Alcatel Temporis IP100 Instruction Manual

Business IP Range
Administration and Provisioning Manual
Temporis IP100/IP150/IP300/IP700G
Alcatel IP2015
Conference IP1850
FW versions 1.0.6B or newer

Business IP Range Administration and Provisioning Guide ed 1.0 2/175
Congratulations on your purchase of this Alcatel product. Before using it, please read
Important Safety Information on page 174 of this manual. Please thoroughly read this
manual for all the feature operations and troubleshooting information necessary to install
and operate your new product. You can also visit our website at alcatel-business.com.
This manual provides instructions for using Temporis IP100/IP150/IP300/IP700G, Alcatel
IP2015, Conference IP1850 models with software version 1.0.6B or newer. Instructions
are also applicable for the administration of IP315, IP370, IP715G and IP770G bundles
with cordless accessories. See page 49 for instructions on checking the software version
on the desktop phones, or page 61 to do the same on the cordless handsets.
Parts checklist
Your telephone package contains the following items. Save your sales receipt and original
packaging in the event warranty service is necessary.
Temporis
IP100
IP150
IP300
Temporis
IP700G
Alcatel
IP2015
Conference
IP1850
Quick User Guide




Handset and handset cord


Phone base/main unit




Foot stand


Wall mount accessory



Ethernet cable




PSU or power injector


Cordless handset

Cordless microphones

Batteries or battery pack


Charging cradle with PSU


Business IP Range Administration and Provisioning Guide ed 1.0 3/175
Table of contents
Parts checklist ................................................................................................... 2
Table of contents................................................................................................... 3
Introduction.......................................................................................................... 6
Audience........................................................................................................... 6
Related documents............................................................................................. 6
Getting started...................................................................................................... 7
Temporis IP100 ................................................................................................. 8
Quick reference guide...................................................................................... 8
Programmable Keys ........................................................................................ 9
Temporis IP150 ................................................................................................10
Quick reference guide.....................................................................................10
Programmable Keys .......................................................................................11
Temporis IP300 ................................................................................................12
Quick reference guide.....................................................................................12
Programmable Keys .......................................................................................13
Temporis IP700G ..............................................................................................14
Quick reference guide.....................................................................................14
Programmable Keys .......................................................................................15
Alcatel IP2015 ..................................................................................................16
Quick reference guide.....................................................................................16
Conference IP1850 ............................................................................................18
Quick reference guide.....................................................................................18
Network Requirements ..........................................................................................20
Installation ..........................................................................................................21
Temporis IP100 and IP150 installation ................................................................21
Temporis IP300 installation ................................................................................24
Temporis IP700G installation ..............................................................................26
Alcatel IP2015 installation ..................................................................................28
Conference IP1850 installation............................................................................29
Configuring your device.........................................................................................32
Minimum configuration ......................................................................................32
Verifying the installation: idle Screen...................................................................32
Configuring Programmable keys..........................................................................33
Functions available to programmable keys ........................................................33
LED behavior.................................................................................................34
Adding a Custom Logo .......................................................................................36
Idle screen logo behavior ................................................................................36
Logo specifications .........................................................................................36
Uploading a custom logo.................................................................................37
Custom logo user interactions .........................................................................37
Customizing Softkeys ........................................................................................38
Custom Soft Key Configuration File Settings......................................................40
Setting up Temporis IP100 phone .......................................................................41
Using the phone “star codes” ..........................................................................41
Find IP address..............................................................................................41
Static IP configuration ....................................................................................41
VLAN configuration ........................................................................................42
Enable VLAN .................................................................................................42
Disable VLAN.................................................................................................42
Setting up IP300/IP700G with IP70H accessory DECT headset ...............................43
Register a DECT headset.................................................................................43
Deregister a DECT headset .............................................................................43
Deregister a DECT headset without a deskset....................................................44
Deskset functionality with an IP70H DECT headset.............................................44
Setting up IP300/IP700G with IP15 accessory DECT handset ..................................44

