Ofs Riff Series User manual

RIFF-NIC, BAR HEIGHT AND TENNIS TABLE
ASSEMBLY INSTRUCTIONS
Riff Tables

Riff Tables by OFS | Assembly Instructions Page 2 of 7
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
84" & 72" LONG
RIFF TABLE COMPONENTS
1 Top
QTY
1
2 Leg Assembly 2
3 Support Assembly 1
4 Cross Rail 1
5 Brace 2
6 1000599/Leveler 4
7#8 x 2 ½" Pan Head Screws (HK-101) 10
8#8 x 2" Pan Head Screws (HK-102) 4
9#8 x 1 ½" Pan Head Screws (HK-103) 4
10 #8 x 1 ¼" Pan Head Screws (HK-104) 8
11 #8 x /" Pan Head Screws (HK-105) 20
1
2
3
4
5
6
10
7
97
11
8
ITEM NO. PART # DESCRIPTION QTY.
1 TOP TOP 1
2
LEG ASSY LEG ASSY 2
3 SUPPORT ASSY SUPPORT ASSY 1
4 CROSS RAIL CROSS RAIL 1
5
BRACE BRACE 2
61000599
LEVELER 4
7
8 X 2.5 PAN HEAD
(HK-101)
SCREW 10
8
8 X 2 PAN HEAD
(HK-102)
SCREW 4
9
8 X 1.5 PAN HEAD
(HK-103)
SCREW 4
10
8 X 1.25 PAN
HEAD (HK-104)
SCREW 8
11
8 X .625 PAN
HEAD (HK-105)
SCREW 20
0
2543INS Rev: Dwg:
Part #: 1571955
RIFF TABLE ASSEMBLY
1
2
3
8
5
7
10
6
11
4
7
9

Page 3 of 7 Riff Tables by OFS | Assembly Instructions
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
1
2
3
4
5
6
7
8
9
12
9
13
10
11
10
ITEM NO. PART # DESCRIPTION QTY.
1 TOP TOP 1
2 LEG ASSY LEG ASSY 2
3 CTR LEG ASSY CTR LEG ASSY 1
4 SUPPORT ASSY SUPPORT ASSY
1
5
CROSS RAIL-
UNDER
CROSS RAIL-
UNDER
1
6
CROSS RAIL-
OVER
CROSS RAIL-
OVER
1
7 BRACE BRACE
2
8 1000599 LEVELER
6
9
8 X 2.5 PAN
HEAD (HK-101)
SCREW
13
10
8 X 2 PAN
HEAD (HK-102)
SCREW
6
11
8 X 1.5 PAN
HEAD (HK-103)
SCREW
4
12
8 X 1.25 PAN
HEAD (HK-104)
SCREW
16
13
8 X .625 PAN
HEAD (HK-105)
SCREW
28
0
2544INS Rev: Dwg:
Part # 1571994
RIFF TABLE ASSEMBLY
1
2
3
8
5
7
10 6
11
4
9
12
13
96" & 108" LONG
RIFF TABLE COMPONENTS
1 Top
QTY
1
2 Leg Assembly 2
3 Center Leg Assembly 1
4 Support Assembly 1
5 Cross Rail-Under 1
6 Cross Rail-Over 1
7Brace 2
81000599/Leveler 6
9#8 x 2 ½" Pan Head Screws (HK-101) 13
10 #8 x 2" Pan Head Screws (HK-102) 6
11 #8 x 1 ½" Pan Head Screws (HK-103) 4
12 #8 x  ¼” Pan Head Screws (HK-104) 16
13 #8 x /” Pan Head Screws (HK-105) 28

Riff Tables by OFS | Assembly Instructions Page 4 of 7
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
STEP 1
1. Place Worksurface, bottom side up, on a non-marring surface.
2. Align Notches and slide Under Top Assembly onto Center Base
(96" and 108" long tops only).
3. Connect End Bases to Under Top Assembly by inserting Tennons
into mortises.
4. Secure Bases to Under Top Assembly with #8 x 5/8" Pan Head
Screws (HK-105).
Center base (96" & 108" tops)
End base
Under top
assembly
Mortise
Tennon
Notches
Place work surface, bottom side up, on a non-marring surface. •
Align notches and slide Under top assembly onto Center base (96" & 108" long tops only). •
Connect End bases to Under top assembly by inserting tennons into mortises. •
96" & 108" long tops only
Secure bases to Under top assembly with #8 x 5/8" pan head screws (HK-105). •
Riff Table
Assembly Instructions
Page 1
Series: Part #: Verve X1
Center Base (96" and 108" tops)
96" and 108" long tops only
Under Top
Assembly
End Base
Mortise
Tennon
Notches

