aivituvin AIR 04-B User manual

INSTRUCTION
MANUAL
AIR 04-B
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
P5
02
M3.5x40mm SCREW
M3.5x35mm SCREW
M3.5x50mm SCREW
28PCS+1spare
8PCS+1spare
8PCS+1spare
P6
16PCS+1spare
M3.5x25mm SCREW
12PCS+1spare
M3.0x16mm SCREW
P7
1PC
2PCS+1spare
M3.0x10mm SCREW

A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
ABC1
DE1
E2
1PC
1PC 1PC
03
F1 F2
1PC
1PC
1PC
1PC
1PC Tray
Front panel
Back panel Right side panel
Front panel of pen 1
Left side panel
1PC
Front panel of pen 2 Back panel of pen 2 Back panel of pen 1
C2
PARTS

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
2PCS
2PCS 2PCS
1PC
2PCS
1PC
2PCS
2PCS Wooden hutch roof
Side panel of pen
Ramp Pen roof
Splayed supporting bar
Pen roof
2PCS
Wooden hutch roof cap Pen roof cap Folding metal feeder
G H I1
I2 J
LM
K
N
04

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
O
3PCS
Put in the divider Part D
05

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
Hutch
Pen 1
Pen2
E1
（Front panel of pen 1)
E2
（Front panel of pen 2)
Pen2
Pen 1
F1
（Back panel of pen 2)
F2
（Back panel of pen 1)
06

PRODUCT ASSEMBLY
01
02
①Attach front panel Part A to two side panels by 4pcs of P2 screws.
②Screw the feeder Part N inside the back panel Part B by 2pcs of P6
screws.
Attach a Part B to Part C1 and Part C2 by 4pcs of screws.
P2X
4
B
P2X
4
A
N
C1
C2
P6X
2
07

PRODUCT ASSEMBLY
03
04
Screw the ramp Part H to the left, right bar by 4pcs of P5 screws
on each side.
①Assemble the left and right pen.
②Conncet the front panel E2, back panel F2 and side panel G by
2pcs of P2 screws on each side.
③Repeat this step on the left pen.
H
G
P5
X4
F2
D
H
G
F1
E1 E2
P2
X2
P2
X2
P2
X2
P2
X2
08

PRODUCT ASSEMBLY
05
06
09
①Screw the splayed supporting bar Part K to the right side panel
by 2pcs of P3 screws.
②Repeat this step on the left side.
①Attach the pen to the hutch on the front and back panel by 2pcs
of P1 screws on each side.
②Repeat this step on the left side.
K
P
7
X1
E1
F2
P
3
X2
P
3
X2
K
P
1
X2
P
1
X2
E2
F1
B
A
P
1
X2
P
1
X2

PRODUCT ASSEMBLY
07
08
10
①Attach the two roof Parts J to the hutch by 8pcs of P3 screws.
②Notice to level up the same line with the two roof Parts.
①Attach the two pen roof Parts I1 and I2 to the pen by 8pcs of P3
screws.
②Repeat this step on the left side.
③Notice to level up the same line with two roof Parts.
I2
Jx2
P3
X8
P
3
X8
P3
X8
I2
I1
I1

PRODUCT ASSEMBLY
09
10
11
Screw the roof cap Part L into the roof by 4pcs of P4 screws.
①Screw the roof cap Part M into the roof by 4pcs of P4 screws.
②Repeat this step on the left side.
M
L
P4
X4
P
4
X4
P4
X4
M

PRODUCT ASSEMBLY
11
12
If the hutch is putting indoor, after finish the whole hutch, put the
3pcs of PVC layer together then put the hutch above the layer.
LOCKED
OPEN
Ox3

HELP CENTER
[email protected]
Question about your product? we're here to help contact us via
Returns & Refunds
?
Product AssemblyOrders FAQProduct inquiry
THANK YOU
Thanks for your support to Aivituvin.
Your satisfaction is our #1 priority.
Once the items are received, opened, and deemed to be faulty
or other problems.
Pls contact us at [email protected] for the solution.
We will feedback to you within 24 hours.
If you are happy with the shopping ,welcome to share photos
and thoughts with others .
www.aivituvin.com
13

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.