2 / 12 – K410057700003-00 / 09.2018 – ©www.kemper-olpe.de
EN
Precautions
for installation, maintenance and operation
Use
The KEMPER FROSTI®is used as a
frost-proof outdoor tap.
Do not use the product for other
purposes than described above.
Any other uses constitute misuse.
Warnings
Be sure to read and follow the warn-
ings in the manual. Failing to do so
can lead to personal injury or material
damage!
Important warnings:
Warning! Highlights risks
that may result in injury, ma-
terial damage or contamination
of drinking water.
Note! Highlights risks that
may result in damage to the
plant or dysfunction.
Important advice to the operator
Medium: water
maximum operating temperature 90 °C,
pressure rating PN 16
1. The valve should only be used
- in good order and condition
- as intended
2. During periods prone to frost,
always separate the hose and
all screw connections from
the tap.
Maintenance
In accordance with BS EN 806-5, main-
tenance is to be carried out on the tap
annually.
Be sure to comply with the local
regulations on waste recycling
and disposal.
Installation and operation
Read the manual and follow the
instructions before installation.
Installation and maintenance must be
carried out by qualified plumbers.
Provide manual to the plant operator
and keep on hand for further reference!
The place of installation may not be at
risk of flooding.
Perform a leak test after installation
and before commissioning!
Priority must be given to the national
standards and provisions on sanitary
installations and accident prevention.
All dimension specifications are given
in mm.
Warranty
No warranty in case of:
- Non-compliance with the manual.
- Damage due to incorrect installation.
- Unauthorised modification of the product.
