aivituvin AIR 12 User manual

INSTRUCTION
MANUAL
AIR 12
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
30MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
P5
02
M3.5x40m SCREW
M3.0x25mm SCREW
10PCS+1spare
P6
8PCS+1spare
M3.0x16mm SCREW
10PCS+1spare
1PC
Roof hinge
M3.5x45mm SCREW
2PCS+1spare
4PCS
Foot pad

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
D E F
G
1PC
1PC 1PC
03
HI
1PC
1PC
1PC
1PC
1PC
Front panel
Back panel Left panel
Right panel
1PC Roof
Bottom floor
Bottom floor
Eaves Curtain

PRODUCT ASSEMBLY
01
02
04
Attach the Eaves part G above the door by 2xP1 screws.
Attach the curtain part H to front panel part A by 2xP3 screws.
P3X
P1X
2
G
A
2
H

PRODUCT ASSEMBLY
03
04
05
Attach the back panel part B to side panel part C & D by 4xP2
screws.
Attach the front panel part A to the hutch by 4xP2 screws.
P2
X4
B
C
A
D
P2
X4

PRODUCT ASSEMBLY
05
06
06
Put the bottom floor part E & F inside the hutch as show on the
pictures.
Attach the roof panel part I to the hutch by 6xP4 screws.
I
E
P
4
X6
F

PRODUCT ASSEMBLY
07
07
Screw the roof hinge P5 to connect the roof and side panel by 4xP4
each side.
P
5
X1
X4
P4

PRODUCT ASSEMBLY
08
P
3
X8
P
6
X4
08
Attach the foot pad 4XP6 to each legs by 8xP3 screws.

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.