Xtool AutoProPad Basic User manual

AutoProPad Basic
Programmer Platform
User Manual

AutoProPAD Basic Key Programmer
1
Declaration
1. This manual is designed for the use of the AutoProPAD Basic, a smart automotive key
programmer platform. No part of this manual can be reproduced, stored in a retrieval system,
transmitted, in any form, or by any means (electronic, mechanical, photocopying, recording,
or otherwise), without the prior written permission of Xtool.
2. Use of this device only as described in this manual. Xtool shall not be liable for any
incidental, economic, or consequential damages arising from the accidents of individual
users and the third parties, misuse or abuse of the device, unauthorized change, repair of
the device, change of data information, or the failure made by the user not using the product
per the manual.
3. All information, specifications, and illustrations in this manual are based on the latest
configurations and functions available at the time of printing. Xtool reserves the right to
make changes at any time without notice.
4. is a registered trademark of SHENZHEN XTOOLTECH CO., LTD and
XTOOLTECH (USA) INC.
5. In countries that the trademarks, service marks, domain names, logos, and the name
of the company are not registered. Xtool claims that it still reserves the ownership of the
unregistered trademarks, service marks, domain names, logos, and the company name. All
other marks for the other products and the company’s name mentioned in the manual still
belong to the original registered company.
You may not use the trademarks, service marks, domain names, logos, and company
name of Xtool or other companies mentioned without written permission from the
trademark holder.
7. Please visit www.xtooltech.com for more information on the AutoProPAD Basic.
8. Xtool reserves the right for the final interpretation of this manual content.

AutoProPAD Basic Key Programmer
2
Xtool AutoProPAD Basic User Manual Instructions
Please read this user manual carefully before using the scanner.
When reading the manual, please pay special attention to the words “Note”, “Caution”
or “Warning”, read them carefully for appropriate operation.
Xtool AutoProPAD Basic Key Programmer System Main Unit
Maintenance
Avoid shaking or dismantling the unit as it may damage the internal components.
Do not use hard or sharp objects to touch the LCD screen.
Do not use any excessive force.
Do not expose the screen to strong sunlight for a long period.
Caution: Keep it away from water, moisture, high temperature, or very low temperature.
Keep the main unit away from strong magnetic fields.
Operation Instructions
For safe operation, please follow the instructions below:
Keep the scanner away from heat or fumes when using it.
If the vehicle battery contains acid, please avoid any skin contact and keep fire sources
away from the battery during testing.
Exhaust gas of vehicle contains harmful chemicals, please ensure adequate ventilation.
Do not touch the cooling system components or exhaust manifolds when engine is
running due to the high temperatures.
Make sure parking brake is engaged, Vehicle is in Neutral or Park to prevent the vehicle
from moving when engine starts.
Make sure the (DLC) diagnostic link connector is functioning and connected properly
before starting the test to avoid damage to any of the ECUs.
Do not switch off the power or unplug the connectors during testing, otherwise you
may damage the ECUs.

AutoProPAD Basic Key Programmer
3
Contents
CHAPTER ⅠAbout AutoProPAD Basic ............................................................... 4
1. Appearance ....................................................................................................... 4
2. Layout of AutoProPAD Basic Tablet .................................................................. 5
3. AutoProPAD Basic Technical Parameters.......................................................... 5
CHAPTER ⅡHow to Use the AutoProPAD Basic ............................................... 6
1. AutoProPAD Basic Activation............................................................................ 6
2. AutoProPAD Basic Main Interface and Functional Buttons Descriptions ........ 6
3. Vehicle Connection Key Programming.............................................................. 9
3.1. Vehicle Connection Test ................................................................................. 9
3.2. Precautions before Use.................................................................................. 9
4. Key Programming and Special function.......................................................... 10
4.1. Menu Options .............................................................................................. 10
4.2. Key Programming Function (Immobilizer, Smart Key, Remote &etc.) ........ 11
5. Settings............................................................................................................ 29
6. XCloud (English version is coming soon)......................................................... 30
7. Update............................................................................................................. 30
8. Report.............................................................................................................. 31
8.1. PDF Files ....................................................................................................... 31
8.2. Pictures......................................................................................................... 32
8.3. Data Replay .................................................................................................. 32
9. Remote ............................................................................................................ 32
CHAPTER ⅢExamples of Diagnostic Link Connector Locations .................... 34
1. Diagnostic Link Connectors Locations of Various Vehicle Models ................. 34
2. Location Diagram of Vehicle OBDII Connectors.............................................. 34
3. Diagnostic Link Connectors Terminal Definition and Communication
Protocols ......................................................................................................... 35
3.1. Standard OBDII Diagnostic Link Connector ................................................. 35

AutoProPAD Basic Key Programmer
4
CHAPTER ⅠAbout AutoProPAD Basic
1. Appearance
1.1. Front View
1.2. Back View