Business IP Range Administration and Provisioning Guide ed 1.0 4/175
Register a DECT handset ................................................................................44
Deregister a DECT handset .............................................................................45
Deskset functionality with an IP15 DECT handset...............................................45
Setting up IP2015 with multiple IP15 handsets .....................................................46
Managing additional IP15 handsets ..................................................................46
Assigning sip accounts to IP15 handsets ...........................................................47
IP2015 functionality with IP15 DECT handsets ...................................................47
Using Menu in your desktop phone .........................................................................48
Features ..........................................................................................................48
Status..............................................................................................................49
Viewing Line status ........................................................................................50
Customizing your phone with User Settings menu .................................................51
Using the Admin Settings menu ..........................................................................53
Network Setting.............................................................................................54
Line Menu .....................................................................................................57
Provisioning Menu..........................................................................................58
Using Menu in your IP15 cordless handset ...............................................................59
User functionality submenus...............................................................................59
Status..............................................................................................................61
User Settings....................................................................................................62
Admin Settings .................................................................................................63
Network settings............................................................................................64
Provisioning Menu..........................................................................................66
Using the WebUI ..................................................................................................68
Saving Your Settings .........................................................................................70
Status .................................................................................................................71
System ...............................................................................................................72
SIP Account Management...................................................................................72
Dial Plan ..........................................................................................................74
Call Settings .....................................................................................................86
User Preferences ...............................................................................................89
Programmable Keys ..........................................................................................92
Memory Keys: Speed Dial ..................................................................................97
Signaling Settings .............................................................................................98
Ringer Settings .................................................................................................99
Paging Zone ...................................................................................................101
Handset settings .............................................................................................103
Account assignment .....................................................................................103
Handset name .............................................................................................104
Network ............................................................................................................106
Basic Network Settings ....................................................................................106
Advanced Network Settings ..............................................................................107
Contacts............................................................................................................110
Local Directory................................................................................................110
Directory Import/Export ...............................................................................112
Directory Import using configuration files........................................................113
Black List .......................................................................................................114
Black List Import/Export ...............................................................................114
Black List Import using configuration files .......................................................115
LDAP Directory ...............................................................................................116
Broadsoft Directory .........................................................................................119
Call History ....................................................................................................120
Servicing ...........................................................................................................121
Reboot...........................................................................................................121
Time and Date ................................................................................................121
Firmware Upgrade...........................................................................................124
Provisioning....................................................................................................127

Business IP Range Administration and Provisioning Guide ed 1.0 5/175
Security .........................................................................................................133
Certificates.....................................................................................................135
System Logs...................................................................................................137
Provisioning Using Configuration Files ...................................................................139
Resynchronization—Configuration File Checking ..................................................139
The Provisioning Process ..................................................................................139
Phone Restart .................................................................................................140
Configuration File Types ...................................................................................141
Data Files.......................................................................................................141
Configuration File Guide ...................................................................................142
Guidelines for the MAC-Specific Configuration File............................................142
Securing Configuration Files with AES Encryption .............................................142
Setting Up Provisioning .......................................................................................144
Soft Keys...........................................................................................................145
Desktop phone soft keys ..................................................................................145
IP15 cordless handset soft keys ........................................................................148
Appendix A: Configuration File Settings .................................................................150
“sip_account” Module: SIP Account Settings .......................................................150
“network” Module: Network Settings .................................................................153
“profile” Module: security settings .....................................................................155
“provisioning” Module: Provisioning Settings.......................................................155
“time_date” Module: Time and Date Settings......................................................156
“log” Module: Log Settings ...............................................................................157
“remoteDir” Module: Remote Directory Settings ..................................................158
“web” Module: Web Settings.............................................................................159
“user_pref” Module: User Preference Settings .....................................................159
“call_settings” Module: Call Settings ..................................................................161
“pfk” Module: Programmable Feature Key Settings ..............................................163
“speed_dial” Module: Speed Dial Settings ..........................................................164
“file” Module: Imported File Settings .................................................................164
“tone” Module: Tone Definition Settings .............................................................165
“ringersetting” Module: distinctive ringing settings ..............................................166
“page_zone” Module: Paging Zone Settings ........................................................167
“softkey” Module: Custom Soft Key Settings.......................................................168
“hs_settings” Module: Handset management Settings..........................................169
Appendix B: Time Zones......................................................................................170
Maintenance ......................................................................................................173
Important Safety Information ..............................................................................174
CE Declaration of conformity................................................................................175
GPL License Information......................................................................................175

