aivituvin AIR 59 User manual

I
AIR 59
www.aivituvin.com
NSTRUCTION
MANUAL

Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure
every 90 days.
Fasten screws loosely during initial assembly. Do not
fully tighten screws until the item is completely
assembled.
Do not use or store this item in the proximity of open
flame or flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop
using this product until repairs are made and/or factory
replacement parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future
NOTICE
01

02
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
60MIN. ASSEMBLY
M6.0x55 mm BOLT
8PCS+1 spare
M3.5x60 mm SCREW
20PCS+1 spare
M3.5x40 mm SCREW
16PCS+1 spare
M3.5x35 mm SCREW
12PCS+1 spare
TOOLS REQUIRED
HARDWARE
P1 P2
P3 P4
P5
M3.5x25 mm SCREW
8PCS+1 spare
P5
P6
M3.0x16 mm SCREW
6PCS+1 spare
P6
P7
Lock
1PC
P6
M3.0x12 mm SCREW
2PCS+1 spare
P8

03

04
GH
PARTS
Front panel of nesting box
2PCS
Bottom of nesting box
2PCS
Divider
2PCS
I
A
B
Upper panel-front and back
2PCS 2PCS
Side panel
C
1PC
Tray
D
E
Perch
3PCS 2PCS
Side panel of nesting box
F
2PCS
Side panel of nesting box

05
J K
L
PARTS
Roof cap
2PCS
Roof of nesting box
2PCS 2PCS
PVC Waterproof Strip
M
Roof
2PCS
N
2PCS
Down panel- front and back

PRODUCT ASSEMBLY
01
Attach Part A & N to the side panel Part B by 16XP2 screws, then connect the Part A & N
by 2XP8 screws.
06
N
B
P2 X16
A
B
NA
N
B
A
B
NA
P8 X2

PRODUCT ASSEMBLY
Insert the perches 3xPart D into the slots inside the front and back panel of coop.
02
07
Dx3
03
Slide in the metal tray Part C.
C

PRODUCT ASSEMBLY
04
Attach the side panels of nesting box Part E & F to the right side of coop by bolt 4xP1.
05
08
F
P1 X4
P1
E
Attach the side panels of nesting box Part E & F to the left side of coop by bolt 4xP1.
P1 X4
E
F

PRODUCT ASSEMBLY
06
Drop in the bottom panel of nesting box Part H.
Slide in the divider Part I each side.
09
H
①
②
H
I
I
07
Attached the front panel of nesting box Part G by 4xP3 screws each side. .
P1 X4
P3
P1 X4
P3
G
G

PRODUCT ASSEMBLY
08
Attach the roof of nesting box 2xPart J to the nesting box by 4XP5 screws each side.
Make sure the lock is functioning properly before locking the roof.
10
P5 X4
J
P5 X4
①
②
J
09
Attach the coop roof 2xPart K to the coop by 8XP3 screws.
Kx2
P3 X8

PRODUCT ASSEMBLY
10
Attach PVC Waterproof Strip 2xPart L to the nesting box by 4XP4 screws each side.

11
L
P4 X4
L
P4 X4

PRODUCT ASSEMBLY
11
Attach the roof cap Part M by 4XP4 screws.
Attach lock P7 to the tray by 6xP6.

12
P6 X6P7 X1P4 X4
M
Finish here for only buying one coop
①
②

13
Notice
Read Before Assemble!
Pls ignore the following for only one coop owner !

PRODUCT ASSEMBLY
12
Attach the run to the coop by 2xP2 screws.
14
P2
X2
13
Attach the run to the coop by 2xP2 screws.
P2 X2
Finish

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting from
the incorrect attachment,improper use,inadequate miantenance,or neglect of this