AutoProPAD Basic Key Programmer
5
2. Layout of AutoProPAD Basic Tablet
①②③
①Micro USB: Battery charge or data synchronization with PC
②DB15 Port: Supports wired connection with car by the cable
③Power Button: Power on or power off
3. AutoProPAD Basic Technical Parameters
Operating System: Android
Processor: Quad-core 1.6GHz Processor
Memory: 1G RAM, 16G FLASH
Display: 7.0 inch touch screen with 1024×600 resolution
Sensors: Gravity sensor, Ambient light sensor
Auto Input/Output: Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack
Power and Battery: 4000mAh, 3.7V lithium-polymer battery
Power Voltage: 5V
Power Consumption: 8W
Operating Temperature: -20 to 50℃(-4 to 126℉)
Humidity: <90%
Dimension (L*W*H): 218×150×29mm

AutoProPAD Basic Key Programmer
6
CHAPTER ⅡHow to Use the AutoProPAD Basic
1. AutoProPAD Basic Activation
1.1. Please activate AutoProPAD Basic before you use it to test vehicles. And please connect
Wi-Fi first.
1.2. Input activation code (on the Quality Certificate cover), product serial number (each
device will have a serial number and activation code), nickname (workshop’s name or user’s
nickname), login account (can be your email address or cell phone number) and password,
the system will then save it. Activation is a one time process. The diagnostic application will
start after activation.
2. AutoProPAD Basic Main Interface and Functional Buttons Descriptions
2.1. Main Interface
Tap on AutoProPAD Basic application icon, the main interface, and sub-menus will be
shown as below.

AutoProPAD Basic Key Programmer
7
2.2. Sub-menus and Function Buttons
Function Buttons Descriptions
Opens the AutoProPAD Basic key programmer application. It can
do key programming, read diagnostic information, view live data,
and special functions.
Users can view all the diagnostic reports and diagnostic data
generated in the process of diagnosis.
Select“Settings”, users can make the language setting and other
system related settings.

AutoProPAD Basic Key Programmer
8
Online Communication platform.(Coming soon)
Provide remote assistance.
Click UPDATE after it connects with internet, then you can
download the latest diagnostic software directly.
2.3. Toolbar Function Buttons
Function Buttons Descriptions
Screen capture
Turn down the volume
Return to previous interface
Show (recently used) applications
Return to the main interface of Android System
Turn up the volume

AutoProPAD Basic Key Programmer
9
Click here to return to diagnostic vehicle models interface
3. Vehicle Connection Key Programming
3.1. Vehicle Connection Test
3.1.1. Wire Connection
a. Turn on AutoProPad Basic tablet.
a. Connect cables and vehicle in following order: ①→②→③→④
b. Switch on the ignition and tap on AutoProPad Basic application to test vehicles.
(shown as follows)
①AutoProPAD Basic Mainframe
②Main Test Cable
③OBDII Connector
④Vehicle
3.2. Precautions before Use
3.2.1. The vehicle power supply must meet the normal voltage limits DC 9-15V.
3.2.2. Users should check the position of the DLC port and ensure the OBDII 16pin connector
as well as the DLC port are properly connected before attempting to communicate to
vehicle.
3.2.3. When taking some special functions tests, users are required to operate the device
per operating instructions. For each vehicle, it has to meet some specific requirements,

AutoProPAD Basic Key Programmer
10
for example, the conditions that some vehicle models need to be reached are as
follows: engine temperature 80℃to 105℃, turn off any loads (such as headlights,
air-conditioner, etc.), put accelerator pedal in released position, and etc.
3.2.4. If users can not find the tested vehicle model or electronic control system in the
AutoProPAD Basic test menu, they need to update the software or consult Xtool
technical service department.
3.2.5. Please ensure that only approved XTOOL cables and connectors are used to prevent
damage to the unit.
3.2.6. Before powering off the unit, please ensure that you cancel, complete the current task
or function, and return to the main interface, then power off.
3.2.7. Do not use any excessive force to operate the touch screen.
3.2.8. During long period of non-use, please disconnect the power and turn off the
AutoProPAD Basic unit.
4. Key Programming and Special function
4.1. Menu Options
4.1.1. After the AutoProPAD Basic main unit is connected to the vehicle via main test cable,
Immobilization can be performed. The Immobilization interface is shown as below.

AutoProPAD Basic Key Programmer
11
4.1.2. Besides the key programming function, AutoProPAD Basic also has special diagnostic
functions for certain vehicles as follows:
4.2. Key Programming Function (Immobilizer, Smart Key, Remote &etc.)
4.2.1. Using Toyota as an example, select Immobilization, then select US Toyota icon. If the
icon is not showing on the screen, please swipe up or down to display it.

AutoProPAD Basic Key Programmer
12
4.2.2. Toolbar function buttons descriptions
Function Buttons Descriptions
Return to previous interface
Print test data
Select icon to record the data log then select the icon again to
send your feedback to XTOOL service center via Wi-Fi
After selecting the data record icon for the second time the data feedback page will
appear as shown below, showing diagnostic software version, vehicle being tested, and the
steps performed in the diagnostic process. Users can then enter the nature of the problem
and any other relevant information then send the form to the Xtool engineering department
via Wi-Fi.

AutoProPAD Basic Key Programmer
13
4.2.3. Key Programming (US Toyota G Key All Keys Lost)

AutoProPAD Basic Key Programmer
14

AutoProPAD Basic Key Programmer
15

AutoProPAD Basic Key Programmer
16

AutoProPAD Basic Key Programmer
17
4.2.4. Smart Key Programming (Prox 3 Reset Smart Key ECU)

AutoProPAD Basic Key Programmer
18