Teknik Denver Swivel Recliner User manual

Denver Swivel Recliner
DESCRIPTION
Recliner with Footstool
01234 328804
01234 342446
[email protected]
www.teknikoffice.co.uk

This product is designed to seat people up to a maximum of 115kgs (18 stone)
Check and re-tighten parts/nuts & bolts every three months
For any assistance with assembly, please contact customer service on 01234 328804 or
email [email protected]

IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Identify all the parts and hardware.
Do not discard of the packaging until you have checked that you have all of the parts and hardware
required. Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children and pets. Keep
children and pets away during assembly. To avoid danger of suffocation, always keep plastic bags
away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid scratches. We do not
recommend the use of power tools for assembly as this could damage the unit. Only use manual
tools.
Requires 2 people for ease of assembly.
SAFETY INFORMATION
CARE and MAINTENANCE
Wipe regularly with clean water and a damp, clean, soft white cloth
General cleaning can be done as needed with a mild detergent and water solution. Always rinse
with clean water and dry.
For heavy soiling, dampen a soft white cloth or soft bristle brush. Use care as scrubbing can damage
the surface.
More difficult stains can be treated, but this should be occasional, not daily, cleaning.
ANY cleaning solution used must be removed with clean water and a clean white cloth. Cleaning
residue left on the material can cause it to dry out and crack, or affect the color.
DO NOT use any cleaners with corrosive ingredients (lye, acids or ammonia).

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
BA C
ED
Seat Back
Qty 1
Chair Leg
Qty 5
LHF & RHF Arm
Qty 1 set
Footstool Pad
Qty 1
F
Seat pad
Qty 1
U-frame
Qty 1
X5

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
HG
Footstool Leg
Qty 4
Chair Spindle
Qty 1
Footstool Spindle
Qty 1
Footstool Plate
Qty 4
Screws
Qty 18
I
JKL
Washers
Qty 18
X4

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
M
P
O
Q
N
R
Nuts
Qty 1
Bolt & Clip
Qty 2
Screw
Qty 6
Screw
Qty 4
Screw
Qty 2
Spanner
Qty 1

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
SU
Allen Key
Qty 1
Recliner Handle
Qty 1
V
Spanner
Qty 1
W
Spanner
Qty 8

ASSEMBLY
STEP 1
STEP 2
N
W
Q
STEP 3
S
N
S
W
Place arm at an angle as displayed and
partially fasten bolt.
Q

ASSEMBLY
STEP 4
STEP 6
O
W
R
M
S
V
STE
P 5
Partially fasten centre bolt
first on each side,then place
other bolts on either side and
fully tighten.
Fully tighten armrest bolts and close the zippers.

ASSEMBLY
STEP 7
STEP 8
P
S
I
KL
J
STEP 9
S
H
KL
U