Amazone AD-P 3001 Special 850 User manual
Operating manual
az
Pack top seed drills
AD-P 3001/3501/4001 Special 850
AD-P 3001/3501/4001 Special 1250
MG6093
BAH0095-2 11.17
Please read and observe this
operating manual before initial
operation of the implement!
Keep it in a safe place for future use!
en
2 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
READING THE INSTRUCTION
manual and to adhere to it should not appear to
be inconvenient and superfluous as it is not
enou
g
h to hear from others and to realise that a
machine is good, to buy it and to believe that now
everything would work by itself. The person con-
cerned would not only harm himself but also
make the mistake of blaming the machine for the
reason of a possible
f
ailure instead of himself. In
order to ensure a good success one should go into
the mind of a thing or make himself familiar with
every part of the machine and to get acquainte
d
with its handling. Only this way, you would be
satisfied both with the machine as also with
yourself. To achieve this is the purpose of this in-
struction manual.
Leipzig-Plagwitz 1872.
Identification data
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 3
Identification data
Please insert the identification data of the implement. The identifica-
tion data are arranged on the rating plate.
Implement number (ten digits):
Type:
Year of manufacture:
Basic weight (kg):
Permissible total weight (kg):
Manufacturer address
AMAZONEN-WERKE
H. DREYER GmbH & Co. KG
Postfach 51
D-49202
Tel.:
E-mail:
Hasbergen, Germany
+ 49 (0) 5405 50 1-0
Spare part ordering
Spare parts lists are freely accessible in the spare parts portal at
www.amazone.de.
Please send orders to your AMAZONE dealer.
Formalities of the operating manual
Type: AD-P 30/35/4001 SPECIAL
Document number: MG6093
Compilation date: 11.17
Copyright AMAZONEN-WERKE H. DREYER GmbH & Co. KG, 2017
All rights reserved.
Reprinting, even of sections, only possible with the approval of
AMAZONEN-WERKE H. DREYER GmbH & Co. KG.
Foreword
4 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
Foreword
Dear Customer,
You have chosen one of the quality products from the wide product range of AMAZONEN-WERKE,
H. DREYER GmbH & Co. KG. We thank you for your trust in our products
On receiving the implement, check to see if it has been damaged during transport or if parts are miss-
ing. Using the delivery note, check that the implement has been delivered in full, including any special
equipment ordered. Damage can only be rectified if problems are claimed immediately.
Before initial operation, read and observe this operating manual, and particularly the safety infor-
mation. Only after careful reading will you be able to benefit from the full scope of your newly pur-
chased implement.
Please ensure that all the implement operators have read this operating manual before they put the
implement into operation.
Should you have any questions or problems, please consult this operating manual or contact your
local service partner.
Regular maintenance and timely replacement of worn or damaged parts increases the service life of
your implement.
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 5
1User information........................................................................................10
1.1Purpose of the document.......................................................................................................10
1.2Locations in the operating manual.........................................................................................10
1.3Diagrams................................................................................................................................10
2General safety instructions.......................................................................12
2.1Obligations and liability ..........................................................................................................12
2.2Representation of safety symbols..........................................................................................14
2.3Organisational measures .......................................................................................................15
2.4Safety and protective equipment ...........................................................................................15
2.5Informal safety measures.......................................................................................................15
2.6User training...........................................................................................................................16
2.7Safety measures in normal operation ....................................................................................17
2.8Danger from residual energy .................................................................................................17
2.9Maintenance and repair work, fault elimination .....................................................................17
2.10Design changes .....................................................................................................................18
2.10.1Spare and wear parts and aids..............................................................................................19
2.11Cleaning and disposal............................................................................................................19
2.12User workstation ....................................................................................................................19
2.13Warning symbols and other labels on the implement............................................................20
2.13.1Position of warning symbols ..................................................................................................25
2.14Dangers in case of non-compliance with the safety instructions ...........................................26
2.15Safety-conscious working ......................................................................................................26
2.16Safety information for users...................................................................................................27
2.16.1General safety instructions and accident prevention instructions..........................................27
2.16.2Hydraulic system....................................................................................................................31
2.16.3Electrical system ....................................................................................................................32
2.16.4Mounted implements..............................................................................................................33
2.16.5Operation of the seed drill......................................................................................................34
2.16.6Cleaning, maintenance and repair.........................................................................................34
3Upon delivery, loading and unloading the implement............................35
4Product description...................................................................................36
4.1Components of the seeding combination ..............................................................................36
4.2Components of the AD-P Special pack top seed drill ............................................................37
4.3Safety and protective equipment ...........................................................................................39
4.4Overview – Supply lines/supply cable ...................................................................................40
4.4.1Supply cable...........................................................................................................................40
4.4.2Hydraulic hose lines...............................................................................................................40
