
Installation Instructions
Page 2 of 2Bourne
Wood Table Assembly
(continued)
Step 5
Fasten Apron to Top
• Attach Apron to Top using #8 x 1 3/4”pan
head screws.
• Use a #10 x 3”truss head screw thru each
corner block as shown.
Step 6
Level Table
• Carefully flip table upright.
• Level table front-to-back and side-to-side
by rotating adjustable glides.
Step 4
Fasten Legs to Top
• Align holes in leg plates to pre-bored
holes in Top.
• Fasten all four Legs to Top using
#10 x 1”flat head screws.
Step 3
Fasten Legs to Apron
• Fasten Legs to Apron using #5/16-18 x 2 1/2”
Bolts. Each bolt gets (1) washer and
(1) lock washer as shown below.
#8 x 1 3/4”pan head
Wood Rail
5/16-18 x 2 1/2”Bolt
Washer
Lock Washer
#10 x 1 ”flat head
#10 x 3”truss head
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546
Form No. INST-BU001
5/1/16