JSI Lok ZLKT2430-29TTT User manual

INSTALLATION INSTRUCTIONS
NOTE: all screws provided must be
installed for proper installation and
compliance wit product warranty.
Recommended tools
Hardware enclosed
LOK
ZLKT2430-29TTT- CASTER
Assembly Instruction for special
24x30 Lok Table wit Fixed T-
base wit casters
(16) #12 x 1” Phillips
Panhead Wood Screws
ZL T2430-29TTT-CASTER
Table Components
Qty (1)
1-1/8 T x 24 W x 30”L table top
Qty (1)
Set of two metal table legs
1/8” Drill Bit
#3 Phillips Head
INST-L 0910

INSTALLATION INSTRUCTIONS
NOTE: all screws provided must be
installed for proper installation and
compliance wit product warranty.
Recommended tools
LOK
ZLKT2430-29TTT- CASTER
(Cont.) Assembly Instruction for
special 24x30 Lok Table wit
Fixed T-base wit casters
Leg Placement:
•Lay the table top face down on
soft, flat surface. It is important
to avoid scratching surface.
•Align the leg mounting plate as
shown in the diagram
•Mark the (8) hole locations and
drill screw pilot holes 1/8”dia x
3/4” Deep
•Use (8) #12 x 1” Phillips panhead
screws to attach leg
•Repeat process for the leg on
opposite end of table
Front Edge of Table Top
1/8” Drill Bit
INST-L 0910