4.4.2.1Identification of the hydraulic hose lines ................................................................................41
4.5Transportation equipment ......................................................................................................42
4.6Intended use ..........................................................................................................................44
4.7Danger areas and danger points ...........................................................................................45
4.8Rating plate and CE mark......................................................................................................46
4.9Technical data........................................................................................................................47
4.9.1Technical data for calculating the tractor weight and the tractor axle loads..........................48
4.10Required tractor equipment ...................................................................................................49
4.11Noise production data ............................................................................................................49
5Layout and function...................................................................................50
5.1Control terminal for implements with ISOBUS system ..........................................................52
5.1.1TwinTerminal..........................................................................................................................52
5.2AmaDrill+ control terminal for implements without ISOBUS system .....................................53
5.3Distance measurement ..........................................................................................................53
5.3.1Measuring the distance covered with a radar device ............................................................54
6 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
5.3.2Measuring the distance covered with a pulse wheel............................................................. 54
5.4Implement documentation..................................................................................................... 54
5.5Central key ............................................................................................................................ 55
5.6Hopper and loading board..................................................................................................... 55
5.6.1Fill level control...................................................................................................................... 56
5.7Metering ................................................................................................................................ 57
5.7.1Metering roller diagram table ................................................................................................ 59
5.7.2Table – metering rollers, seed............................................................................................... 62
5.7.3Calibrating the seed rate ....................................................................................................... 64
5.7.4Automatic seed rate increase................................................................................................ 66
5.7.5Spreading seed with wide row spacing ................................................................................. 66
5.7.6Seed pre-metering................................................................................................................. 67
5.7.7Start-up ramp ........................................................................................................................ 67
5.8Blower fan ............................................................................................................................. 68
5.9Distributor head ..................................................................................................................... 70
5.9.1Seed tube monitoring ............................................................................................................ 71
5.10WS coulter............................................................................................................................. 72
5.10.1Band seeding shoe................................................................................................................ 72
5.11RoTeC Control coulter .......................................................................................................... 73
5.12Coulter pressure, seed rate increase and coulter lifting........................................................ 74
5.12.1Coulter pressure - Mechanical adjustment ........................................................................... 74
5.12.2Coulter pressure - Hydraulic adjustment............................................................................... 75
5.12.3Lifting the coulters and harrow - soil tillage without seeding................................................. 76
5.13Exact following harrow .......................................................................................................... 76
5.13.1Exact following harrow tine position ...................................................................................... 77
5.13.2Exact following harrow pressure ........................................................................................... 78
5.14Roller harrow with contour guidance..................................................................................... 79
5.15Track marker ......................................................................................................................... 80
5.16Tramlines............................................................................................................................... 81
5.16.1Examples for creating tramlines............................................................................................ 84
5.16.2Tramline rhythms 4, 6, and 8 ................................................................................................ 86
5.16.3Tramline rhythm 2 and 21 ..................................................................................................... 87
5.16.4One-sided switching .............................................................................................................. 88
5.16.5Tramline marker .................................................................................................................... 90
5.17Work floodlights..................................................................................................................... 91
5.18Camera system ..................................................................................................................... 91
6Start-up ...................................................................................................... 92
6.1Checking the suitability of the tractor .................................................................................... 93
6.1.1Calculating the actual values for the total tractor weight, tractor axle loads and tyre
load-bearing capacity, as well as the required minimum ballast weight ............................... 94
6.1.1.1Data required for the calculation (attached implement) ........................................................ 95
6.1.1.2Calculation of the required minimum ballast weight at the front GV min of the tractor
to ensure steering capability ................................................................................................. 96
6.1.1.3Calculation of the actual front axle load of the tractor TV tat................................................... 96
6.1.1.4Calculation of the actual total weight of the combined tractor and implement...................... 96
