aivituvin AIR 80 User manual

INSTRUCTION
MANUAL
AIR 81
www.aivituvin.com
AIR 80

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
30MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
02
M6.0x30mm SCREW
M3.5x35mm SCREW
M6.0x55mm BOLT
8PCS+1spare
4PCS 8PCS
P5 P6
M3.0x34mm SCREW
12PCS+1spare
M3.0x18mm SCREW
11PCS+1spare
P7
Connection strap
2PCS
M3.0x14mm SCREW
6PCS+1spare

PARTS
03
AB C
1PC
Back metal bar-left
D
1PC
Back metal bar-right
E
4PCS
F
1PC
Back panel
HI
1PC
Front metal bar-left
G
2PCS
Plastic feet
Side panel
1PC
Front metal bar-right
1PC
PVC curtain
1PC
Front panel

PARTS
04
J K L
2PCS
2PCS
Roof Roof supporter
M N
1PC
1PC
Left panel of porch
2PCS
Bottom panel
Roof cap
QR
P
1PC
Left metal bar of porch
1PC
Bottom panel of porch
1PC
Right metal bar of porch
O
1PC
Right panel of porch

PRODUCT ASSEMBLY
01
02
05
Attach the plastic feet Part C to the metal bars Part A & B with the
buckle.
C
B
C
A
Attach the panel Part E & Part D with the metal bars Part A & B by
4xP2 screws.
D
E
P2
X4
E

PRODUCT ASSEMBLY
03
04
06
Screw the curtain Part I to the INSIDE of Part H by 3xP5 screws.
P5X
3
I
H
Attach the plastic feet Part C to the metal bars Part F & G with the
buckle.
F
C
G
C

PRODUCT ASSEMBLY
05
06
07
Attach the Part H to the house with the metal bars Part F & G by 4XP2
screws.
P2
X4
Put down the bottom floor Part J.
Jx2
H
E
E

PRODUCT ASSEMBLY
07
08
08
Screw Part L INSIDE of Part Kby 6XP4 screws.
(There are pre-drilled holes on Part K).
Attach Part Kto the house by 8xP3 screws.
Kx2
P3
X8
K
Lx2
P4
X6

PRODUCT ASSEMBLY
09
09
Attach Part M to the roof by 4xP5 screws.
P
5
X4
10
Attach the panel Part N & Part O with the metal bars Part P & Q by
2xP5 screws on each side.
P5
X2
M
NO
P5
X2
Q
P

PRODUCT ASSEMBLY
11
10
Attach Part R by 4xP1 bolts.
Finish
12
Attach the porch to the house using the P7connection strap by 3xP6
screws on each side.
R
P1
X4
P7
X2
P6
X6

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.