aivituvin AIR 49 User manual

I
AIR 49
www.aivituvin.com
NSTRUCTION
MANUAL

Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure
every 90 days.
Fasten screws loosely during initial assembly. Do not
fully tighten screws until the item is completely
assembled.
Do not use or store this item in the proximity of open
flame or flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop
using this product until repairs are made and/or factory
replacement parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future
NOTICE
01

02
PHILLIPS
SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY
M6.0x55 mm BOLT
4PCS+1 spare
M3.5x60 mm SCREW
22PCS+1 spare
M3.5x40 mm SCREW
28PCS+1 spare
M3.5x35 mm SCREW
38PCS+1 spare
TOOLS REQUIRED
HARDWARE
P1 P2
P3 P4
P5 P6
M3.5x25 mm SCREW
8PCS+1 spare
M3.0x16 mm SCREW
12PCS+1 spare
P5 P6
P5 P6
1PC 1PC
P7 P8
Metal Rod

03
PRODUCT ASSEMBLY
Front Coop
Nest box
Front Pen

04
A B
C
G1 G2
H
PARTS
Right panel of coop-down
1PC
Ventilation panel
2PCS
Left/Right panel of coop-upper
2PCS
Left panel of nest box
1PC
Front panel of coop
1PC 1PC Left panel of coop-down
D
E F
Back panel of coop
1PC
1PC 1PC
Right panel of nest box Bottom panel of nest box

I
J
PARTS
05
1PC 2PCS
K
2PCS
Perch
OP Q
2PCS
Coop roof-M
2PCS 1PC
Perch
2PCS Divider panel of nest box
2PCS
Roof panel of nest box
1PC
LM N
Front panel of nest box Slide out tray
Coop roof-L
Roof cap

06
PARTS
R
S
Front panel of pen
1PC 1PC
T
1PC
Side panel of pen
U
V
Top panel of pen
1PC 1PC
PVC Waterproof Strip
Back panel of pen

PRODUCT ASSEMBLY
01
Attach Part C and F by 2xP2 , repeat on Part D and F.
07
CD
F
02
Attach Part A & B to the side of the coop panel by 16xP3.
A
P2 X2
B
P2 X2
F
P3 X8
P3 X8

PRODUCT ASSEMBLY
03
08
04
Attach Part E to the side by 4xP3 on each.
J
Put in 2pcs of perch Part K and slide in 2pcs of tray Part J.
P3 X8
E
J
Kx2

PRODUCT ASSEMBLY
05
06
Attach Part G1 & G2 to Part C by 2xP1 on each side.
09
P1 X4
G1
①Attach Part I by 2xP4 on each side.
②Put in the bottom panel Part H and then insert the divider panel Part P to the bottom.
P4 X4
I
H
G2
P

PRODUCT ASSEMBLY
08
07
Attach Part Q by 6xP6.
10
P6 X6
Q
Attach P7 by 2xP6.
P6 X2
P7 X1

PRODUCT ASSEMBLY
09
Attach Part R & S to the coop by 6xP2 on each side. 
10
11
Attach Part O to the pen panel by 2xP4 on each side.
R
S
P2 X12
P4 X2
O
P4 X2

PRODUCT ASSEMBLY
12
11
①Screw P8 to Part R by 4xP6.
②Screw Part T by 2xP2.
③Attach Part T to Part R & S by 4xP3.
12
P2 X2
T
P4 X14
U
P3 X4
P8 X1
P6 X4
Attach top panel of pen Part U by 14xP4.

PRODUCT ASSEMBLY
13
14
Attach the roof Part L & M by 16xP4.
13
P4 X16
P5 X4
N
MM
L
①Attach the roof cap Part N by 4xP5.
P2 X4
Screw the 4xP2 accordingly.②

PRODUCT ASSEMBLY
15
14
P5 X4
V
Attach the Part V by 4 x p5 screws.

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting from
the incorrect attachment,improper use,inadequate miantenance,or neglect of this