Page 5 of 7 Riff Tables by OFS | Assembly Instructions
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
STEP 2
1. Fit Cross Rail Angled Tennons into Mortise on bottom of Base Rail.
2. Straight Tennons fit on top and bottom of Center Base Rail
(96" and 108" long tops only).
3. Secure Angled Tennons with #8 x 1 ½" Pan Head Screws (HK-103).
4. Secure Straight Tennons with (2) #8 x 2" Pan Head Screws (HK-102).
Align holes with
holes in base rail
Angled tennon
Mortise
Straight
tennon
96" & 108" long tops only
Fit Cross rail angled tennons into motise on bottom of base rail. •
Straight tennons fit on top and bottom of center base rail (96" &108" long tops only). •
Secure angled tennons with # 8 x 1 1/2" pan head screws (HK-103). •
Secure straight tennons with (2) #8 x 2" pan head screws (HK-102). •
Riff Table
Assembly Instructions
Page 2
Series: Part #: Verve X1
Align holes with
holes in Base Rail
96" and 108" long tops only
Angled Tennon
Mortise
Straight
Tennon

Riff Tables by OFS | Assembly Instructions Page 6 of 7
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
STEP 3
1. Install Braces by inserting Tennon into Mortise.
2. Bottom edge of Brace should rest flush on Cross Rail.
Brace
Cross rail
Mortise
Tennon
Insall Braces by inserting tennon into mortise •
Bottom edge of Brace should rest flush on Cross rail. •
Secure Brace to Mount plate with
#8 x 2" pan head screws (HK-102).
Secure Brace to Cross rail with
#8 x 2 1/2" pan head screws (HK-101)
Riff Table
Assembly Instructions
Page 3
Series: Part #: Verve X1
Cross Rail
Secure Brace to Cross Rail with
#8 x 2 ½" Pan Head Screws (HK-101).
Secure Brace to Mount Plate with
#8 x 2" Pan Head Screws (HK-102).
Brace
Mortise
Tennon

Page 7 of 7 Riff Tables by OFS | Assembly Instructions
Riff-Nic, Bar Height and Tennis Table Assembly Instructions
STEP 4
1. Turn Base over and place in desired location.
2. Make Base level by adjusting Levelers.
3. Place Worksurface on Base and position so it is centered
both directions.
Center
on
base
Center
on
base
Secure Work surface to base by •
screwing #8 x 5/8" pan head screws
(HK-105) through the L-Brackets.
Use #8 x 1 1/4" pan head screws •
(HK-104) to secure cleats to work surface.
Use #8 x 2 1/2" pan head screws (HK-101) •
to secure bases to work surface.
Cleat
L-Bracket
#8 x 5/8"
#8 x 2 1/2"
#8 x 1 1/4"
Turn base over and place in desired location. •
Make base level by adjusting levelers. •
Place work surface on base and position so it is centered both directions. •
Riff Table
Assembly Instructions
Page 4
Series: Part #: Verve X1
Center
on base
Center
on base
L-Bracket
Cleat
4. Secure Worksurface to Base by screwing
#8 x 5/8” Pan Head Screws (HK-105) through
the L-Brackets.
5. Use #8 x1 ¼” Pan Head Screws (HK-104)
to secure Cleats to Worksurface.
6. Use #8 x 2 ½” Pan Head Screws (HK-101)
to secure Bases to Worksurface.
#8 x 1 ¼"
#8 x 2 ½" #8 x 5/8"

10.15
an OFS Brands™company | 1204 East Sixth Street | Huntingburg, IN 47542 | 800-521-5381 | ofs.com
PART # 1572150
INSTRUCTION SHEET # 2545INS
RIFF-NIC, BAR HEIGHT AND TENNIS TABLE
ASSEMBLY INSTRUCTIONS
Riff Tables