aivituvin AIR 29 User manual

INSTRUCTION
MANUAL
AIR 29

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

02
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR27 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR27.
There are 3 different combination for your optional choice.
①
②
Option 1
Pls refer to page 9.
Option 2
Option 3
Pls refer to page 10.
Pls refer to page 11.

03
Notice
Read Before Assemble!
The below steps are using for the chicken coop and enclosure combination
pls ignore if you don't have chicken coop.
AIR29 can attach to coop AIR27,AIR31,AIR32,AIR61.
①
②
Pls refer to page 12 .
AIR29+AIR31:
AIR29+AIR32:
Pls refer to page 13.

04
Notice
Read Before Assemble!
Pls refer to page 14 .
AIR29+AIR61:

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
05
M6.0x25mm BOLT
M6.0x30mm BOLT
16PCS+1spare 4PCS+1spare
P3 P4
P5
Ties
2PCS + 2PCS SPARE
2PCS
M6.0x20mm BOLT
4PCS+1spare
P6
Lock
1PC
P7
M3.5x45mm SCREW
8PCS+1spare
Screw driver

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
BC
DE
1PC
1PC 1PC
06
1PC
1PC
Left side of the front panel
Right side of front panel
Left panel
F
1PC
Right panel
G H
2PCS
1PC
Roof
Perch
A
Part B opposite side
Part A opposite side

PRODUCT ASSEMBLY
01
02
07
Insert the perch Part H into slots inside front and back panel..
Attach Part A, B, C, D to E, F by bolt 12xP1.
E
P
1
X
12
F
A
B
C
D
Hx2
P
2
X
4

P1
X4
PRODUCT ASSEMBLY
03
08
Attach the roof Part G by 4xP1 as show on the picture.
04
G
Attach the lock P4 by 2XP3 each side.
Finish here for using the enclosure alone !
P3
X4
P4
X2

05
09
Take out the casters of coop.
OPTION 1
Take out the right side pen panel of coop.
Take out the small door of left panel of enclosure.
①
②
③
06
Open the door of enclosure, and attach the enclosure to the coop
by 4XP7 screws.
P7
X4
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR27 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR27.
Push upward
to take out

OPTION 2
07
10
Take out the casters of coop.
Take out the right side pen panel of coop.
Push upward the hinge to take out the front door of enclosure.
①
②
③
Push upward
to take out
08
Attach the enclosure to the coop by 2XP5 ties and 2XP7 screws.
P7
X2
P5
X2

OPTION 3
09
11
①
②
③
④
Take out the casters of coop.
Take out the spring latch of the pen of coop.
Push upward the hinge to take out the door of the front pen of coop.
Take out the small door of left panel of enclosure.
Push upward
to take out
10
Open the door of enclosure, and attach the enclosure to the coop
by 4XP7 screws.
P7
X4
Finish here for AIR29 and AIR27 combination

11
12
Push upward to take out the small door of right panel of coop.
Take out the small door of left panel of enclosure.
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR31 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR31.
①
②
Push upward
to take out
12
Attach the enclosure to the coop by 2XP7 screws and 2XP5 ties.
P5
X2
P7
X2
Finish here for AIR29 and AIR31 combination

13
13
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR32 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR32.
14
Attach the enclosure to the coop by 2XP7 screws and 2XP5 ties.
Take out the right side panel of coop.
Take out the small door of left panel of enclosure.
①
②
P7
X2
P5
X2

15
①Take out the small door and push handle of coop.
②Take out the small door of left panel of enclosure.
14
The below steps are using for chicken coop AIR61 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR61.
Read Before Assemble!
Notice
Notice
Read Before Assemble!
16
Attach the enclosure to the coop by 2XP7 screws and 2XP5 ties.
P7
X2
P5
X2

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.