Voice Mail
Dial 999, enter password: extension plus your password
Greetings:
Record Greeting Press 8
Messages:
Retrieve Message Press 1
Delete Message Press 3# or Delete Soft Key
Save/Skip Message Press 2
Replay Message Press 1
Retrieving Voice Mail Messages Externally (DDI’s)
● Dial DDI Number
● During Message press # key
● Enter Authorisation Code (2 to 5 digits) followed by #
● Follow prompts
LIP-8002E User Guide
Extensions
Call Park
Group Call Pickup
Speed Dial
Call Log
Background Music
Call Back
Redial
Conference
Flash
Speed
700-899
601-609
*1
Speed 01-19
Speed 200-999
TRANS/PGM + 57
TRANS/PGM + 73
TRANS/PGM + 92
TRANS/PGM + 97
TRANS/PGM + 91
TRANS/PGM + 94
TRANS/PGM + 90
Flexible Keys
Program Flexible Buttons
● Press the TRANS/PGM button
● Press a flexible button you wish to program
● Enter the desired code (refer to the table below)
● Press the HOLD/SAVE button
Dial by name Keys Chart
Placing a Call
● Dial an extension number
● Or: Dial the external number required
Call Transfer
● While connected to an outside line, press the TRANS/PGM
● Dial the desired extension number, (700-899)
● Hang up to complete call transfer
● Or: Announce the call, then hang up to complete call transfer
Call Pickup
● Dial *1 to answer an unattended phone ringing in your area
Using Speed Dial Numbers
● Press the Speed Button
● Dial the speed bin number you wish to call (01-19 or 200-999)
Do not Disturb (DND)
● Press Dnd (Toggle On/Off)
● Dial *53 (Toggle On/Off) - 8 button
Redial
● Dial 52 - automatically starts last number redial
Paging
● Dial #00 For “All Call” Paging
● Dial #7 For “Internal” Paging
● Dial #5 For External Paging
Voice Mail
● Dial 49
● Dial the desired call forward type
1- Immediate
2- Busy
3- No Answer
4- Busy/no answer
5- Immediate to an External Number
6- No Answer to an External Number
● Dial the destination you wish to forward your calls to (700-899 or dial 999 to
send to Voice Mail)
To cancel a Call Forward
● Dial 59
Call Forward
Holding Calls
To place call on hold
● Press the HOLD/SAVE button
To retrieve
● Press flashing line /loop flex button
Call Park
To Put a Call on Park
● While connected to an outside call
● Press the TRANS/PGM
● Dial the Call Park Location (601-609)
● Hang up
Retrieve a Parked Call
● Dial the Call Park Location (601-609)
Flexible (Flex) Buttons