aivituvin AIR09-B User manual

INSTRUCTION
MANUAL
AIR09-B
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’ s instructions as this could void the product
warranty.
01

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
8PCS 14PCS+1 spare
P1 P2
P3 P4
P5
02
M6.0x65mm BOLT
M3.5x50mm SCREW
4PCS+1spare
M3.5x40mm SCREW M3.5x35mm SCREW
6PCS+1spare
M3.5x25mm SCREW
19PCS+1 spare
P6
M3.5x20mm SCREW
8PCS+1 spare

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
DEF
F1
1PC
Roof
Roof
Front panel
1PC
Back panel
1PC
Side panel
03
GH
1PC 1PC
1PC
1PC
2PCS
Bottom panel of huntch
2PCS
Bottom panel of pen
Left panel of fence Short panel of back fence

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
I J K
LMN
O
1PC
Roof cap
Right panel of fence
1PC
Ramp step
04
1PC
1PC
3PCS
Roof of front panel
1PC
Right ramp frame
Front and back panel of
fence
2PCS
Left ramp frame

PRODUCT ASSEMBLY
01
02
05
Attach the roof of front panel Part L to the Part A with 2xP6 screws.
P6X2
Connect Part A, Part B and two pieces of Part C with 8xP1 bolts.
L
X4
B
CA
C
P1
X4
P1

PRODUCT ASSEMBLY
03
04
06
Put down two pieces of bottom panels Part D into the hutch.
Attach bottom panel of the pen Part E to the hutch with 6xP6
screws.
Dx2
E
X6
P6

PRODUCT ASSEMBLY
05
06
07
Attach front panel of fence Part I with 4xP2 screws.
Attach right panel of fence Part J with 4xP2 screws.
I
P2 X2
P2 X2
J
P2 X2
P2 X2

PRODUCT ASSEMBLY
07
08
08
Attach back panel of fence Part I with 4xP2 screws.
Attach short panel of back fence Part H with 2xP3 screws.
P2 X2
P2 X2
I
P3 X2
H

PRODUCT ASSEMBLY
09
10
09
Attach short panel of left fence Part G by 2xP3 screws and
2xP2 screws.
Attach Part M, Part N and three pcs of Part K with 12xP4
screws.
G
P3 X2
P2 X2
N
Kx3
M
P4 X12

PRODUCT ASSEMBLY
11
12
10
Attach the ramp to the hutch with 3xP4 screws.
P4 X3
①Attach the roof Part F and Part F1 with 4xP4 screws.
②Notice to level up the same line with two roof.
F1 F
X4
P4

PRODUCT ASSEMBLY
13
11
Screw the roof cap Part O into the roof with 6xP5 screws.
O
P5 X6

HELP CENTER
[email protected]
Question about your product? we're here to help contact us via
Returns & Refunds
?
Product AssemblyOrders FAQProduct inquiry
THANK YOU
Thanks for your support to Aivituvin.
Your satisfaction is our #1 priority.
Once the items are received, opened, and deemed to be faulty
or other problems.
Pls contact us at [email protected] for the solution.
We will feedback to you within 24 hours.
If you are happy with the shopping ,welcome to share photos
and thoughts with others .
www.aivituvin.com
12

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.