aivituvin AIR 55 User manual

INSTRUCTION
MANUAL
AIR 55
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’ s instructions as this could void the product
warranty.
01

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
21PCS+1 spare
P1 P2
P3 P4
02
M3.0x16mm SCREW
12PCS+1 spare
M3.5x40mm SCREW
Latch
2PCS
P5
Plastic botton
1PC
Plastic pipe
1PC

PARTS
A B C
DEF
G
1PC
1PC 1PC
03
HI
1PC
1PC
1PC
1PC
1PC
Right panel
Front panel Back panel Left panel
Left tray
Right tray
Divider
Wooden roof
1PC
Metal lamp tube

PARTS
J K
04
L
1PC
Wire roof
1PC
Metal lamp tube
1PC
Metal lamp tube

05

PRODUCT ASSEMBLY
01
02
06
Attach Front panel Part A to Parts C,D,E by 6xP1 screws.
A
P1X6
CDE
P1X6
A
BDC
Attach back panel Part B by 6xP1 screws.

PRODUCT ASSEMBLY
03
04
07
Slide in the tray Part F & G from left and right side.
F
Screw the roof Parts H,L to the house with the hinges by 8xP2 screws.
P2X8
L
H
G

PRODUCT ASSEMBLY
05
08
Complete the roof by screwing the latch 2xP3 by 8xP2 screws.
P2X8
P3X2
06
Rota the metal lamp holder firstly.
IJK

PRODUCT ASSEMBLY
07
09
Finish
P4X1
P2X2 P5X1
P2X3
Screw it to the cage using the P4 by 2xP2 screws on the upper part;
then screw the lower part P5 by 3xP2 screws.

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.