Teknik Boulevard Cafe 5421950 User manual

www.teknikoffice.co.uk
Rectangular Bookcase/DisplayUnit
Boulevard Cafe Collection | Model 5421950
For things 'n such.
Teknik

Table of Contents Assembly Tools Required
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
åScrews are shown actual size. You may receive extra hardware with your unit.
Hardware Identification
Pae 2
3
2
4-8
13-14
Part Identification
Hardware Identification
Assembly Steps
Safety
FURNITURE TIPPING RESTRAINT KIT - 1
99
ALLEN WRENCH - 1
2
4BLACK 38" MACHINE SCREW  16 3BLACK 138" ALLEN HEAD SCREW  4
BUMPER - 24
1

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C BACK (1)
D TOP FRAME (1)
E SHELF FRAME (3)
F TOP GLASS SHELF (1)
G GLASS SHELF (3)
Pae 3
B
C
EA
D
E
E
F
G
G
G

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Fasten the ENDS (A and B) to the BACK (C). Use four
BLACK 1-3/8" ALLEN HEAD SCREWS (3) with the ALLEN
WRENCH (2).
Pae 4
B
C
A
The hole
must be here.
BLACK 1-3/8" ALLEN HEAD SCREW
(4 used in this step)
3
Some assembly
(and snacks) required.
2

å Carefully lay your unit on its back.
å Fasten the FRAMES (D and E) to the ENDS (A and B) and
BACK (C). Use sixteen BLACK 3/8" MACHINE SCREWS (4)
throuh the tabs on the ENDS and BACK and into the holes
in the FRAMES.
å NOTE: You may want to start each SCREW a few turns
before completely tihtenin any of them.
Step 2
Pae 5
BLACK 3/8" MACHINE SCREW
(16 used in this step)
4
Surface
with holes.
B
C
A
E
E
E
Tab
D

å Carefully stand your unit upriht.
å Stick a BUMPER (1) onto each tab on the FRAMES (D and E).
Step 3
Pae 6
Pro Tip: Lift with your
les. And, you know,
your arms.
1
(24 used)
E
E
E
D

Step 4
Pae 7
Tempered safety lass is used. It is stroner than normal lass, and it will not break into lon, sharp, knife-like
shards. However, safety lass can break. When safety lass breaks, it instantly fractures into small, bead-like
pieces. These small pieces may have sharp edes.
For your safety, follow these precautions when you assemble your product:
• Wear safety lasses or other eye protection.
• Do not try to drill into or cut safety lass. It will instantly break into small pieces.
• Do not force the lass into position.
• If the lass breaks, be careful when you pick up the pieces. They may have sharp edes.
Caution
å Carefully place the GLASS SHELVES (F and G) onto the
tabs on the FRAMES (D and E).
E
E
E
D
F
G
G
G

Step 5
Pae 8
å We recommend usin the FURNITURE TIPPING RESTRAINT KIT (99) for added stability. Fasten a bracket to the back
ede of the BACK (C) usin the 5/8" screw as shown.
å Place your unit in its final location aainst a wall.
å Follow the instructions included in the KIT to fasten your unit to the wall.
å NOTE: Please read the back paes of the instruction booklet for important safety information.
å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
99
Use the 5/8" screw throuh the
small hole in a bracket and into the
back ede of the TOP FRAME (B). Small hole
30 lbs.
30 lbs.
40 lbs.
20 lbs.
C

WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards,
or damage to your furniture or household items. Carefully read the following chart.
Look out for: What can happen: How to avoid the problem:
• Overloaded shelves.
• Improper loading can cause the
product to be top-heavy.
• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.
• Never exceed the weight limits shown in
the instructions.
• Work from bottom to top when loading
shelves. Place the heavier items on the
lower shelves.
• Improperly moving furniture that is not
designed and equipped with casters. • Furniture can tip over or break if improperly moved.
• Physical injury. Furniture can be very
heavy.
• Unload shelves from top to bottom before
moving the furniture.
• Do not push furniture, especially on a
carpeted floor. Have a friend help you lift
the item and set it in place.
• This unit must be positioned against a
wall.
• Children climbing on the shelves can
cause the product to tip. • Risk of injury or death. • Do not allow children to climb on the shelves. Avoid placing items like toys or
candy on upper shelves.
• Use the supplied tipping restraint kit for
added stability.
• Placing TVs on furniture items that are
not designed to support a television is
hazardous.
• Risk of injury or death. TVs can be very
heavy. Plus the weight and location of the
picture tube tends to make TVs unbalanced
and prone to tipping forward.
• This product is not designed to support a
television.
Page 13