6.1.1.5Calculation of the actual rear axle load of the tractor TH tat ................................................... 96
6.1.1.6Load-bearing capacity of the tractor tyres............................................................................. 96
6.1.1.7Table ..................................................................................................................................... 97
6.2Secure the tractor / implement against unintentional starting and rolling away................... 98
6.3Hydraulic connection for the blower fan drive ....................................................................... 99
7Coupling and uncoupling the implement.............................................. 100
7.1Hydraulic hose lines ............................................................................................................ 102
7.1.1Coupling the hydraulic hose lines ....................................................................................... 102
7.1.2Uncoupling the hydraulic hose lines.................................................................................... 103
7.2Coupling implements........................................................................................................... 104
7.2.1Coupling of the tractor and soil tillage implement with ISOBUS system............................. 106
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 7
7.2.1.1Installation of the analogue working position sensor and the working position
sensor for the seed tube monitoring ....................................................................................107
7.2.2Coupling of the tractor and soil tillage implement with the AmaDrill+ control
terminal ................................................................................................................................111
7.2.2.1Installation of the digital working position sensor.................................................................112
7.2.2.2Installation of the working position sensor for seed drills with seed tube monitoring .........113
7.2.3Coupling the pack top seed drill and the soil tillage implement ...........................................114
7.2.4Uncoupling the pack top seed drill from the soil tillage implement ......................................118
7.2.5Checking the tramline track width ........................................................................................124
7.2.6Checking the tramline wheelmark width ..............................................................................124
8Settings.....................................................................................................125
8.1Folding the steps up and down ............................................................................................126
8.1.1Folding down the steps ........................................................................................................126
8.1.2Folding up the steps.............................................................................................................127
8.2Fill the seed hopper .............................................................................................................128
8.3Calibrating the seed rate......................................................................................................130
8.3.1Adjusting the automatic seed rate increase.........................................................................131
8.4Setting the blower fan speed ...............................................................................................132
8.4.1Setting the blower fan speed via the flow control valve of the tractor..................................133
8.4.2Setting the blower fan speed on tractors without flow control valve ....................................133
8.4.3Switching on the blower fan speed monitoring ....................................................................133
8.4.4Pressure relief valve with round outer contour ....................................................................134
8.4.4.1Basic setting of the pressure relief valve .............................................................................134
8.4.4.2Blower fan speed setting......................................................................................................134
8.4.5Pressure relief valve with hexagonal outer contour.............................................................135
8.4.5.1Basic setting of the pressure relief valve .............................................................................135
8.4.5.2Blower fan speed setting......................................................................................................135
8.4.6Setting the coulter pressure .................................................................................................136
8.4.6.1Mechanical coulter pressure adjustment .............................................................................136
8.4.6.2Hydraulic coulter pressure adjustment ................................................................................137
8.4.7Soil tillage without seeding - Lifting the coulters and harrow...............................................138
8.5Adjusting and checking the seed placement depth .............................................................139
8.6RoTeC Control coulter .........................................................................................................140
8.6.1Adjusting the coulter discs ...................................................................................................140
8.7Exact following harrow .........................................................................................................142
8.7.1Exact following harrow tine position.....................................................................................142
8.7.2Setting the exact following harrow pressure ........................................................................143
8.7.3Moving the exact following harrow to the working/transport position ..................................144
8.7.3.1Move the exact following harrow into working position........................................................144
8.7.3.2Moving the exact following harrow into transport position ...................................................144
8.8Roller harrow........................................................................................................................145
8.8.1Setting the pitch of the tines to the ground ..........................................................................145
8.8.2Adjusting the working depth of the harrow tines..................................................................145
8.8.3Setting the roller contact pressure .......................................................................................146
8.8.4Lifting/lowering the roller harrow..........................................................................................148
8.8.4.1Lifting the roller harrow (deactivate) ....................................................................................148
8.8.4.2Lowering the roller harrow (activate) ...................................................................................149
8.9Moving the track marker to the working / transport position ................................................150
8.9.1Moving the track marker into working position.....................................................................150
8.9.2Adjusting the track marker length ........................................................................................152
8.9.3Moving the track marker to transport position......................................................................153
8.10One-sided switching.............................................................................................................154
