aivituvin AIR 27 User manual

INSTRUCTION
MANUAL
AIR 27
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
02
M3.5x60mm SCREW
M6.0x30mm BOLT
8PCS+1spare 10PCS+1spare
P3 P4
M3.5x35mm SCREW
M3.5x45mm SCREW
2PCS+1spare 30PCS+1spare
P5 P6
M3.5x25mm SCREW
7PCS+1spare
P7 P8
Connect pieces
M3.0x16mm SCREW
36PCS+1spare
M4.0x30mm BOLT
2PCS 2PCS
(Only for 2 coops combination.
not available for one coop owner)

HARDWARE
P9
03
Spring latch
3PCS
P10
Lock
2PC
P11
Lock
1PC

04
Coop
Pen
Nesting box

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
BC
DF
1PC
1PC 1PC
05
1PC
Back panel of coop
Front panel of coop
Front panel of pen
G
1PC
H J
1PC
1PC
Side panel of pen
A
Right panel of coop
Left panel of coop
CARTON 1/2
K
1PC
1PC

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
OV
UN
1PC
1PC
06
2PCS
Front panel of nest box
Ramp
L
Casters
Metal ramp support
1PC
Hardware bag
Metal Rod
2PCS
Perch

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
IM
QP
1PC
1PC 1PC
07
Metal tray
Roof of pen
Divider of nest box
R
1PC
Roof of nest box
S T
1PC
2PCS
Roof of coop
Roof cap
E
Bottom panel of nest box
1PC
CARTON 2/2
W
1PC
PVC Waterproof Strip
1PC
Push handle

PRODUCT ASSEMBLY
01
02
08
Insert perch Part O into slots inside Part A & B.
Slide in metal tray Part E.
①Attach the front Part B,the back Part A to the Part C & D by 8xP4.
②Notice to align with the dowels.
B
A
P
4
X
8
Ox2
C
D
①
②
E

PRODUCT ASSEMBLY
03
09
04
Ensure that all pen-panels have stapled-wire facing inside.
Attach Part F & G to coop by 4xP2.
Attach metal ramp support Part V to the back panel by 2xP7.
P2
X4
①
②
③
F
G
P7
X2
V
Screw ladder Part N to the bottom half of lower panel on Part D by
4xP6.
Notice not to block with the sliding door.
①
②
P6
X4
N

PRODUCT ASSEMBLY
05
10
06
Attach Part L to Part J & K by 4xP4.
Attach the caster Part U to the nesting box by 4xP1 each.
(If you buy 2 coops, you do not need to assemble casters)
P1
X4
H
J
Attach Part H to the pen sides by 4xP4.
Notice to align with the dowels.
Attach metal rod to the slide door of panel Part D by 2xP6.
①
②
③
P4
X4
①
②
L
K
U
P4
X4
P6
X2

PRODUCT ASSEMBLY
07
11
08
P4
X2
Attach the nesting box to the coop by 1xP4 & 1xP2 each side.
(Notice screw the P4 from inside in the upper position, screw
the P2 from outside in the down position)
Drop in nest box floor Part M.
Slide in nest box divider Part P.
①
②
③
P2
X2
MP
P10
X1
P6
X6
Attach the lock P10 to the nesting box by 6XP6.
Make sure the lock is functioning properly before locking the roof.
R
①
②

PRODUCT ASSEMBLY
09
12
10
Attach roof of nesting box Part R to the coop by 4XP6.
P6
X4
Attach the roof Part I by 4xP4 to complete side pen.
Attach the lock P11 to the pen by 4XP6.
P4
X4
I
P11
X1
P6
X4
①
②

PRODUCT ASSEMBLY
11
13
12
Screw the push handle Part Q to the side pen by 4xP2.
Q
P2
X4
Screw roof panels Part S to the coop by 8xP4.
Attach the lock P10 to the tray by 6XP6.
①
②
Sx2
P4
X8
P6
X6
P10
X1

PRODUCT ASSEMBLY
13
14
14
Ensure top roof panels line up with each other before screwing Part
T by 4xP5.
Attach PVC Waterproof Strip Part W to the nesting box by 3XP5.
①
②
Finish here for only buying one coop
P9
X3
P6
X6
P5
X4
T
W
P5
X3
Attch spring latch P9 by 2xP6 each. Notice the direction of spring latch.

15
Notice
Read Before Assemble!
Pls ignore the following for only one coop owner !
The caster, the side pen panel Part H, the push handle Part Q, the metal
rod,the pen lock P11 are not needed in 2nd coop.
There are 2 different combinations for your optional choice.
①
②
③
Option 1
Option 2

16
Notice
Read Before Assemble!
From Step 15 to Step 16 are assemble step for 2nd coop.
The caster, the side pen panel Part H, the push handle Part Q, the metal
rod are not needed in 2nd coop.
①
②

15
17
Notice the direction of Part C & D is different with the 1st coop.
(Very important)
①
②
③
DA
C
B
P4
X8
PRODUCT ASSEMBLY
(Very important !)
！
Notice the direction of
Part C & D is different
with the 1st coop.
Repeat the same assembly ways from step 2-step13 the same as the
1st coop.

16
18
PRODUCT ASSEMBLY
P9
X2
P6
X4
P9
X1
P6
X2
Attch spring latch P9 by 2xP6 each. Notice the direction of spring latch.

OPTION 1
17
19
18
Take out 2xDowel on the left side of front pen panel of the 2nd coop.
(Suggest to use pliers)
Dowel x 2
TAKE OUT !
①
②
③
Take out the casters for the first coop.
Push upward the hinge to take out the door of the front pen of the
1st coop.
Take out the spring latch on the pen of the 1st coop.
to take out
Push upward