Business IP Range Administration and Provisioning Guide ed 1.0 6/175
Introduction
This administration and provisioning guide contains detailed instructions for installing and
configuring your Temporis IP100, Temporis IP150, Temporis IP300 and its bundles
with cordless accessories, IP700G and its bundles with cordless accessories, Alcatel
IP2015 and Conference IP1850. Please read this guide before installing the telephone.
Audience
This guide is written for installers and system administrators. It assumes that you are
familiar with networks and VoIP, both in theory and in practice. This guide also assumes
that you have ordered your IP PBX service and selected which PBX features you want to
implement. This guide does not reference specific IP PBX services except for features or
parameters that have been designed for a specific service. Please consult your service
provider for recommended switches, routers, and firewall and NAT traversal settings, and
so on.
As the product range becomes certified for IP PBX services, we may make available
interoperability guides for those specific services. These will recommend second-party
devices and settings, along with deskset-specific configurations for optimal performance
with those services. Contact your distributor or installer for the latest updates.
Related documents
Quick Start Guide contains a quick reference guide to the device external features and
brief instructions on connecting it to a working IP PBX system. This document exists in
different language versions.
Connection sheet contains connection instructions in multiple languages on a single
document.
Documents are available from our website at alcatel-business.com.

Business IP Range Administration and Provisioning Guide ed 1.0 7/175
Getting started
Alcatel business IP range includes full-featured business phones designed to work with
popular SIP telephone (IP PBX) services. Once you have ordered and configured your SIP
service, the device enables you to make and receive calls as you would with any other
business phone. The phones provide calling features like hold, transfer, conferencing,
speakerphone, intercom, quick dial numbers and one-touch voicemail access.
Depending on the models, there are one or two network ports, known as LAN port and
PC port, at the back of the deskset. The LAN port allows the phones to connect to the IP
PBX via a router. The PC port is for another device such as a personal computer to
connect to the Ethernet network through the deskset.
You can configure the terminal using its own menus, a browser-based interface called the
WebUI, or an automatic provisioning process (see Provisioning Using Configuration Files
on page 139).
The WebUI enables you to configure the device using a PC that is connected to the same
Local Area Network. The WebUI resides on the phone, and is updated with any firmware
updates.
Desktop phones have dual-function programmable keys to which quick-dial numbers,
lines, or other functions like monitoring other extensions in the system can be assigned.
Programmable keys have two-color LEDs to indicate call activity.
These telephones support caller ID with call waiting service and can store up to 200 Call
Log entries. Local and network phonebooks like LDAP are supported.
DECT enabled models (IP300, IP700G, IP2015, IP1850) additionally offer mobility.
We will briefly tour you around the different models.