8.10.1Mechanically adjustable one-sided switching ......................................................................154
8.10.2Electrically adjustable one-sided switching..........................................................................155
8.11Moving the tramline marker into working/transport position ................................................155
8.11.1Moving the tramline marking device into working position ..................................................155
8.11.2Moving the tramline marker into transport position..............................................................158
8.12Moving the transport safety bar into road transport/parking position ..................................159
8.12.1Moving the transport safety bar to transport position ..........................................................159
8 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
8.12.2Moving the transport safety bar into parking position ......................................................... 159
8.13Moving the pulse wheel into the working/transport position ............................................... 160
8.13.1Moving the pulse wheel to working position........................................................................ 160
8.13.2Moving the pulse wheel to transport position...................................................................... 160
9Transportation......................................................................................... 161
9.1Moving the seeding combination into transport position..................................................... 161
9.2Legal regulations and safety ............................................................................................... 162
10Use of the implement.............................................................................. 166
10.1Moving the implement from transport into working position................................................ 167
10.2Work commencement ......................................................................................................... 167
10.3During operation.................................................................................................................. 168
10.3.1Overview of the inspections ................................................................................................ 168
10.3.2Turning at end of the field ................................................................................................... 169
10.3.3Track marker ....................................................................................................................... 170
10.3.4End of work in the field........................................................................................................ 170
10.4Emptying the hopper and/or metering unit and replacing the metering roller ..................... 171
10.4.1Quick emptying of the hopper ............................................................................................. 171
10.4.2Emptying the hopper and/or the metering unit and replacing the metering roller.............. 172
11Faults........................................................................................................ 176
11.1Residual seed quantity indicator ......................................................................................... 177
11.2Deviations between the set and actual seed rate ............................................................... 177
12Cleaning, maintenance and repair......................................................... 178
12.1Safety first ........................................................................................................................... 178
12.2Cleaning the implement ...................................................................................................... 179
12.2.1Clean the distributor head ................................................................................................... 181
12.3Shutdown of the implement over a long period of time....................................................... 181
12.4Installation, setting and repair work (specialist workshop).................................................. 182
12.4.1Initial fitting of coupling parts (specialist workshop) ............................................................ 182
12.4.1.1Soil tillage implements type 00: Overview of the coupling parts......................................... 186
12.4.1.2Soil tillage implements type 00: coupling part installation................................................... 186
12.4.1.3Soil tillage implements type 01: overview of the coupling parts.......................................... 191
12.4.1.4Soil tillage implements type 01: coupling part installation................................................... 191
12.4.2Initial installation of the transport safety bar bracket........................................................... 194
12.4.3Working on the distributor head .......................................................................................... 195
12.4.4Exchanging the exact following harrow and the roller harrow with each other
(specialised workshop)........................................................................................................ 196
12.4.5Adjusting the tramlines on the segment distributor head .................................................... 197
12.4.5.1Adjusting the tramline track width on the segment distributor head ................................... 198
12.4.5.2Adjusting the tramline wheelmark width on the segment distributor head.......................... 198
12.4.5.3Replacing the segment in the segment distributor head..................................................... 199
12.4.5.4Connecting the tramline segments...................................................................................... 200
12.4.5.5Deactivating the active tramline flaps.................................................................................. 201
12.4.6Installing the plugs in the segment distributor head for spreading seed with wide
row spacing ......................................................................................................................... 202
12.5Lubrication........................................................................................................................... 203
12.5.1Greasing points – overview................................................................................................. 203
12.6Maintenance schedule – overview ...................................................................................... 204
12.6.1Inspection criteria for hydraulic hose lines before every start-up........................................ 205
12.6.2Inspection criteria for hydraulic hose lines using the maintenance schedule .................... 205
12.6.2.1Identification of hydraulic hose lines ................................................................................... 207
12.6.2.2Installing and removing hydraulic hose lines ...................................................................... 207
12.6.3Visual inspection of the upper and lower link pins .............................................................. 208
12.7Bolt tightening torques ........................................................................................................ 208
13Hydraulic diagram................................................................................... 210
13.1AD-P Special hydraulic diagram ......................................................................................... 210
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 9
User information
10 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
1 User information
The User Information section provides information on use of the operating manual.
