aivituvin AIR 29 User manual

INSTRUCTION
MANUAL
AIR 29
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
02
M3.5x40mm SCREW
M3.5x60mm SCREW
8PCS+1spare 12PCS+1spare
P3 P4
M3.0x16mm SCREW
M3.5x20mm SCREW
8PCS+1spare 6PCS+1spare
P5 P6
M3.0x16mm SCREW
4PCS+1spare Spring latch
3PCS
P7
Lock
1PC
P8
Connector
(Only for the coop and enclosure combination
not available for one enclosure owner)
2PCS

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
BC
DE
1PC
1PC 1PC
03
1PC
1PC
Left side of the front panel
Right side of front panel
Left panel
F
1PC
Right panel
G H
2PCS
1PC
Roof
Perch
A
Left side of the back
panel
Right side of the back
panel

PRODUCT ASSEMBLY
01
02
04
Attach the front panel to the side panel Part E & F by 2xP2 each side.
Attach the front Part B to Part A by 2xP1.
B
A
E
P
2
X
2
P
1
X
2
F
P
2
X
2

PRODUCT ASSEMBLY
03
05
Attach the back Part D to Part C by 2xP1.
D
04
Attach the back panel to the side panels by 2xP2 each side.
P2
X2
P1
X2
C
P2
X2

PRODUCT ASSEMBLY
05
06
06
Attach the roof Part G by 4xP2 as show on the picture.
P2
X4
Hx2
G
Insert the perch Part H into slots inside front and back panel.

PRODUCT ASSEMBLY
07
07
08
①Attach the spring latch P6 to the back door by 2xP4.
②Screw the lock P7 by 4xP5.
P6
X1
Attach the spring latch P6 to the front door and side door by 2xP4
each.
P4
X2
P6
X1
P4
X2
P6
X1
P4
X2
Finish here for using the enclosure alone !
P7
X1
P5
X4

08
Notice
Read Before Assemble!
The below steps are using for the chicken coop and enclosure combination
pls ignore if you don't have chicken coop.
AIR29 can attach to coop AIR27,AIR31,AIR32.
①
②
Pls refer to page 16 .
AIR29+AIR31:
AIR29+AIR32:
Pls refer to page 17 to page 18.

09
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR27 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR27.
There are 3 different combination for your optional choice.
①
②
Option 1
Pls refer to page 10-11.
Option 2
Option 3
Pls refer to page 12-13.
Pls refer to page 14-15.

09
10
Take out the casters of coop.
OPTION 1
Take out the right side pen panel of coop.
Take out the small door of left panel of enclosure.
①
②
③

10
11
P3
X4
OPTION 1
Use the connector P8 to combine the coop and enclosure by
4XP3 each side.
P8
X1
P3
X4
P8
X1

OPTION 2
11
12
Take out the casters of coop.
Take out the right side pen panel of coop.
Take out the spring latch of the front door of enclosure.
①
②
③
④Push upward the hinge to take out the front door of enclosure.
Push upward
to take out

OPTION 2
12
13
Use the connector P8 to combine the coop and enclosure by
4XP3 each side.
P3
X4
P8
X1
P3
X4
P8
X1

OPTION 3
13
14
①
②
③
④
Take out the casters of coop.
Take out the spring latch of the pen of coop.
Push upward the hinge to take out the door of the front pen of
enclosure.
Take out the small door of left panel.
Push upward
to take out

OPTION 3
14
15
P8
X1
P3
X4
Use the connector P8 to combine the coop and enclosure by
4XP3 each side.
2
Finish here for AIR29 and AIR27 combination
P8
X1
P3
X4

15
16
Push upward to take out the small door of right panel of coop.
Take out the samll door of left panel of enclosure.
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR31 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR31.
①
②
Push upward
to take out
16
Use the connector P8 to combine the coop and enclosure by
4XP3 each from front & side.
2
P8
X1
P3
X4
P8
X1
P3
X4
Finish here for AIR29 and AIR31 combination

17
17
Take out the right side panel of coop.
Take out the samll door of left panel of enclosure.
Notice
Read Before Assemble!
The below steps are using for chicken coop AIR31 and enclosure AIR29
combination,pls ignore if you don't have chicken coop AIR31.
①
②
18
Use the connector P8 to combine the coop and enclosure by
4XP3 each side.
P8
X1
P3
X4
2

PRODUCT ASSEMBLY
19
Use the connector P8 to combine the coop and enclosure by 4xP3
each side.
2
P8
X1
P3
X4
18

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.