Business IP Range Administration and Provisioning Guide ed 1.0 8/175
Temporis IP100
Temporis IP100 is an entry level business phone. Its features include:
On hook dialing, headset, hold and mute
1 sip registration
2 active SIP sessions
3-way conferencing, N-way network conferencing
10 dual-function programmable keys, 5 with bicolor led and 2 pages
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Single 10/100 Mbps Ethernet ports
Power over Ethernet
100-entry Call Log and local phonebook accessible from WUI
Quick reference guide
The controls you will need to use to manage the phone and external features that are
relevant to installation and configuration are described below.
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:
Press to access a line to make a call
Press to dial a monitored extension or a
quick-dial number
Press to answer a ringing call on any line
or monitored extension
See also Programmable Keys on page 13.
Directory card
To write names on the directory card, pull out the directory card
from under the plastic cover.
A fill-in printable template is available at extranet.alcatel-
business.com
Access F11 To F20
Press F5 to switch to the second possible value of a programmable key.
Note: This is the default setting. You can configure F5 to perform other
functions
RJ9 Corded headset input (on side)
Conference
Press to initiate a conference
with a new call, or to set up a
conference with two already
established calls
Redial
Press to redial last called number
Voicemail
Press to call to your Voicemail
Transfer
Press to initiate a call transfer
towards a new call, or to bridge two
already established calls

Business IP Range Administration and Provisioning Guide ed 1.0 9/175
The following table includes some useful star codes to help you quickly configure IP100.
To invoke a command simply dial the sequence in on-hook mode.
Purpose
Command
Remarks
IP address
announcement
*123456#
Static IP
configuration
*782842#x*x*x*x#y*y*y*y#z*z*z*z#
x*x*x*x = IP address
y*y*y*y = subnet mask
z*z*z*z = default gateway
Switch VLAN off
* 7 8 2 8 4 3 # 0 # #
Switch VLAN ON
plus edit VID
* 7 8 2 8 4 3 # 1 # ???? #
???? = VLAN ID
Programmable Keys
The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, or access to other functions like Call forward, for example.
Keys are numbered from top left to bottom left, and then top right to bottom right. Note
keys 11 to 20 are virtual, ie they are accessed when key 5 is configured as Access to
F11-F20
Key Number
Setting
1
Line 1*
2
Line 1
3
Quick dial
4
Quick dial
5
Access to F11-F20
6-14
Quick dial
15
Access to F11-F20
16-20
Quick dial
* You can assign more than one key to a certain type of function. For example, you can
configure keys 1 and 2 to access Line 1. Label the keys appropriately for deskset users
after configuration. A printable fill-in template is available for download at
extranet.alcatel-business.com
To assign functions to programmable keys, please see Programmable Keys on page 92.

Business IP Range Administration and Provisioning Guide ed 1.0 10/175
Temporis IP150
Temporis IP150 is an entry level business phone. Its features include:
2.5-inch backlit Liquid Crystal Display
Speakerphone, Headset, Hold and Mute
Up to 2 SIP Registrations
Up to 6 active SIP sessions
3-way conferencing, N-way network conferencing
10 dual-function programmable keys, 5 with bicolor led
Customizable softkeys and logo
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Dual 10/100 Mbps Ethernet ports with Power over Ethernet
100-entry Call Log, local and LDAP phonebooks
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
Navigation key also provides shortcuts to the following functions in idle mode:
MENU
Press to enter the menu.
CANCEL
While in a menu, press to cancel an
operation and exit the menu.
In idle mode, long press to reboot
the phone
OK
Press to select a menu item or
save an entry or setting.
NAVIGATION KEY
While in menus, press 
or to scroll through the
menu, highlight items or
change settings.
Press or to
navigate through softkey
pages
While entering names or
numbers, press or to
move the cursor left or
right.
Line
Press to change
dial-out account
(shown if second
sip account is
registered only)
Hold key
In conversation, press to
place active call on hold.
In idle mode, press to
quickly access Network
Status menu
Settings
Press to quickly access User
Settings menu
Redial
Press to access redial list
Voicemail
Press to access Voicemail
menu