This operating manual is valid for all versions of the implement.
Figures serve as a reference and are to be understood as representations of the principle.
All of the equipment is described without indicating it as special optional equipment. A description may
be provided for equipment that is not fitted on the implement or is only available in certain markets.
The sales documents provide information on the equipment of your implement or consult your dealer
for more detailed information.
All information in this operating manual corresponds to the state of knowledge at the time of publica-
tion. Due to ongoing development of the implement, deviations are possible between the implement
and the information in this operating manual. No claims can be made based on differences in the
specifications, figures or descriptions.
If you want to sell the implement, ensure that the operating manual is supplied with the implement.
1.1 Purpose of the document
This operating manual
describes the operation and maintenance of the implement.
provides important information on safe and efficient handling of
the implement.
is a component part of the implement and should always be kept
with the implement or the towing vehicle.
must be kept in a safe place for future use.
1.2 Locations in the operating manual
A
ll the directions specified in the operating manual are always seen in
the direction of travel.
1.3 Diagrams
Instructions and responses
Activities to be carried out by the user are given as numbered instruc-
tions. Always keep to the order of the instructions. The reaction to the
handling instructions is given by an arrow. Example:
1. Instruction 1
Reaction of the implement to handling instruction 1
2. Instruction 2
User information
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 11
Lists
Lists without an essential order are shown as a list with bullets. Ex-
ample:
Point 1
Point 2
Item numbers in diagrams
Numbers in round brackets refer to the item numbers in the diagrams.
The first number refers to the diagram and the second number to the
item.
Example (Fig. 3/6):
Figure 3
Item 6
General safety instructions
12 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2 General safety instructions
This section contains important information on safe operation of the
implement.
2.1 Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a
basic requirement for safe handling and fault-free implement opera-
tion.
Obligations of the operator
The operator is obliged only to let those people work with/on the im-
plement who
are aware of the basic workplace safety information and accident
prevention regulations.
have been trained in working with/on the implement.
have read and understood this operating manual.
The operator is obliged
to keep all the warning symbols on the implement in a legible
state
to replace damaged warning symbols.
Obligations of the user
Before starting work, anyone charged with working with/on the imple-
ment is obliged
to comply with the basic workplace safety instructions and acci-
dent prevention regulations.
to read and understand the "General safety information" section
of this operating manual.
to read the section "Warning symbols and other labels on the
implement" in this operating manual and to follow the safety in-
structions represented by the warning symbols when operating
the implement
to get to know the implement.
to read the sections of this operating manual, important for carry-
ing out your work.
If the user discovers that a function is not working properly, then they
must eliminate this fault immediately. If this is not the task of the user
or if the user does not have the appropriate technical knowledge, then
they should report this fault to their superior (operator).
General safety instructions
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 13
Risks in handling the implement
The implement has been constructed to the state-of-the art and the
recognised rules of safety. However, operating the implement may
cause risks and restrictions
the health and safety of the user or third persons.
the implement itself.
other property.
Only use the implement
for the purpose for which it was intended.
in a perfect state of repair.
Eliminate any faults immediately which could impair safety.
Guarantee and liability
Our "General conditions of sales and delivery" are always applicable.
These shall be available to the operator, at the latest on conclusion of
the contract. Guarantee and liability claims for damage to people or
property will be excluded if they can be traced back to one or more of
the following causes:
Improper use of the implement
Improper installation, commissioning, operation and mainte-
nance of the implement
Operation of the implement with defective safety equipment or
improperly attached or non-functioning safety and protective
equipment
Non-compliance with the instructions in the operating manual
regarding commissioning, operation and maintenance
Unauthorised design changes to the implement
Insufficient monitoring of implement parts which are subject to
wear
Improperly executed repairs
Disasters due to the effects of foreign objects and force majeure.
