aivituvin AIR 25 User manual

INSTRUCTION
MANUAL
AIR 25
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’ s instructions as this could void the product
warranty.
01

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
8PCS
P1 P2
P4
P5
02
M6.0x30mm BOLT
1PCS+1spare
M3.0x20mm SCREW
4PCS
M6.0x45mm BOLT
P6
P7
12PCS+1 spare
P3
M3.0x28mm SCREW
1PC
Spanner
4PCS+1 spare
M3.0x14mm SCREW
4PCS+1spare
M3.0x10mm SCREW

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
03
ABC
1PC 1PC
2PCS
Front Panel of Small
House
Back Panel of Small
House Side Panel of Small
House
D
EF
1PC
1PC
1PC
Back Panel Left Panel
Top of Small House
GH
I
2PCS
1PC
1PC
Right Panel Front Panel
Caster
2PCS
Caster with brake
J
1PC
Bottom Layer
K
1PC
Tray
L

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
04
MNO
1PC
1PC
1PC Middle Layer PVC Layer
Shelf
Ramp
P
1PC
QR
1PC
1PC
Upper Layer PVC Layer
ST
1PC 1PC
Ramp Roof
U
1PC
Support

PRODUCT ASSEMBLY
01
02
05
Attach the small house,attach the Part A,B,C&D by 12XP3 screws.
P3
X8
A
Attach the Part E,F,G,H by 8XP2 screws.
P3
X4
B
C
CD
H
P2X
8
E
F
G

PRODUCT ASSEMBLY
03
04
06
①Screw the caster 2x Part I on the front legs.
②Screw the caster with brake 2x Part J on the back legs.
Put in the bottom layer Part K.
Ix2
Jx2
P7X1
K

PRODUCT ASSEMBLY
05
07
06
Put in the tray Part L above the bottom layer.
Attach the Shelf Part M by 4XP1 screws.
L
M
P1X4

PRODUCT ASSEMBLY
07
08
Put in the middle layer Part N.
08
②Put in the pvc layer Part O above the middle layer.
①Attach the ramp Part P to middle layer by 2XP6 screws.
N
O
P6X2
P

PRODUCT ASSEMBLY
09
09
Put in the upper layer Part Q.
10
①
②Put in the pvc layer Part R above the upper layer.
Attach the ramp part S to the upper layer by 2XP6 screws.
Q
R
P6X2
S

PRODUCT ASSEMBLY
11
10
Screw the roof Part T by 4XP5 screws.
12
①
②Put in the small house inside the hutch anywhere you want.
Screw the support part Uto the left panel by 1XP4 screw.
T
P5X4
U
P4X
1
Finish

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.