Business IP Range Administration and Provisioning Guide ed 1.0 11/175
The deskset external features that are relevant to installation and configuration are
described below.
Programmable Keys
The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, or access to other functions like Call forward, for example.
Keys are numbered from top left to bottom left, and then top right to bottom right. Note
keys 11 to 20 are virtual, ie they are accessed when key 5 is configured as Access to
F11-F20
Key Number
Setting
1
Line 1*
2
Line 1
3
Quick dial
4
Quick dial
5
Access to F11-F20
6-14
Quick dial
15
Access to F11-F20
16-20
Quick dial
* You can assign more than one key to a certain type of function. For example, you can
configure keys 1 and 2 to access Line 1, and keys 3 and 4 to access Line 2. Label the
keys appropriately for deskset users after configuration. A printable fill-in template is
available for download at extranet.alcatel-business.com
To assign functions to programmable keys, please see Programmable Keys on page 92
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:
Press to access a line to make a call
Press to dial a monitored extension or a quick-
dial number
Press to answer a ringing call on any line or
monitored extension
See also Programmable Keys on page 13.
Directory card
To write names on the directory card, pull out the directory card
from under the plastic cover.
A fill-in printable template is available at extranet.alcatel-
business.com
Access F11 To F20
Press F5 to switch to the second possible value of a programmable key.
Note: This is the default setting. You can configure F5 to perform other
functions
RJ9 Corded headset input (on side)

Business IP Range Administration and Provisioning Guide ed 1.0 12/175
Temporis IP300
Temporis IP300 is a mid-range business phone with cordless capabilities. Its features
include:
2.5-inch backlit Liquid Crystal Display
Speakerphone, Headset, Hold and Mute
Up to 3 SIP Registrations
Up to 6 active SIP sessions
3-way conferencing, N-way network conferencing
IP70H DECT headset and IP15 DECT handset support
12 dual-function programmable keys with bicolor led
Customizable softkeys and logo
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Dual 10/100 Mbps Ethernet ports
Power over Ethernet enabled
200-entry Call Log, local and LDAP phonebooks
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
Navigation key also provides shortcuts to the following functions in idle mode:
MENU
Press to enter the menu.
CANCEL
While in a menu, press to
cancel an operation and exit
the menu.
In idle mode, long press to
reboot the phone
OK
Press to select a menu item or
save an entry or setting.
NAVIGATION KEY
While in menus, press 
or to scroll through the
menu, highlight items or
change settings.
Press or to
navigate through softkey
pages
While entering names or
numbers, press or to
move the cursor left or
right.
Line
Press to change
dial-out account
(shown if second
sip account is
registered only)
Hold key
In conversation, press to
place active call on hold.
In idle mode, press to
quickly access Network
Status menu
Call Log
Press to quickly access call
lists menu

Business IP Range Administration and Provisioning Guide ed 1.0 13/175
The deskset external features that are relevant to installation and configuration are
described below.
Programmable Keys
The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, or access to other functions like Call forward, for example.
Key Number
Setting
1
Line 1*
2
Line 1
3-12
Quick dial
* You can assign more than one key to a certain type of function. For example, you can
configure keys 1 and 2 to access Line 1, and keys 3 and 4 to access Line 2. Label the
keys appropriately for deskset users after configuration.
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:
Press to access a line to make a call
Press to dial a monitored extension or a quick-dial number
Press to answer a ringing call on any line or monitored
extension
See also Programmable Keys on page 13.
Directory card
To write names on the directory card, pull out the
directory card from under the plastic cover.
A fill-in printable template is available at
extranet.alcatel-business.com
Access F13 to F24
Press this key to switch to the second possible value of a programmable
key.
2.5mm corded headset input (on
side)
Redial
Press to access redial list
Voicemail
Press to access Voicemail
menu