General safety instructions
14 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2.2 Representation of safety symbols
Safety instructions are indicated by the triangular safety symbol and
the highlighted signal word. The signal word (DANGER, WARNING,
CAUTION) describes the severity of the risk, and carries the following
meaning:
DANGER
Indicates a direct threat at high risk which will result in death or
most serious bodily harm (loss of limbs or long-term harm),
should it not be prevented.
If the instructions are not followed, then this will result in im-
mediate death or serious physical injury.
WARNING
Indicates a medium risk, which could result in death or (serious)
physical injury if not avoided.
If the instructions are not followed, then this may result in death
or serious physical injury.
CAUTION
Indicates a low risk which could cause minor or medium level
physical injury or damage to property if not avoided.
IMPORTANT
Indicates an obligation to special behaviour or an activity required for
proper implement handling.
Non-compliance with these instructions can cause faults on the im-
plement or disturbance to the environment.
NOTE
Indicates handling tips and particularly useful information.
These instructions will help you to use all the functions of your imple-
ment in the best way possible.
General safety instructions
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 15
2.3 Organisational measures
The operator must provide the necessary personal protective equip-
ment as per the information provided by the manufacturer of the crop
protection agent to be used, such as:
Safety glasses
Protective shoes
Chemical-resistant overalls
Skin protection agents, etc.
The operation manual
must always be kept at the place at which the implement is op-
erated.
must always be easily accessible for the user and maintenance
personnel.
Check all the available safety equipment regularly.
2.4 Safety and protective equipment
Before starting up the implement each time, all the safety and protec-
tion equipment must be properly attached and fully functional. Check
all safety and protection equipment regularly.
Faulty safety equipment
Faulty or disassembled safety and protection equipment can lead to
dangerous situations.
2.5 Informal safety measures
As well as all the safety information in this operating manual, comply
with the general, national regulations pertaining to accident prevention
and environmental protection.
When driving on public roads and routes you should comply with the
statutory road traffic regulations.
General safety instructions
16 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2.6 User training
Only those people who have been trained and instructed may work with/on the implement. The opera-
tor must clearly specify the responsibilities of the people charged with operation and maintenance
work.
People being trained may only work with/on the implement under the supervision of an experienced
person.
Person
Job
Person special-
ly trained for the
activity 1)
Trained per-
son 2)
Person with specialist
training (specialist work-
shop) 3)
Loading/Transport X X X
Start-up X
Set-up, tool installation X
Operation X
Maintenance X
Troubleshooting and fault elimina-
tion
X X
Disposal X
Legend: X..permitted ..not permitted
1) A person who can assume a specific task and who can carry out this task for an appropriately
qualified company.
2) Instructed persons are those who have been instructed in their assigned tasks and in the possi-
ble risks in the case of improper behaviour, have been trained if necessary, and have been in-
formed about the necessary protective equipment and measures.
3) Persons with specialised technical training shall be considered as a specialist. Due to their spe-
cialist training and their knowledge of the appropriate regulations, they can evaluate the work with
which they have been charged and detect possible dangers.
Comment:
A qualification equivalent to specialist training can be obtained from several years' experience in
the relevant field.
Only a specialist workshop may carry out maintenance and repair
work on the implement, if such work is additionally marked "Work-
shop". The personnel of a specialist workshop shall possess the
appropriate knowledge and suitable aids (tools, lifting and support
equipment) for carrying out the maintenance and repair work on the
implement in a way which is both appropriate and safe.
General safety instructions
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 17
2.7 Safety measures in normal operation
Only operate the implement if all the safety and protection equipment
is fully functional.
Check the implement at least once a day for visible damage and
check the function of the safety and protection equipment.
2.8 Danger from residual energy
Note that there may be residual mechanical, hydraulic, pneumatic and
electrical/electronic energy on the implement.
Use appropriate measures to inform the operator. You can find de-
tailed information in the relevant sections of this operating manual.
2.9 Maintenance and repair work, fault elimination
Carry out prescribed setting, maintenance and inspection work in
good time.
Secure all media such as compressed air and the hydraulic system
against unintentional start-up.
Carefully fix and secure larger assembly groups to lifting gear when
carrying out replacement work.
Check all the bolted connections for tightness. On completion of the
maintenance work, check the function of the safety and protective
devices.
