Teknik Canal Heights Coffee Table 5419233 User manual

www.teknikoffice.co.uk
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Wake up and smell it.
Canal HeightsCoffee Table
5419233
Teknik

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
3
4-8
9-10
11-12
13-14
15
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Page 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A END (1)
B TOP (1)
C TOP SUPPORT (2)
D END SUPPORT (2)
Hardware Identification
1/2" MACHINE SCREW - 16
11-3/8" LARGE HEAD SCREW - 10 2
A
A
B
C
C
D
D
Page 3

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Fasten the ENDS (A) to the TOP SUPPORTS (C). Use
eight 1/2" MACHINE SCREWS (1).
A
A
Page 4
C
C
1/2" MACHINE SCREW
(8 used in this step)
1

å Fasten the ENDS (A) and TOP SUPPORTS (C) to the TOP (B).
Use ten 1-3/8" LARGE HEAD SCREWS (2).
Step 2
A
A
Page 5
C
C
B
1-3/8" LARGE HEAD SCREW
(10 used in this step)
2
Surface
with holes

å Fasten an END SUPPORT (D) to the ENDS (A). Use four
1/2" MACHINE SCREWS (1).
Step 3
Page 6
A
A
D
1/2" MACHINE SCREW
(4 used in this step)
1

å Fasten the remaining END SUPPORT (D) to the ENDS (A).
Use four 1/2" MACHINE SCREWS (1).
Step 4
Page 7
A
A
D
1/2" MACHINE SCREW
(4 used in this step)
1

Step 5
Page 8
å Carefully stand your unit upright.
å NOTE: Please read the back pages of the instruction
booklet for important safety information.
å This completes assembly. Clean with your favorite furniture
polish or a damp cloth. Wipe dry.
50 lbs.

WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards,
or damage to your furniture or household items. Carefully read the following chart.
Look out for: What can happen: How to avoid the problem:
• Overloaded drawers and shelves. • Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded drawers or shelves can break.
• Never exceed the weight limits shown in
the instructions.
• Work from bottom to top when loading
shelves and drawers. Place the heavier
items on the lower shelves or in lower
drawers.
• Placing TVs on furniture items that are not
designed to support a television is
hazardous.
• Risk of injury or death. TVs can be very
heavy. Plus the weight and location of the
picture tube tends to make TVs unbalanced
and prone to tipping forward.
• This product is not designed to support a
television.