Business IP Range Administration and Provisioning Guide ed 1.0 14/175
Temporis IP700G
Temporis IP700G is a feature business phone with cordless capabilities. Its features
include:
3.5-inch backlit Liquid Crystal Display
Speakerphone, Headset, Hold and Mute
Up to 6 SIP Registrations
Up to 6 active SIP sessions
3-way conferencing, N-way network conferencing
IP70H DECT headset and IP15 DECT handset support
16 dual-function programmable keys with bicolor led
Customizable softkeys and logo
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Dual 10/100/1000 Mbps Ethernet ports
Power over Ethernet enabled
200-entry Call Log, local and LDAP phonebooks
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
MENU
Press to enter the menu.
CANCEL
While in a menu, press to
cancel an operation and exit
the menu.
In idle mode, long press to
reboot the phone
OK
Press to select
a menu item or
save an entry
or setting.
NAVIGATION KEY
While in menus, press 
or to scroll through the
menu, highlight items or
change settings.
Press or to
navigate through softkey
pages
While entering names or
numbers, press or to
move the cursor left or
right.
Line
Press to change
dial-out account
(shown if more
than one sip
account is
registered only)
Hold key
In conversation, press to
place active call on hold.
In idle mode, press to
quickly access Network
Status menu
Call Log
Press to quickly
access call lists
menu
Settings
Press to access
Settings menu

Business IP Range Administration and Provisioning Guide ed 1.0 15/175
The deskset external features that are relevant to installation and configuration are
described below.
Programmable Keys
The table below lists the default settings for the programmable keys. The key
assignments on your phone may be different. Some keys may be programmed as Quick
Dial keys, or access to other functions like Call forward, for example.
Key Number
Setting
1
Line 1*
2
Line 1
3-16
Quick dial
* You can assign more than one key to a certain type of function. For example, you can
configure keys 1 and 2 to access Line 1, and keys 3 and 4 to access Line 2. Label the
keys appropriately for deskset users after configuration.
Programmable keys
Can be programmed to perform various functions or access
various features.
For example:
Press to access a line to make a call
Press to dial a monitored extension or a quick-dial number
Press to answer a ringing call on any line or monitored
extension
See also Programmable Keys on page 15.
Directory card
To write names on the directory card, pull out the
directory card from under the plastic cover.
A fill-in printable template is available at
extranet.alcatel-business.com
Access F13 to F24
Press this key to switch to the second possible value of a programmable
key.
2.5mm corded headset input (on
side)

Business IP Range Administration and Provisioning Guide ed 1.0 16/175
Alcatel IP2015
Alcatel IP2015 is a multiline multi-handset IP DECT system. Basic package includes one
base and one handset. IP2015 features include:
Out-of-sight, wall mountable, PoE enabled base station
Up to 6 independent SIP Registrations
Up to 6 IP15 handsets supported per base
Up to 4 concurrent wideband calls per base
3-way conferencing, N-way network conferencing
Shared and LDAP phonebooks
10/100 Mbps Ethernet port
As for the IP15 handset:
1.9-inch backlit Liquid Crystal Display
Wideband audio, hands free
Headset jack and belt clip
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
Access to local, shared and LDAP phonebooks
Easy access to business functions
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
Line
Press left softkey in idle
mode to select dial-out
account
MENU
Press right softkey in idle mode
to enter the menu.
OK
Press to select a menu
item, display available
options, toggle among two
options or save an entry or
setting.
CONF
Press to start a 3 way call
Transfer
Press to start a call transfer
Talk
Press to
answer or
start a call
Call Hold
Press to put active call
on hold
Talk off/Power
Press to release a call.
Or to switch on/off
(long press)
Intercom
Press to start an internal call to
other handsets
NAVIGATION KEY
While in menus, press or to
scroll through the menu,
highlight items or change
settings. While entering names or
numbers, press or to move
the cursor left or right.

Business IP Range Administration and Provisioning Guide ed 1.0 17/175
Although there are often dedicated menu items, navigation key also provides shortcuts to
the following functions:
The elements of the base unit you need to consider are the following:
Status
Power
VoIP
Connected to router and IP
address assigned
ON
IP address not available
Flash
All accounts registered
ON
At least one active account
unregistered
OFF
DECT registration mode
Flash
Flash
DIR/VOL +
In idle mode press to quickly access
Contacts menu
When in a call press to increase
received audio volume
At incoming call press to increase
ringer level
CID/VOL -
In idle mode press to quickly
access Call Logs menu
When in a call press to
decrease received audio
volume
At incoming call press to
decrease ringer level
RESET
Press with a paper clip or sharp
object to restore the unit to its
default settings.
Paging/Registration button
Press to locate all registered
handsets.
Long press to set the base unit
into DECT registration mode
Power and VoIP LEDs
Status indication is as follows:

