS+1 spare
M3.5x55 mm SCREW
8PCS+1 spare
M3.5x35 mm SCREW
28PCS+1 spare
TOOLS REQUIRED
HARDWARE
P1 P2
P3 P4
P5 P6
M3.5x25 mm SCREW
26PCS+1 spare
M3.0x16 mm SCREW
12PCS+1 spare
P5 P6

03
HARDWARE
Front
Nesting box Nesting box
Pen
Back

04
A B
C
FG
H
PARTS
Support frame of pen
1PC
Left panel of coop
1PC
Right panel of coop
1PC
Tray
1PC
Front panel-up
1PC 1PC
Back panel of pen-up
D
E1 E2
Back panel of coop
1PC
1PC 1PC
Front panel-down Right panel of pen
(close to coop)

I
J1
PARTS
05
1PC 1PC
J2
1PC
Leftpanel of pen
NO P
1PC
Panel of nesting box
2PCS 2PCS
Panel of nesting box
2PCS
Divider of nesting box
2PCS
Bottom of nesting box
2PCS
KL M
Left panel of pen
(close to coop) Right panel of pen
(outside) (outside)
Back panel of pen-down
Panel of nesting box

06
W X
PARTS
Roof connect bar
2PCS
Roof cap
2PCS 2PCS
Y
Q
R
Roof of nesting box
2PCS 1PC
S
2PCS
Roof
T
U
Roof
2PCS 2PCS
Perch of coop
V
2PCS
Perch of pen
Ramp
PVC Waterproof Strip

PRODUCT ASSEMBLY
01
Attach the coop !
①Attach the Part A , Part B , Part G , Part E1 by 6xP1 screws.
②Attach the panel Part E2 by 6xP1 screws.
07
A
E2
E1
G
02
①Slide in the tray Part F.
②Insert the perches 2xPart U into the slots inside the front and back panel.
F
P1 X6
U
P1 X6
B

PRODUCT ASSEMBLY
03
08
04
①Attach the right nesting box !
②Attach the panel Part L & M to the right panel of coop by 4xP3 & 2xP4 screws.
M
R
P4 X1
Attach the ramp Part R to the back panel Part B by 4xP6 screws as show on the picture.
P6 X4
P4 X1
P3 X4
L

PRODUCT ASSEMBLY
05
06
Attach the panel Part N to the right of nesting box by 6xP1 screws.
09
P1 X6
N
Attach the left nesting box !
Attach the panel Part L & M to the left panel of coop by 4xP3 & 2xP4 screws.
P4 X1
L
P4 X1
P3 X4
M

PRODUCT ASSEMBLY
08
07
Attach the panel Part N to the left of nesting box by 6xP1 screws.
10
P1 X6
N
Drop in the bottom panel of nesting box 2xPart P to 2 nesting box as show on the picture.
P
P

PRODUCT ASSEMBLY
09
Slide in the divider 2xPart O to each Part P as show on the picture.

10
11
I
Attach the pen !
Attach the panel Part I & H (Close to the coop ) to the coop by 6xP2 screws.
O
H
O
P2 X3
P2 X3

PRODUCT ASSEMBLY
12
Attach the support frame Part D to the Part J1 & J2 (outside) by 4xP1 screws as show on
the picture.
11
Attach the panel Part J1 & J2 (outside) to the Part I & H by 6xP2 screws.
12
P2 X3
J2
P1 X4
J1
P2 X3
D

PRODUCT ASSEMBLY
13
14
Attach the back panel pact C & K by 2 x p2 screws.
13
P2 X2
Attach the panel Part C & K to Part J1 & J2 by 8xP1 screws.
P1 X8
C
K
K
C

PRODUCT ASSEMBLY
15
Attach 2pcs of perches part V to the pen by 4 x P4 screws each side as show on picture.
14
P4 X4
V

PRODUCT ASSEMBLY
17
Attachtheroof 2xPart S & 2x Part T to the coop by 16xP4 screws.
(Notice do not confuse the position of Part S & Part T)
16
Attach the nesting box roof 2xPart Q to the nesting box by 4xP6 screws each side.
15
P4 X16
P6 X4
Q
P6 X4
Q
S
S
TT

PRODUCT ASSEMBLY
19
Connect the roof with connect bar 2xPart W by 12xP5 screws.
18
Attach the roof cap 2xPart X to the roof by 8xP5 screws.
16
P5 X8
Xx2
P5 X12
W

PRODUCT ASSEMBLY
21
Attached PVC Waterproof Strip Part Y to the left side nesting box by 3XP5 screws.
20
Attached PVC Waterproof Strip Part Y to the right side nesting box by 3XP5 screws.
17
P5 X3
Y
P5 X3
Y
Finish

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting from
the incorrect attachment,improper use,inadequate miantenance,or neglect of this