General safety instructions
18 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2.10 Design changes
You may make no changes, expansions or modifications to the im-
plement without the authorisation of AMAZONEN-WERKE. This also
applies when welding support parts.
A
ny extension or conversion work shall require the written approval of
AMAZONEN-WERKE. Only use conversion and special equipment
parts approved by AMAZONEN-WERKE so that the operating permit,
for example, remains valid in accordance with national and interna-
tional regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport
according to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through the failure of support parts.
It is strictly forbidden to
drill holes in the frame or on the running gear,
increase the size of existing holes on the frame or the running gear
weld on load-bearing parts.
General safety instructions
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17 19
2.10.1 Spare and wear parts and aids
Immediately replace any implement parts which are not in a perfect
state.
Use only genuine AMAZONE spare and wear parts or the parts
cleared by AMAZONEN-WERKE so that the operating permit retains
its validity in accordance with national and international regulations. If
you use wear and spare parts from third parties, there is no guarantee
that they have been designed and manufactured in such a way as to
meet the requirements placed on them.
AMAZONEN-WERKE shall accept no liability for damage caused by
the use of non-approved spare and wear parts or aids.
2.11 Cleaning and disposal
Handle and dispose of any materials used carefully, in particular
when carrying out work on lubrication systems and equipment
and
when cleaning using solvents.
2.12 User workstation
The implement may be operated by only one person sitting in the
driver's seat of the tractor.
General safety instructions
20 AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2.13 Warning symbols and other labels on the implement
Always keep all the warning symbols of the implement clean and in a
legible state! Replace illegible warning symbols. You can obtain the
warning symbols from your dealer using the order number (e.g.
MD075).
Warning symbols - Layout
Warning symbols indicate danger areas on the implement and warn
against residual dangers. At these points, there are permanent or
unexpected dangers.
A warning symbol consists of two fields:
Field 1
is a symbol describing the danger, surrounded by triangular safety
symbol.
Field 2
is a symbol showing how to avoid the danger.
Warning symbol - Explanation
The Order number and explanation column provides an explanation
of the adjacent warning symbol. The description of the warning sym-
bols is always the same and specifies, in the following order:
A description of the risk.
For example: risk of cutting
The consequence of non-compliance with the risk prevention
instructions.
For example: causes serious injuries to fingers or hands.
The risk prevention instructions.
For example: only touch implement parts when they have come
to a complete standstill.
Other manuals for AD-P 3001 Special 850
1
This manual suits for next models
5
Table of contents
Other Amazone Farm Equipment manuals
Amazone
Amazone TSE 3000 User manual
Amazone
Amazone CatrosXL 3003 Installation instructions
Amazone
Amazone FTender 1600 Installation instructions
Amazone
Amazone Cirrus 03 User manual
Amazone
Amazone UX 6201 Super User manual
Amazone
Amazone ZA-M 1800 Ultra Service manual
Amazone
Amazone ZA-M Profis Hydro User manual
Amazone
Amazone Cirrus 03 User manual
Amazone
Amazone Precea 3000 Installation instructions
Amazone
Amazone Cirrus Series User manual
Amazone
Amazone Precea 3000-A Installation instructions
Amazone
Amazone EasyCheck Installation instructions
Amazone
Amazone Citan 12001-C User manual
Amazone
Amazone Groundkeeper SmartCut GH 1350 User manual
Amazone
Amazone CatrosXL 4003-2TS Installation instructions
Amazone
Amazone Ceus 3000-TX Installation instructions
Amazone
Amazone GHD 1500 User manual
Amazone
Amazone VK70181000 User manual
Amazone
Amazone CatrosXL 4003-2 Installation instructions
Amazone
Amazone Catros 4003-2 Installation instructions
Popular Farm Equipment manuals by other brands
Tufline
Tufline PRC Series Operator's manual
IBEX
IBEX TS100 quick start guide
Sioux Tools
Sioux Tools DAAY POWER SWEEP owner's manual
Exapta
Exapta UniForce Installation & adjustment instructions
Yetter
Yetter 2967-180B OPERATOR'S / INSTRUCTION MANUAL W/ PARTS IDENTIFICATION
SIP
SIP SILVERCUT DISC 800 C RC Instruction for work
