aivituvin AIR69 User manual

I
AIR69
www.aivituvin.com
NSTRUCTION
MANUAL

Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure
every 90 days.
Fasten screws loosely during initial assembly. Do not
fully tighten screws until the item is completely
assembled.
Do not use or store this item in the proximity of open
flame or flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop
using this product until repairs are made and/or factory
replacement parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future
NOTICE
01

02
PHILLIPS
SCREWDRIVER DRILL (RECOMMENDED) 2PERSON ASSEMBLY APPROXIMATELY 60MIN. ASSEMBLY
M6.0x50 mm BOLT
8PCS+1 spare
M4.0x40 mm SCREW
16PCS+1 spare
M3.5x60 mm SCREW
4PCS+1 spare
M3.5x35 mm SCREW
6PCS+1 spare
TOOLS REQUIRED
HARDWARE
P1 P2
P3 P4
P5 P6
M3.5x25 mm SCREW
6PCS+1 spare
M3.0x16 mm SCREW
28PCS+1 spare
Hinge
2PCS
P5 P6
P7 P8
Lock
1PC

03
PARTS
A
B
Front panel
1PC 1PC
Back panel
C
1PC
Left panel
D
E
Right panel
1PC 1PC
Tray
F
2PCS
Perch
G1 G2
Left panel of nesting box
2PCS 2PCS
Right panel of nesting box
H
Front panel of nesting box
2PCS

04
PARTS
Bottom of nesting box
2PCS
I
JK
Divider of nesting box
2PCS
Roof of nesting box
2PCS
Roof of coop
1PC
LT
2PCS
PVC Waterproof Strip
Hardware bag

PRODUCT ASSEMBLY
01
Attach the front & back panel Part A & B to the side panel Part C & D by 8xP2.
05
A
C
BD
P2 X8
02
①
②Slide in the metal tray Part E.
Insert the perch Part F into the slots inside the front and back panel.
E
Fx2

PRODUCT ASSEMBLY
Attach the side panels of nesting box Part G1 & G2 to the left side of coop by bolt 4xP1.
03
06
G2
G1
04
Attach the side panels of nesting box Part G1 & G2 to the right side of coop by bolt 4xP1.
P1 X4
G2
G1
P1 X4

PRODUCT ASSEMBLY
05
Screw the side panel of nesting box to the front panel of nesting box Part H by 4xP2 each
side.
06
①Drop in the bottom of nesting box Part I.
②Slide in the divider Part J.
07
P2 X4
P2 X4
H
H
I
IJ
J

PRODUCT ASSEMBLY
08
07
Attachthenesting box roof Part K to the nesting box by 4xP6 each side.
Make sure the lock is functioning properly before locking the roof.
08
P6 X4
K
P5 X3
P6 X4
K
T
P5 X3
T
Attached PVC Waterproof Strip Part T to the nesting box by 3XP5 each.
①
②

PRODUCT ASSEMBLY
09
Attachthecoop roof Part L to the coop by 6xP6. 
10
09
L
P6 X6
P6 X6
P7 X1
Attach the lock P7 to the tray by 6XP6.

PRODUCT ASSEMBLY
12
①Pls ignore the following for only one coop owner !
11
Attach the roof hinge P8 to the coop by 4XP6 each side.
10
P8 X1
P6 X4
P8 X1
P6 X4
P3 X4
②Attach the run to the coop by 4XP3 screws.
Finish

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury,property damage or loss,whether direct,indirect,or incidental,resulting from
the incorrect attachment,improper use,inadequate miantenance,or neglect of this