aivituvin AIR 25 User manual

INSTRUCTION
MANUAL
AIR 25
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
P5
02
M3.0x30mm SCREW
M3.0x12mm SCREW
M3.5x40mm SCREW
4PCS+1 spare
4PCS+1spare
1PC
P6
1PC
26PCS+1 spare
Eye hook
1PC
Chewing Toy for Gift
Bowl

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
DEF
G
1PC
1PC 1PC
03
HI
1PC
1PC
1PC
1PC
1PC
Platform
Front panel Left panel Right panel
Platform
Back panel
1PC
Platform Platform Platform

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
J K L
M
04
1PC
1PC
Layer Ramp Sliding tray
Top cover panel
1PC 1PC
N
Platform
1PC

PRODUCT ASSEMBLY
01
02
05
Put the platform Part E, F, G, H, I, N in the show position and
ready for the next step's assemble.
Attach Part B Part C and Part D by 4xP2 screws.
P2X
4
H
C
G
B
D
I
E
NF

PRODUCT ASSEMBLY
03
04
06
①Screw the platform Part E ,F ,G ,H, I, N one by one to the inside
of back panel Part D by 12xP2 screws as show on the picture.
②Screw the platform Part F from right panel by 2xP2 screws.
①Screw the platform Part G & Part I form left panel by 2xP2
screws each .
②Put the ramp Part K on platform Part I as show on picture.
P2
X2
K
P2
X4
P2
X12

PRODUCT ASSEMBLY
05
06
07
①Attach front panel A by 4xP1 screws.
①Attach the top cover panel Part M to the house by 4xP3 screws.
L
P1X2
P3X4
M
②Slide in the tray Part L.
A
②Notice to level up with the hinges.
P1X2

PRODUCT ASSEMBLY
07
08
①Screw the eye hook P4 to the left panel Part B, tie the rope
on one side of roof, the other side of hook to make the roof
open.
②Put the bowl Part P6 and chewing toy Part P5 inside the cage
in anywhere you want.
P6X1
P4X1
P5X1

PRODUCT ASSEMBLY
08
09
Attach the Part J to bottom shelf of Part B and Part C by 4xP2
screws.
P2X4
J

HELP CENTER
[email protected]
Question about your product? we're here to help contact us via
Returns & Refunds
?
Product AssemblyOrders FAQProduct inquiry
THANK YOU
Thanks for your support to Aivituvin.
Your satisfaction is our #1 priority.
Once the items are received, opened, and deemed to be faulty
or other problems.
Pls contact us at [email protected] for the solution.
We will feedback to you within 24 hours.
If you are happy with the shopping ,welcome to share photos
and thoughts with others .
www.aivituvin.com
10

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.