Business IP Range Administration and Provisioning Guide ed 1.0 18/175
Conference IP1850
Conference IP1850 is an advanced audioconference device. Its features include:
Wideband, high power speaker
2 embedded microphones
4 detachable wireless microphones with built-in charging cradle
2.5-inch backlit Liquid Crystal Display
Up to 3 SIP Registrations
Up to 6 active SIP sessions
3-way conferencing, N-way network conferencing, hold, mute, transfer
USB connector for PC audio device mode
Customizable softkeys and logo
10 speed dial numbers (long press dial keypad)
Message Waiting alert LED
10/100 Mbps Ethernet ports
Power injector
200-entry Call Log, local and LDAP phonebooks
Quick reference guide
The controls you will need to use to configure the phone manually are described below.
Line
Press to change dial-out
account (shown if more
than one sip account is
registered only)
PC SPK
Once connected to your PC via USB,
press to use IP1850 as audio device
with your favorite application:
Skype, Lync, etc
Visual indicator (4)
Check the table on
next page for different
LED color and cadence
meaning
MENU
Press to enter the menu.
OK
Press to select a menu item
or save an entry or setting.
HOLD
In conversation, press to
place active call on hold.
CANCEL
While in a menu, press to
cancel an operation and exit
the menu.
MUTE
In conversation, press to
disable all microphones.
Press again to enable.
Talk ON/OFF
Press to launch or answer a
call. Press again to release
a call.
NAVIGATION KEY
While in menus, press or 
to scroll through the menu,
highlight items or change
settings.
Press or to navigate
through softkey pages
While entering names or
numbers, press or to
move the cursor left or right.

Business IP Range Administration and Provisioning Guide ed 1.0 19/175
On the wireless microphones you have the following elements:
Visual indicator
Check the table below for
color/ cadence meaning
MUTE
In conversation, press to
temporarily deactivate
(mute) all microphones.
Press again to enable
(unmute).
Remove and activate mic
Push gently on the arrow area to remove
the microphone from its cradle.
Please note wireless mics are deactivated
while on their cradle. For best user
experience, if users are located at or
farther than 1m from the main unit, it is
recommended to activate and use these
mics by detaching them from their cradle.

Business IP Range Administration and Provisioning Guide ed 1.0 20/175
Network Requirements
A switched network topology is recommended for your LAN (using standard 10/100 or
10/100/1000 Ethernet switches).
The office LAN infrastructure should use Cat.-5 (or better) cable for 10/100, and Cat.-6
for 10/100/1000.
The LAN connections to the devices(s) should all be wired. However, wireless connections
to other devices (such as laptops) in your office will not impede performance.
All devices must reside on a single subnet. A DHCP server is recommended and must be
on the same subnet as the devices so that IP addresses can be auto-assigned. In most
cases, your network router will have a Dynamic Host Configuration Protocol (DHCP)
server that will automatically assign IP addresses to clients. By default, the phone has
DHCP enabled for automatic IP address assignment.
If no DHCP server is present, you can assign static IPs to devices. If you do not have a
DHCP server or do not manually assign static IPs, you will not be able to access the
WebUI and/or enable automatic time updates from an NTP server.
Unless you want to manually set the system clock and manually or locally upgrade
software, an Internet connection to the LAN is required.
A DNS server is recommended to resolve the path to the Internet and to a server for
firmware and configuration updates.
If necessary, the system administrator can also download upgrade files and use the
WebUI to update the device firmware and/or configuration settings manually.
For users whose computers require a GigE Ethernet frame rate (a gigabit per second),
use either IP700G phone or separate Ethernet connections for the deskset and the
computer.